The black DPA 4065 Omnidirectional Headset Microphone for Shurefrom DPA 4065 Omnidirectional Headset Microphone for Shureis designed for unobtrusive use on-stage and in the studio. The mic features a neutral sonic character that is designed for accurate reproduction of the human voice.

Designed for Unobtrusive Use    On-Stage and Studio Applications    Close Mic Applications    Bendable Headset

Fits any head shape

Resistant to humidity

Related Questions and Answers

Q: 1. Could this be a solution if we want to capture a voice with it and send it via a radio transmitter? By using for example two DAD6034 and a Y adapter cable (mini-jack splitter) to connect everything to the wireless transmitter? If the transmitter only supports one input, we will lose stereophony, but this is not essential in our case. We want to use them instead of a lav mic (camouflage+no rustle).

A: The DPA Microphones 4560 CORE Binaural Microphone is not a good choice for a mic to use with a wireless transmitter since it has two separate output connectors and requires 5 to 10V. A wireless microphone transmitter like one from Sennheiser accepts only one input and sends a mono audio signal to the receiver. What you could do is connect the mic to separate channels on a mixer and then send the left and right audio from the mixer wirelessly to two receivers to maintain the stereophony.

Q: 2. Just purchased the PMHMS20 headset mic. Have been unable to use so far due to the fact of the 4 pin mini-xlr. What adapter do I need to purchase to make this mic compatible w/ standard XLR?

A: You need the Laird Digital Cinema Premium 3-Pin Standard XLR Male to TA3M 3-Pin Mini XLR Male Audio Adapter B&H # LARD1XMTA3M MFR # RD1-XMTA3M which B&H has for under $5, and the device you plug into needs phantom power

Q: 3. How is this mic powered? Is it an electret condenser?

A: The Shure DH5 DuraPlex Omnidirectional Headset Microphone is a condenser microphone that operates using plug-in power of 5V supplied from the mic input on a wireless bodypack transmitter.

Q: 4. Hi, I m wondering if this mic compitible and can be used for Audio Technica Pro 10 wireless system? thanks

A: This microphone has a Shure TA4F connector which is very common and popular. AT body pack uses the HIROSE HR10A-7P-4S connector. So if you want to use this Pyle Pro mic with the AT 10 PRO bodypack you will need an adapter converter cable. The only company that I know that sells such a cable is in England called micronic. The adapter cable is expensive. Alternatively, I have been told AT will install the HIROSE connector to any microphone you send them for $30 per microphone. I think purchasing an adapter cable is the best solution. But I have not tried this idea and so I can not guarantee this will work. I hope this helps

Q: 5. Will this work with the pdwm8900?

A: The TA4F connector attached to the Pyle Pro PMHMS20 is not compatible with the beltpacks supplied with the PDWM8900 system which require a 3.5mm jack.

Q: 6. Does it work with Shure BLX1 Bodypack?

A: Hi, Thank you for reaching out. It depend on the plug that you have in your receiver.

Q: 7. Does DPA4560 require phantom power to operate?

A: The DPA4560 requires 5 to 10V Plug-In Power, which is different from 48v Phantom Power. Plug-In Power is typically provided by wireless transmitters, handheld recorders, and some cameras.

Q: 8. What is TA4S?

A: I assume you meant TA4F-- this is the type of connector on this microphone. Pretty sure it is a Shure proprietary connector, so you would want a mic with this if you're connecting to a Shure wireless system. They are small, round, and have 4 pins. Sometimes they're used for specialty wired mics as well.

Q: 9. Will this mic work with the VocoPro mini xlr transmitter?

A: No, it will not work because the Pyle Pro headset has a 4-pin mini XLR connector and the VocoPro transmitter uses a 3-pin mini XLR connector. For a similar type headset mic in the same price range, you can use the Peavey PV-1 Headset (B&H # PEPV1HS) which has the correct TA3F that is compatible with the VocoPro transmitter.

Q: 10. Is the 3.5mm locking connector compatible with the Sennheiser body packs?

A: Yes, the DPA Microphones Core 4066 Omnidirectional Headset Microphone with 1/8" Mini Jack Connector is compatible with all Sennheiser wireless transmitters that use a 3.5mm locking input connector.