Lian Li Pcie 4.0 Riser Cable 600Mm Black

Lian Li Pcie 4.0 Riser Cable 600mm Black

Product Code: eq100455
Availability: In Stock

$269.97 $337.46

Qty

20 reviews Write a review

Description
Reviews (20)

If you're mounting your graphics card vertically in a mid-tower case, you'll need the Lian Li PCIe 4.0 Riser Cable 600mm Blackto complete the setup. The cable is 600mm long and flexible, allowing it to work with a variety of mounts, such as the Lian Li Upright GPU mount (sold separately). It supports the PCIe 4.0 interface, providing transfer rates of 16 GT/s.

Up 16 GT/s Bit Rate PCIe 4.0 Interface 600mm Cable Length

General
Compatibility	Lian Li O11D EVO
Inputs / Outputs
Connector 1	1x PCIe 4.0
Connector 2	1x PCIe 4.0
Physical
Color	Black
Cable Length	23.6" / 600 mm
Packaging Info
Package Weight	0.59 lb
Box Dimensions (LxWxH)	10.2 x 5.5 x 2.9"

Related Questions and Answers

Q: 1. Is it possible to buy a dust filter kit for Lian Li LANCOOL III?

A: There is not a dust filter kit available for the Lian Li LANCOOL III at this time.

Q: 2. Can the PSU be mounted inside the left side of the case under the motherboard instead of its bay in the right side of the case? Also can the PSU bay be utilized by putting one of the provided hot swap drive cages in it?

A: Yes, the PSU can be mounted on the left side of the Lian Li O11 Dynamic XL Full Tower Case (White) BH #LIO11DXLWif you remove the drive cages from that area. Page 4 of the user guide shows the possible PSU locatons. https://www.bhphotovideo.com/lit_files/608201.pdf

Q: 3. Does the SLIN140-1W fit for exhaust? I know the SL140 v1 fits, but SL140 v2 doesn't unless you remove one of the fan's side panels

A: The Lian Li SLIN140-1W is a 140mm PWM fan, which the Lian Li LANCOOL 216 RGB Mid-Tower Case does have a slot for. However, Lian Li has not provided explicit specs on which cases the fan is or is not compatible with, so this measurement would be the best information available.

Q: 4. Hello.. is this compatible Lian Li PCIe 4.0 Riser Cable to Mother board asus rog strix B550 A gaming?

A: The Lian Li PCIe 4.0 Riser Cable (600mm, Black) is compatible with the ASUS ROG Strix B550-A Gaming AM4 ATX Motherboard.

Q: 5. Can this fit CEB Form factor MB's for example: ASUS WS X299 SAGE/10G LGA 2066 CEB Motherboard?

A: yes this case is compatible with CEB motherboards.

Q: 6. Can this case be used to house an RTX4090 Rog Strix?

A: Yes, an RTX 4090 GPU will fit inside the Lian Li LANCOOL III RGB Tower PC Case.

Q: 7. Can a drive cage be installed in the lowest bay where the PSU normally sits?

A: No, unfortunately only the upper bays can be used for drives on the Lian Li O11 Dynamic XL Full Tower Case (White).

Q: 8. Is it possible to mount the PSU in the left side of the case below the motherboard? Is there a rear panel that allows this configuration so the power cable can run out the back? Please note I'm asking about the left side (with the glass panel. NOT the right side where the drives are installed).

A: No, it is not possible to install the PSU on the left side of the Lian Li O11 Dynamic XL Full Tower Case (White) BH #LIO11DXLW.

Q: 9. Can i replace the front panel with a grill one?

A: I'm sorry, but the Lian-Li 011 case is designed for air intake from the bottom and side of the case, and not from the front. I don't know of any alternate front panel options for it. If you would prefer a full tower case with air intake on the front, I think you may like these: be quiet! Dark Base 900 Full-Tower Case (Silver): https://bhpho.to/3AtMIoj EVGA DG-85 Gaming Windowed Full-Tower Case (Gunmetal Gray): https://bhpho.to/3P4wmq6

Q: 10. can you use this fan as a radiator fan?

A: The Lian Li Uni Fan SL-Infinity Reverse Blade Case Fan is radiator compatible.

Yoonjin	28/09/2024
[1x PCIe 4.0] Overall, very good and clean case that transforms as much as you want to. However, it has some compatible issue with ATX motherboard and 360mm AIO installing on the top orientation. mATX MOBO would be working for Top 360mm AIO. Case color is just pure cold white. warm white / off white part will have noticeable color difference. 5

Tyler	27/09/2024
[1x PCIe 4.0] These are the best money can buy. Make sure to pair with the 24 pin for the complete setup. Amazing quality. 5

Anthony	26/09/2024
[Black] It's a great SFF case, and is small enough to be mobile. 5

Jeffrey	24/09/2024
[1x PCIe 4.0] To put it in simple terms this is an excellent value for a mid-tower case in this price bracket. It isn't perfect in every way but there is very little not to like about it. My build is running a Ryzen 9 cpu which does run on the hot side but this case is more than capable of keeping things well within the acceptable temperature range and that's with air cooling only! You will search long and hard to find a better value than this Lian-Li case. You can't go wrong for $89.00. It's attractive AND it performs. 5

Josediego	06/09/2024
[Black] Tower is more impressive than I thought, has everything you need and works amazingly well with all your components. 5

Gudjon	06/09/2024
[1x PCIe 4.0] I used this as the back cooling in the LANCOOL III RGB case and it looks fantastic. The four corner light rims give this a very nice extra touch. 5

Michael	04/09/2024
[1x PCIe 4.0] Perfect for any build. Best case for ITX. 5

Kent	17/08/2024
[1x PCIe 4.0] This is my first build and the case looks and works great with the parts I installed. Very satisfied with my purchase. 5

Ronald	15/08/2024
[0.59 lb] You know the Lian Li O11 Dynamic is an amazing case and popular for anyone looking to show off their build. The Mini brings that size to something more my style. As a fan of Mini-ITX and Micro-ATX, the normal O11 line is just too big. This can fit a full ATX board, but fills up perfectly with a Micro-ATX and 360 radiator on top. If you're more into air, there is an air variant that is better suited for airflow. But for water cooling of any kind this thing rocks. 5