Securely attach a Sony L-series type battery to your camera cage or rod bracket using the ZILR L-Series Battery Plate for Google SEOfrom ZILR. This mechanical plate provides physical support only and is designed for use with batteries with a DC output port. The plate has a push-button battery release and is mounted using the included 1/4"-20 screws.

Sony L-Series Type/NP-F Battery Plate    Non-Electronic, Mechanical Plate    Mounts on Bracket or Cage    Button Release, 2 x 1/4"-20 Screws

Sony L-series type (NP-F) batteries

Related Questions and Answers

Q: 1. Can I move the locating pins to the holes next to the screw instead of above and below?

A: Yes, the locating pins have two positions and can be used in horizontal or vertical orientation on the Tilta L-Series Battery Plate.

Q: 2. How Is battery life?

A: The Google Video Doorbell (Battery, Linen) will last a while if there is minimal motion that the camera sees. It can last a few months.

Q: 3. Is this compatible with the BMPCC 6k G2?

A: Along with the surrogate 2.5mm to 2-Pin Power Cable for Blackmagic Pocket Cinema Camera, the SmallRig L-Series Battery Adapter Plate Lite will allow for a battery connected to power the Blackmagic Design Pocket Cinema Camera 6K G2/6K Pro/6K/4K.

Q: 4. Will this work with the new ace 750 transmitter?

A: No, the Teradek Ace Battery Plate for Sony B Series would not be compatible with the Teradek Ace 750 Wireless Video Transmitter. Teradek doesn't have a B series battery plate for the Teradek Ace 750, but the Teradek L-Bracket Battery Adapter Plate for Canon LP-E6 & Sony L-Series Batteries, BH #TE110848, would be compatible with L series batteries.

Q: 5. What size are the DC output pins?

A: The barrel sizes for the Tilta L-Series Battery Plate outputs are DC 5.5 X 2.5mm, which will fit in the 12V DC, and the DC 5.5 x 2.1mm, which will fit in the 8V DC.  One is DC 12V:DC55-25:5.5-2.5mm, One is DC 8V:DC5521:5.5-2.1mm.

Q: 6. How do I move the locating pins from the horizontal to vertical position? I’ve tried pulling them out with pliers with no luck.

A: You could use Needle nose pliers would allow you to remove the screws. The pins unscrew like normal screws.

Q: 7. will you still receive notifications via your mobile device or your Google Assistant-enabled speakers when someone presses the doorbell when wired?

A: The unit gets wired to power and then connects via Wireless to your network.

Q: 8. What's the battery life on this and how long does it take to cahrge?

A: The battery for the Google Video Doorbell (Battery, Ash) BH #GONDBBA is rated to last 1.5 to 6 months. Battery life will depend on factors including activity, temperature, and camera settings that you select. You can extend the battery life of your camera by adjusting video quality, length of video clips, time between recorded events, and using activity zones to monitor specific areas. When the battery power is low, the doorbell will enter "low power" mode to conserve the battery until until the doorbell is recharged; A full charge is reached in about 5 hours.

Q: 9. Whats is the Amps output on the 12vdc side ?

A: SmallRig has not provided that specification.

Q: 10. existing doorbell wiring will power unit? Will house door chime/bell still work?

A: Yes, you can wire the Nest Hello to you home chime/bell. You need 24VAC power to the unit.