Intelix Usb-Wp-H-W Usb Twisted Pair Wall Plate Extender

Intelix Usb-wp-h-w Usb Twisted Pair Wall Plate Extender

Product Code: eq10068
Availability: In Stock

$200.19 $250.24

Qty

20 reviews Write a review

Description
Reviews (20)

The Intelix USB-WP-H-W Full Speed USB Twisted Pair Wall Plate Extender transmits low speed USB 1.0 and 2.0 signals up to 330.0' (100.5m) and full speed USB 1.0 and 2.0 signals up to 100.0' (30.4m) over twisted pair cabling. The White Decora insert allows installation in any setting, facilitating a clean and low profile installation. The unit is plug-and-play and hence does not require additional driver software. The extender uses the same USB circuit as the AVO-USB and PMI-A9 for installation flexibility.

I/O Connections
USB	1 x Female USB Type B
Twisted Pair	1 x 8P8C port (Shielded RJ45)
Support
Maximum Distance	12 Mb/s: 100.0' (30.4 m), 1.5 Mb/s: 300.0' (91.4 m)
RJ45 Pin Configuration	Pin 1: Data + Pin 2: Data - Pins 3, 4, 5, and 6: GND Pins 7 and 8: 5V DC
Environmental
Enclosure	ABS Plastic
Operating Temperature	+32 to +104°F (0 to +40°C)
Operating Humidity	20 to 90%, Non-condensing
Storage Temperature	+14 to +140°F (-10 to +60°C)
Power
Maximum Power Consumption	2.5 W
Power	Via USB output of host device Vbus Power: 5 VDC
Extension	High Power Device Extension (< 500 mA draw): 30.0' (9.1 m) Low Power Device Extension (< 100 mA draw): 200' (60.9 m) Self Powered Device Extension (0 mA draw): 330' (100.5 m)
ESD Protection	Contact Discharge: 2 kV Air Discharge: 4 kV IEC61000-4-2 1995
Regulatory	CE, RoHS
Indicators	Power and Status LEDs
Dimensions	Housing: 1.57 x 1.18 x 0.87" (40.00 x 30.00 x 22.00 mm) Total: 1.65 x 4.06 x 1.43" (42 x 103.2 x 36.5 mm)
Packaging Info
Package Weight	0.1 lb
Box Dimensions (LxWxH)	4.8 x 2.9 x 2.3"

USB 2.0 full speed 12Mb/s, USB 1.1 legacy support

Up to 330' (100.5m) cable length on U/UTP category 5/5e/6

No external power required, uses host device's 5V power

USB B female (client) to RJ-45 jack connectivity

White Decora insert with matching surround

Requires compatible host end

Uses any Cat5/5e/6/6A twisted pair cabling

Extension of USB 1.1 and 2.0 full speed signals

Plenum routing of USB 1.1 and 2.0 full speed

Suitable for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

Related Questions and Answers

Q: 1. Does this kit work with MacOS? I can't get it to work with a Mac Mini M1 running MacOS 11.4.

A: The Intelix AVO-USB-C Client Side USB Extender and AVO-USB-H Host Side USB Extender Kit Supports Cat 5, 5e, 6, or 6e Cables. Verify the desired twisted pairs are not being used for other LAN or telephone equipment. The RJ45 pinout in the twisted pair cabling should conform to the EIA/TIA 568A or 568B standard.

Q: 2. Will this support 1920x1200?

A: System Range : 1080i,1080p, at different distances and BC-DGKat 524.

Q: 3. Please, how many units can be attached in daisy chain?

A: In theory, until you run into a device that no longer meets the HDCP negotiation or until you run out of keys to negotiate. That said, there is a limit to how much distance you'll get on a particular type of cable. For the most distance, you need shielded cat6 or better.

Q: 4. What type of power supply is shipped with the device? Is is a normal DC wall pack, or is it the PS-1202?

A: It is a wall-wart style DC power adapter.

Q: 5. Will this work with another brand of transmitter? In other words, are there different protocols or a standard one for converting signals?

A: Sorry, but the Kramer HDMI over Twisted Pair Receiver B&H # KRPT572P can only be used with a dkgat product like the VM-114H4C, VM-1H4C or pt-571.

Q: 6. What is the max length of hdmi input cable for this aten ve806t?we tried using 5m hdmi but flickering happens

A: This unit can support up to 40m of cable for 1080p resolutions. If you're seeing flickering, we'd recommend slowly changing the EQ dial on the receiver side and see if a different number works better.ATEN Support

Q: 7. what is the max resolution that this will support?

A: This for HDMI, I.E 1080p.

Q: 8. Is there any audio delay or sync issues with audio and video?

A: There should be no audio delay or sync issues with this unit. It also will have a very low latency.

Q: 9. Would this work well for a USB Z-Wave stick? Distance is around 50 feet.

A: Yes, the Full Speed USB Extender will work with the USB Z-Wave stick.

Q: 10. Does the USB-C input support video or is it charging and USB only?

A: The Comprehensive HDMI and USB Type-C Pigtail Wall Plate (White), BH # COWPDHDU3CAW, supports data transfer speed up to 5 Gb/s and is compatible with USB 2.0 devices.

Charles	26/09/2024
[0.1 lb] This is a matching set, so use both pieces. Does the job. 5

ahinesobc	24/09/2024
[2.5 W] Need to send video over distances greater than the limits of HDMI? Look no further... just make sure you buy it with the transmitter. 5

MACDdaddy	11/09/2024
[0.1 lb] We needed this for a church set up. We are running a video camera and to get the HDMI signal back to the booth we tried these out. Our church also uses a rec/tran pair to get HDMI up to our projector. Kramer makes good sturdy products this is no exception. This is the Receiver you do need to purchase the Transmitter PT-571 to make a pair. Both come with a power supply you only need to power one end. This did work just fine with a pre-made 100 foot cat5 cable. If I was going longer distance I would make sure to use cat6 cable. Good Luck... Rob 5

Theodore	28/08/2024
[2.5 W] I have several pairs of PT-571/PT-572+ transmitter/receivers. They work the first time... every time. Picture and sound are great. Very little delay. I have cable lengths as long as 250 feet. 5

edgar	13/08/2024
[ABS Plastic] we bought these to relocate our presentation remote receiver close to the front of our church. we used a 100' cat6a cable, used a usb cable to connect from laptop to host, the a usb extension cable from client to remote receiver. Works perfectly. love that they are very compact, very easy to hide. 5

anyonymous	09/08/2024
[0.1 lb] The product worked as advertised. The product is small and was used on a USD serial device 100' away. Great value for the money. 5

Woodrow	24/07/2024
[ABS Plastic] Used in a church sanctuary to send HDMI long distances and does it job. The green/orange/red indicator is very handy as well as the surface mounting hardware. 5

ahinesobc	18/07/2024
[CE, RoHS] Need to send video beyond the limits of HDMI? Look no further... This hardware just works. 5

Jon	13/07/2024
[2.5 W] These little pico tools from Kramer are an excellent solution at a good price point. Using these with 572 receivers and a Kramer 2x4 HDMI distro on the front end to send presentations to three screens over 100' of qualified (Kramer uniKat) CAT6 cable. It just works. No latency, no glitching, no resolution limits up to and including 1920 x 1080. Rack amount accessories make for a clean, manageable installation. The 572 receivers get power over ethernet, so no wall wart required at the receiver end. 5

Michael	29/06/2024
[2.5 W] This product works GREAT! This was a relatively short run (30') so Cat 5e worked just fine. Both devices powered from one end (Input TX) with this install. They were available, affordable and easy to install. The Power Supply is an inline DC supply, not a plug-in wall wart. This has been my go to HDMI extender kit. Kramer devices always works. 5