Intelix Usb-Wp-H-I Usb Wall Plate Extender

Intelix Usb-wp-h-i Usb Wall Plate Extender

Product Code: eq10069
Availability: In Stock

$102.84 $135.75

Qty

5 reviews Write a review

Description
Reviews (5)

The Intelix USB-WP-H-I Full Speed USB Twisted Pair Wall Plate Extender transmits low speed USB 1.0 and 2.0 signals up to 330.0' (100.5m) and full speed USB 1.0 and 2.0 signals up to 100.0' (30.4m) over twisted pair cabling. The Ivory Decora insert allows installation in any setting, facilitating a clean and low profile installation. The unit is plug-and-play and hence does not require additional driver software. The extender uses the same USB circuit as the AVO-USB and PMI-A9 for installation flexibility.

I/O Connections
USB	1 x Female USB Type B
Twisted Pair	1 x 8P8C port (Shielded RJ45)
Support
Maximum Distance	12 Mb/s: 100.0' (30.4 m), 1.5 Mb/s: 300.0' (91.4 m)
RJ45 Pin Configuration	Pin 1: Data + Pin 2: Data - Pins 3, 4, 5, and 6: GND Pins 7 and 8: 5V DC
Environmental
Enclosure	ABS Plastic
Operating Temperature	+32 to +104°F (0 to +40°C)
Operating Humidity	20 to 90%, Non-condensing
Storage Temperature	+14 to +140°F (-10 to +60°C)
Power
Maximum Power Consumption	2.5 W
Power	Via USB output of host device Vbus Power: 5 VDC
Extension	High Power Device Extension (< 500 mA draw): 30.0' (9.1 m) Low Power Device Extension (< 100 mA draw): 200' (60.9 m) Self Powered Device Extension (0 mA draw): 330' (100.5 m)
ESD Protection	Contact Discharge: 2 kV Air Discharge: 4 kV IEC61000-4-2 1995
Regulatory	CE, RoHS
Indicators	Power and Status LEDs
Dimensions	Housing: 1.57 x 1.18 x 0.87" (40.00 x 30.00 x 22.00 mm) Total: 1.65 x 4.06 x 1.43" (42 x 103.2 x 36.5 mm)
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	4.7 x 3.3 x 1.9"

USB 2.0 full speed 12Mb/s, USB 1.1 legacy support

Up to 330' (100.5m) cable length on U/UTP category 5/5e/6

No external power required, uses host device's 5V power

USB B female (client) to RJ-45 jack connectivity

Ivory Decora insert with matching surround

Requires compatible host end

Uses any Cat5/5e/6/6A twisted pair cabling

Extension of USB 1.1 and 2.0 full speed signals

Plenum routing of USB 1.1 and 2.0 full speed

Suitable for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

Related Questions and Answers

Q: 1. Can this be used with a USB hub? In particular, a USB 3 hub on the device end? I'm only expecting USB 2.0 speeds. A competing device only worked with some USB 3.0 hubs.

A: The IOGEAR USB 2.0 BoostLinq Ethernet Extender has to be connected directly to the computer. Now as far as using it with a USB hub on the device end, it may be possible. If you are planning to use it that way, then I recommend to get a USB hub with external power.

Q: 2. Will this work with the Canon R5?

A: The iLuv 45W USB Type-C Wall Charger BH #ILIAD545CULB would be able to charge a battery inside the Canon R5, however, it would not work as a power supply to keep the camera running if there is no battery inside the camera.

Q: 3. Is this charger the correct voltage for iPhone 12 Pro Max and iPad? Thank you.

A: Unfortunately, the ChargeWorx 4-Port USB Travel Wall Charger does not list the exact wattage. I recommend the ANKER 33W 2-Port USB-C/USB-A Wall Charger with USB-C Cable BH #ANB2326J211 because it lists it as being 33 watts and that is enough for the iPhone 12 Pro Max and the iPad.

Q: 4. Does the USB-C input support video or is it charging and USB only?

A: The Comprehensive HDMI and USB Type-C Pigtail Wall Plate (White), BH # COWPDHDU3CAW, supports data transfer speed up to 5 Gb/s and is compatible with USB 2.0 devices.

Q: 5. I am trying to send a usb signal from an m32 soundboard. will this be compatible with it?

A: Yes. But you will only get the rated distance stated on B&H for the protocol that your device uses so take that into consideration. Also there is an IC at each end if the cat6 so it will add a but of latency to the round trip

Q: 6. Would this work well for a USB Z-Wave stick? Distance is around 50 feet.

A: Yes, the Full Speed USB Extender will work with the USB Z-Wave stick.

Q: 7. what is the appropriate receiver for the Intelix USB-WP-C-W Full Speed USB Twisted Pair Wall Plate Extender ?

A: The Intelix USB-WP-H-W (http://bhpho.to/1PIO0db) is the proper host side for this client plate.

Q: 8. What is the max length of hdmi input cable for this aten ve806t?we tried using 5m hdmi but flickering happens

A: This unit can support up to 40m of cable for 1080p resolutions. If you're seeing flickering, we'd recommend slowly changing the EQ dial on the receiver side and see if a different number works better.ATEN Support

Q: 9. could I use this in Israel?

A: The Xuma USB Wall Charger (Europe) BH #XUCAC124E can be used in Israel.

Q: 10. Assuming a high quality cable, will this be able to provide full USB 2.0 480 mpbs speeds at 164 feet? Thanks!

A: Yes, USB 2.0 can travel without signal degradation over 164 feet.

Kyle	19/09/2024
[2.5 W] Deployed this product along with BH# INUSBWPCW at one of our sites on Monday. So far works great! 5

Thomas	06/09/2024
[0.15 lb] B&H description says 25', but this must be for high demand situations, such as video. I connected a mouse with 100' of Cat 6 cable and worked fine. As you can see, very small and requires no external power. 5

Charles	05/09/2024
[2.5 W] This is a matching set, so use both pieces. Does the job. 5

William	29/06/2024
[CE, RoHS] iPhone connection to stereo on boat. Looks great installed - very professional. No negatives. 5

anyonymous	12/06/2024
[ABS Plastic] The product worked as advertised. The product is small and was used on a USD serial device 100' away. Great value for the money. 5