Intelix Usb Wall Plate Extender - Full Speed Twisted Pair

Product Code: eq10073
Availability: In Stock

$105.00 $164.85

Qty

11 reviews Write a review

Description
Reviews (11)

The Intelix USB-WP-C-I Full Speed USB Twisted Pair Wall Plate Extender transmits low speed USB 1.0 and 2.0 signals up to 330.0' (100.5m) and full speed USB 1.0 and 2.0 signals up to 100.0' (30.4m) over twisted pair cabling. The Ivory Decora insert allows installation in any setting, facilitating a clean and low profile installation. The unit is plug-and-play and hence does not require additional driver software. The extender uses the same USB circuit as the AVO-USB and PMI-A9 for installation flexibility.

I/O Connections
USB	1 x Female USB Type A
Twisted Pair	1 x 8P8C port (Shielded RJ45)
Support
Maximum Distance	12 Mb/s: 100.0' (30.4 m), 1.5 Mb/s: 300.0' (91.4 m)
RJ45 Pin Configuration	Pin 1: Data + Pin 2: Data - Pins 3, 4, 5, and 6: GND Pins 7 and 8: 5V DC
Environmental
Enclosure	ABS Plastic
Operating Temperature	+32 to +104°F (0 to +40°C)
Operating Humidity	20 to 90%, Non-condensing
Storage Temperature	+14 to +140°F (-10 to +60°C)
Power
Maximum Power Consumption	2.5 W
Power	Via USB output of host device Vbus Power: 5 VDC
Extension	High Power Device Extension (< 500 mA draw): 30.0' (9.1 m) Low Power Device Extension (< 100 mA draw): 200' (60.9 m) Self Powered Device Extension (0 mA draw): 330' (100.5 m)
ESD Protection	Contact Discharge: 2 kV Air Discharge: 4 kV IEC61000-4-2 1995
Regulatory	CE, RoHS
Indicators	Power and Status LEDs
Dimensions	Housing: 1.57 x 1.18 x 0.87" (40.00 x 30.00 x 22.00 mm) Total: 1.65 x 4.06 x 1.43" (42 x 103.2 x 36.5 mm)
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	4.8 x 3.3 x 2.3"

USB 2.0 full speed 12Mb/s, USB 1.1 legacy support

Up to 330' (100.5m) cable length on U/UTP category 5/5e/6

No external power required, uses host device's 5V power

USB A female (client) to RJ-45 jack connectivity

Ivory Decora insert with matching surround

Requires compatible host end

Uses any Cat5/5e/6/6A twisted pair cabling

Extension of USB 1.1 and 2.0 full speed signals

Plenum routing of USB 1.1 and 2.0 full speed

Suitable for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

Related Questions and Answers

Q: 1. What type of power supply is shipped with the device? Is is a normal DC wall pack, or is it the PS-1202?

A: It is a wall-wart style DC power adapter.

Q: 2. Does this support 1920x1200?

A: Yes, the Kramer HDMI over Twisted Pair Receiver supports 1920x1200.

Q: 3. Will this work with another brand of transmitter? In other words, are there different protocols or a standard one for converting signals?

A: Sorry, but the Kramer HDMI over Twisted Pair Receiver B&H # KRPT572P can only be used with a dkgat product like the VM-114H4C, VM-1H4C or pt-571.

Q: 4. What is the max length of hdmi input cable for this aten ve806t?we tried using 5m hdmi but flickering happens

A: This unit can support up to 40m of cable for 1080p resolutions. If you're seeing flickering, we'd recommend slowly changing the EQ dial on the receiver side and see if a different number works better.ATEN Support

Q: 5. Please, how many units can be attached in daisy chain?

A: In theory, until you run into a device that no longer meets the HDCP negotiation or until you run out of keys to negotiate. That said, there is a limit to how much distance you'll get on a particular type of cable. For the most distance, you need shielded cat6 or better.

Q: 6. Will this work with a vga signal?

A: This model is made for HDMI specifically.

Q: 7. I want to use to extend by printer with cat 6- 35 feet with usb output? also a scanner? also a acanner with usb output

A: Yes, you can use the Intelix Full-Speed USB Extender - Transmitter and Receiver Kit to extend the USB 2.0 connection between a printer and scanner to a computer.

Q: 8. I am able to send USB signal from my M32r console to my mac book pro, running Logic Pro X... but I am not receiving any audio from the console to Logic. I've tried several different cat cables at different lengths, but still no luck. When I remove the transmitter and receiver from the equation, it works great. Any ideas as to why my computer recognizes the console while using the extender kit but will not pass any audio?

A: This would be heavily dependent on your specific situation the adapter itself is limited to USB Full Speed (12 Mbps): 100' (30.48 m) and USB Low Speed (1.5 Mbps): 330' (100.58 m). Your audio issue may be coming from the devices limited bandwidth.

Q: 9. Is there any audio delay or sync issues with audio and video?

A: There should be no audio delay or sync issues with this unit. It also will have a very low latency.

Q: 10. Is this sufficient for file transfer? Use case would be mounting external HD to NAS from across CAT6A tie lines. So I can back up NAS files without going to the basement or through the network.

A: It would not be recommended for data integrity. It is also going to be slow this is USB 2 speed.

ahinesobc	29/09/2024
[CE, RoHS] Need to send video over distances greater than the limits of HDMI? Look no further... just make sure you buy it with the transmitter. 5

Theodore	26/09/2024
[0.15 lb] I have several pairs of PT-571/PT-572+ transmitter/receivers. They work the first time... every time. Picture and sound are great. Very little delay. I have cable lengths as long as 250 feet. 5

anyonymous	18/09/2024
[2.5 W] The product worked as advertised. The product is small and was used on a USD serial device 100' away. Great value for the money. 5

Randy	13/09/2024
[ABS Plastic] My rating on this piece of equipment It is as follows. It performs above and beyond what I could imagine, easy to set up great quality! The service from B&H Photo sales staff was awesome as well I cannot recommend this more highly. I have a total of 4 of these units and they all work perfectly Kramer is awesome with their service and support as well. 5

david	07/09/2024
[0.15 lb] These have worked perfectly from the time I got them. They are also less complicated than others in that the far end doesnt need electrical plug ins. Theyre great 5

david	27/08/2024
[0.15 lb] This piece (2) of equipment worked perfectly the first time I attached them and used them. They seem to be extremely well -constructed�and�were literally plug and play. I appreciated the nut that attached the power� to the unit to make it really secure. 5

Kyle	09/08/2024
[ABS Plastic] Deployed this product along with BH# INUSBWPCW at one of our sites on Monday. So far works great! 5

Woodrow	01/08/2024
[2.5 W] Used in a church sanctuary to send HDMI long distances and does it job. The green/orange/red indicator is very handy as well as the surface mounting hardware. 5