Intelix Usb-Wp-C-B Usb Wall Plate Extender

Intelix Usb-wp-c-b Usb Wall Plate Extender

Product Code: eq10075
Availability: In Stock

$105.00 $157.50

Qty

13 reviews Write a review

Description
Reviews (13)

The Intelix USB-WP-C-B Full Speed USB Twisted Pair Wall Plate Extender transmits low speed USB 1.0 and 2.0 signals up to 330.0' (100.5m) and full speed USB 1.0 and 2.0 signals up to 100.0' (30.4m) over twisted pair cabling. The Black Decora insert allows installation in any setting, facilitating a clean and low profile installation. The unit is plug-and-play and hence does not require additional driver software. The extender uses the same USB circuit as the AVO-USB and PMI-A9 for installation flexibility.

I/O Connections
USB	1 x Female USB Type A
Twisted Pair	1 x 8P8C port (Shielded RJ45)
Support
Maximum Distance	12 Mb/s: 100.0' (30.4 m), 1.5 Mb/s: 300.0' (91.4 m)
RJ45 Pin Configuration	Pin 1: Data + Pin 2: Data - Pins 3, 4, 5, and 6: GND Pins 7 and 8: 5V DC
Environmental
Enclosure	ABS Plastic
Operating Temperature	+32 to +104°F (0 to +40°C)
Operating Humidity	20 to 90%, Non-condensing
Storage Temperature	+14 to +140°F (-10 to +60°C)
Power
Maximum Power Consumption	2.5 W
Power	Via USB output of host device Vbus Power: 5 VDC
Extension	High Power Device Extension (< 500 mA draw): 30.0' (9.1 m) Low Power Device Extension (< 100 mA draw): 200' (60.9 m) Self Powered Device Extension (0 mA draw): 330' (100.5 m)
ESD Protection	Contact Discharge: 2 kV Air Discharge: 4 kV IEC61000-4-2 1995
Regulatory	CE, RoHS
Indicators	Power and Status LEDs
Dimensions	Housing: 1.57 x 1.18 x 0.87" (40.00 x 30.00 x 22.00 mm) Total: 1.65 x 4.06 x 1.43" (42 x 103.2 x 36.5 mm)
Packaging Info
Package Weight	0.2 lb
Box Dimensions (LxWxH)	4.8 x 3 x 1.7"

USB 2.0 full speed 12Mb/s, USB 1.1 legacy support

Up to 330' (100.5m) cable length on U/UTP category 5/5e/6

No external power required, uses host device's 5V power

USB A female (client) to RJ-45 jack connectivity

Black Decora insert with matching surround

Requires compatible host end

Uses any Cat5/5e/6/6A twisted pair cabling

Extension of USB 1.1 and 2.0 full speed signals

Plenum routing of USB 1.1 and 2.0 full speed

Suitable for education, government, house of worship, corporate, residential, and any other application requiring extended USB signal distribution

Related Questions and Answers

Q: 1. I am able to send USB signal from my M32r console to my mac book pro, running Logic Pro X... but I am not receiving any audio from the console to Logic. I've tried several different cat cables at different lengths, but still no luck. When I remove the transmitter and receiver from the equation, it works great. Any ideas as to why my computer recognizes the console while using the extender kit but will not pass any audio?

A: This would be heavily dependent on your specific situation the adapter itself is limited to USB Full Speed (12 Mbps): 100' (30.48 m) and USB Low Speed (1.5 Mbps): 330' (100.58 m). Your audio issue may be coming from the devices limited bandwidth.

Q: 2. All the photos show a cable, but the cable isn't listed as "in the box". Does it include a cable or not?

A: The Cable is actually attached to the wall charger. It is not removable. It will come with a 6 foot attached cord.

Q: 3. Does the USB-C input support video or is it charging and USB only?

A: The Comprehensive HDMI and USB Type-C Pigtail Wall Plate (White), BH # COWPDHDU3CAW, supports data transfer speed up to 5 Gb/s and is compatible with USB 2.0 devices.

Q: 4. Will this charger shut down when the charged device is fully charged, for both the A and C ports?

A: Yes, the ANKER 33W 2-Port USB-C/USB-A Wall Charger stops charging when the device is fully charged on both A and C ports.

Q: 5. Would this work well for a USB Z-Wave stick? Distance is around 50 feet.

A: Yes, the Full Speed USB Extender will work with the USB Z-Wave stick.

Q: 6. Can this be used with a USB hub? In particular, a USB 3 hub on the device end? I'm only expecting USB 2.0 speeds. A competing device only worked with some USB 3.0 hubs.

A: The IOGEAR USB 2.0 BoostLinq Ethernet Extender has to be connected directly to the computer. Now as far as using it with a USB hub on the device end, it may be possible. If you are planning to use it that way, then I recommend to get a USB hub with external power.

Q: 7. What is the max length of hdmi input cable for this aten ve806t?we tried using 5m hdmi but flickering happens

A: This unit can support up to 40m of cable for 1080p resolutions. If you're seeing flickering, we'd recommend slowly changing the EQ dial on the receiver side and see if a different number works better.ATEN Support

Q: 8. Are the dimensions the same as the apple charger?

A: The dimensions are nearly identical to the larger Apple adapter included with devices like the iPad, and original iPhone.

Q: 9. I am trying to send a usb signal from an m32 soundboard. will this be compatible with it?

A: Yes. But you will only get the rated distance stated on B&H for the protocol that your device uses so take that into consideration. Also there is an IC at each end if the cat6 so it will add a but of latency to the round trip

Q: 10. Is this sufficient for file transfer? Use case would be mounting external HD to NAS from across CAT6A tie lines. So I can back up NAS files without going to the basement or through the network.

A: It would not be recommended for data integrity. It is also going to be slow this is USB 2 speed.

Bruce E	28/09/2024
[4.8 x 3 x 1.7"] Two USB ports is nice. So is the fold down plug. Very happy with it. Works great with my Sandisk MP3 player. 5

Steve Berger Photographic	15/09/2024
[0.2 lb] Does the job. 5

Michael	26/08/2024
[ABS Plastic] This product works GREAT! This was a relatively short run (30') so Cat 5e worked just fine. Both devices powered from one end (Input TX) with this install. They were available, affordable and easy to install. The Power Supply is an inline DC supply, not a plug-in wall wart. This has been my go to HDMI extender kit. Kramer devices always work. 5

SASsy in Philly	23/08/2024
[ABS Plastic] If you don't purchase this, you will spend tons on batteries 5

Richard	14/08/2024
[0.2 lb] I spend a lot of time in Europe and I just needed a slim USB charger for my travel electric toothbrush. The toothbrush base has usb-a cable so the US Charger needed an adapter. This charger takes up less space and can be used to charge many different older devices. I tested it last weekend. Not only did it charge my toothbrush faster than my old US Charger; it can be used to charger some of my other older devices. 5

TJ	09/08/2024
[ABS Plastic] like the dual capability. reasonable cost. received promptly 5

DJ the dj	26/07/2024
[2.5 W] got two 8g SansaClips ... way convenient to have dual charging capabilities 5

Steven	25/07/2024
[0.2 lb] impressive 5

edgar	22/07/2024
[CE, RoHS] we bought these to relocate our presentation remote receiver close to the front of our church. we used a 100' cat6a cable, used a usb cable to connect from laptop to host, the a usb extension cable from client to remote receiver. Works perfectly. love that they are very compact, very easy to hide. 5