Shrinking their previous wireless systems down to even smaller components, the black Saramonic Blink 900 B2 true wireless microphone system gives content creators, run-and-gun videographers, and mobile journalists a pro-quality, all-inclusive solution for recording two subjects to your camera, camcorder, smartphone, or tablet.

The Blink 900 Pro B2 delivers considerably improved sound quality compared to the built-in mics on cameras and mobile devices, with advanced DSP technology to provide crystal clear sound quality with an extended operating range up to 656'. The components offer vivid color LCD screens that automatically adjust to your lighting environment. Plus, the receiver boasts separate line and headphone outputs to allow real-time audio monitoring without breaking the connection to your recording device.

The Blink 900 B2 digital system provides out-of-the-box operability for anyone; thanks to quick one-click pairing and internal 6-hour batteries, your focus can stay on your content instead of time-consuming configuration. Power the transmitters and receiver with their internal batteries or through USB for extra-long shoots. Recharging the batteries can be done via USB or by simply dropping the transmitters and receiver into the supplied fast-charging case.

Equally straightforward, small, and versatile, the Blink 900 B2 gives you everything necessary for recording present and clear speech in any location. You get two clip-on transmitters (each with a built-in microphone and a premium clip-on omni lavalier mic), a dual-channel receiver with an integrated clip and shoe mount, multiple charging and audio cables, foam and furry windscreens, and that special charging case. Whether you're a run-and-gun videographer, a YouTube content creator, or an avid vlogger, the Blink 900 B2 can get your wireless audio going pro in no time.

For Videographers, Journalists, Vloggers    2 Premium Omni Lavalier Microphones    2 Miniature Clip-On Mic/Transmitters    Miniature Dual-Channel Pro Receiver    Separate 3.5mm Main & Headphone Outputs    Easy to Use, Auto-Sensing LCD Screens    Mute Function, Mono/Stereo Output Mode    Internal 6-Hour Batteries, Charging Case    3.5mm Cables for Camera & Mobile Device    Up to 656' Range

• 2.4 GHz wireless transmission technology
• Compatible with cameras, mobile devices, and more
• Two clip-on transmitters with built-in omnidirectional microphones
• Dual-channel receiver with 3.5mm output
• High-resolution and easy-to-use LCD display
• Auto brightness adjustment & auto gain control
• Low-cut filter (160 / 120 / 80 Hz)
• 3.5mm headphone jack for real-time monitoring
• Built-in rechargeable battery provides up to 6-hour runtime
• Selectable mono and stereo output
• Operating range of up to 656'
• Includes 3.5mm, Lightning, and USB cables for audio and charging

Related Questions and Answers

Q: 1. will this fit on a dji mimo 3?

A: I think you might mean the DJI Mobile 3, the Mimo is their smartphone app. Yes, but you have to compensate to allow the extra space when mounting your phone.

Q: 2. Does it work with its old handhold microphone, hu9?

A: That, I do not know it's a great little system

Q: 3. In the manual, it states that "if the receiver reaches its safe battery level it will stop charging the transmitters". Huh?

A: Unfortunately, there was an error in the wording of the user manual for the Saramonic Blink Me 2-Person Clip-On Wireless Microphone System. Instead of stating "if the receiver reaches its safe battery level it will stop charging the transmitters," it should say "it will start charging the transmitters." Saramonic has been made aware of the error and apologizes for any confusion it has caused.

Q: 4. My Sony ZV1 has a hum in the audio when I use this system. Any suggestions on how to get rid of it?

A: Hum is almost always caused by a faulty ground or poor connection. Herea are several possible explanations/solutions for you to try: 1. It could just be a bad input cable. If the shield is broken internally, you'll experience hum. Try replacing the cable or test it on a different device. 2. You may be using the wrong input cable. The Blink 500 Pro B2 system has a LOT of cables, and there are two different ones that look very similar. The TRS cable has two narrow black bands on its metal tip while the TRRS one, which has three bands. Since the ZV1 uses an unbalance stereo input, be sure you are connecting the receiver to the camera using the TRS cable.

Q: 5. Can I purchase two different receivers for the same transmitter, one for iPhone, one for camera, not to be used concurrently?

A: Yes, the transmitters in the Saramonic Blink 500 B2 2-Person Digital Camera-Mount Wireless Omni Lavalier Microphone System can be used with different receivers in different scenarios, but not simultaneously. In the scenario described, the Saramonic Blink 500 RXDi Dual-Channel Digital Wireless Receiver for Lightning iOS Devices (BH #SABLNK500RXD) could be purchased for pairing to the Blink 500 transmitters when an iOS device is required instead of the camera.

Q: 6. Would it be possible to use two of these systems at the same time (a total of four TX and 2 RX)?

A: Yes, you can two of the Saramonic Blink 900 B2 2-Person Digital Camera-Mount Wireless Omni Lavalier Microphone Systems at the same time

Q: 7. Can a multiple systems be added for a total of four users or more?

A: The Saramonic Blink Me 2-Person Clip-On Wireless Microphone System with Touchscreens & Recording (B&H # SABLINKMEB2) will offer the best performance and reliability when no more than two systems (four users total) are used simultaneously in a closed space.

Q: 8. Is the camera mount compatible with the Nikon D 810?

A: Yes this system is compatible with a Nikon D 810 camera.

Q: 9. Can you set the frequency? I'm concerned if I have two sets of these, they might interfere with each other.

A: They set automatically. You can have up to 18 dual systems in a single area. Having two sets in an area will be without any issue. Just be sure to have the receivers at least 1-2 feet apart if possible for best results. If that is not an option try to have at least 6 inches between them.

Q: 10. Does this USB-C receiver also have a 3.5mm audio output?

A: No, this receiver is USB-C only.