Add an ideal lighting kit solution to your drone with the D10 Parrot ANAFI USA IR Drone Lighting System from FoxFury. Achieve optimum light placement with the three included 360° rotating D10 fixtures mounted on the featured USA saddle mount.

The D10 is a multifunction utility light that mounts onto most drones and helmets and offers 200 lumens in continuous high or strobe light modes. Meeting requirements set by the FAA for night flight operation, the D10 provides a 30° beam angle and two miles of visibility to incoming manned aircraft, with the IR model of the light offering infrared, in addition to white LED color temperature.

The rechargeable LiPo battery technology allows for 30 to 80 minutes of operation with recharging time never exceeding the one-hour mark. It can operate in light rainfall, allowing you to safely return your drone to its landing pad in the event of imminent, heavier rainfall. The compact design of these D10 fixtures makes them ideal for lighting areas with very tight spaces.

Meets FAA Night Flight Requirements    200 Lumens, White or Infrared LED Light    High and Strobe Modes    Includes ANAFI USA Mount    Rechargeable LiPo Battery    30- to 80-Minute Battery Life    1-Hour Recharge Time    30° Beam Angle

360° swivel lights

Strobe mode meets FAA and global regulations for UAV night flight and anti-collision lighting

Proudly made in the USA

Related Questions and Answers

Q: 1. Is there a designated place for the motion controller?

A: Yes. The Nanuk 925 Case for DJI FPV Drone System will have one slot for the DJI Motion Controller.

Q: 2. Can the Parrot ANAFI USA RGB take still photos? If so, can they be bracketed still photos?

A: Yes, the Parrot ANAFI USA RGB/Thermal Drone with Skycontroller 4 can capture stills, and they can be bracketed as well. The bracket options are 3, 5, and 7 photos.

Q: 3. Would it be safe to plug this into a Furman M-8x2 so that this unit could benefit from the M-8x2's power conditioning and surge protection?

A: Yes, it should be safe to connect a Furman D10-PFP to a Furman M-8x2.

Q: 4. Will this fit the Phatom 4 Pro V2?

A: Yes. The FoxFury Rugo R1S Drone LED Light System for DJI Phantom 4 & Phantom 4 Pro is meant for use with the Phantom 4 series.

Q: 5. Do you have an insert so you do not have to remove props?

A: Unfortunately no. We do not carry a case insert for the Nanuk 925 Case that provides protection to propellers.

Q: 6. How is the strobe mode triggered?

A: The FoxFury Rugo 2, 3-Point Lighting Kit only offers a strobe mode for drone search and rescue which is FAA compliant 107.29.

Q: 7. Share HAC zone classification certificate for use in refinery.

A: Pelican has provided a safety specs sheet on their website here. Product page: https://bit.ly/36Q9Kq7 Safety data sheet: https://bit.ly/3glTP62 For more safety information, it would be best to confirm specifications with the manufacturer as these may have changed since publication. https://www.pelican.com/us/en/support/contact-us/

Q: 8. carging port is C or old style micro usb?

A: The charging cable for the FoxFury Rugo RC Light for Drones and Cameras is a Micro USB to USB-A cable.

Q: 9. What is the resolution of the RGB camera for still photos?

A: The Parrot ANAFI USA RGB camera has a resolution of 320x256.

Q: 10. What is the 35mm equivalent of the wide and telephoto cameras?

A: The Parrot ANAFI USA RGB/Thermal Drone with Skycontroller 4's wide angle lens is a is a 26mm equivalent, and 832mm when fully zoomed into the telephoto lens.