D-Tap To Red Komodo Power Cable (13-19")

D-tap To Red Komodo Power Cable (13-19") - Digitalfoto

Product Code: eq101599
Availability: In Stock

$82.62 $112.36

Qty

18 reviews Write a review

Description
Reviews (18)

The Coiled D-Tap to RED KOMODO Camera Power Cable from DigitalFoto Solutions Limited provides power to the RED KOMODO from a Gold or V-mount battery. It has a right-angle D-Tap connector on one end, which connects to the battery, and a right-angle 2-pin LEMO on the other for camera connectivity. This coiled cable extends in length from 13 to 19".

For RED KOMODO Camera Right-Angle D-Tap to Battery Connection Right-Angle 2-Pin LEMO to Camera Coiled Cable 13 to 19" Long

Parameters
Connector 1	1x 2-Pin D-Tap Male (Right-Angle)
Connector 2	1x 2-Pin LEMO Male
LED Indicators	No
Cable Length	13.7 to 19.7" / 34.8 to 50 cm
Packaging Info
Package Weight	0.135 lb
Box Dimensions (LxWxH)	6.95 x 4.75 x 1.2"

Related Questions and Answers

Q: 1. Will this work on my Red Raven (which has a DSMC2 V-Lock I/O Expander)?

A: The manufacturer defines one of these connectors as "proprietary" thus we recommend using a cable that has been tested and approved for the Raven with I/O expander: https://bhpho.to/2IoMjuX

Q: 2. Regulated?

A: The Wooden Camera D-Tap to RED KOMODO (36", Inward Right Angle) has no voltage regulator.

Q: 3. The C200 MK II has not been announced yet. Is this for the C300 mk II? Or maybe the C200 mkI?

A: Yes this is for the C300 MK II

Q: 4. Is this compatible with other cameras such as the c100 mk ii?

A: Yes. The following battery adapts to anything that accepts a BP-955 Battery.

Q: 5. Will the inward facing right angle connector block access/use of the Komodo SDI port?

A: The Wooden Camera D-Tap to RED KOMODO (36", Inward Right Angle) will not block the 12G-SDI port on the RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (Canon RF).

Q: 6. Why was this removed from RED's list of Approved Accessories?

A: A reason has not been relayed why RED has removed the Tilta Advanced Power Distribution Module for RED KOMODO (Black) from the RED list of approved accessories.

Q: 7. What is the cable length? I don't see that information anywhere.

A: The DigitalFoto Solution Limited D-Tap to 2-Pin Power Cable for BMPCC 6K/4K (Straight) is 2Ft in length.

Q: 8. Can the second ext port act as a passthough port to connect the control cable from a SmallHD Cine 7?

A: Yes, The second EXT port of the DigitalFoto Solution Limited 9-Pin B-Box for RED KOMODO will act as a pass-through port allowing control from a SmallHD Cine 7 display.

Q: 9. Will this work for Komodo-X?

A: No, the Wooden Camera D-Tap to RED KOMODO (36", Inward Right Angle) will not support the RED Komodo-X camera. An alternate model that will support the RED Komodo-X is listed below. The RED Komodo works with 2-Pin power connections, and the DSMC2/DSMC3 cameras are 6 pin lemo. Kondor Blue D-Tap to LEMO 6-Pin Cable for RED RAPTOR DSMC2/DSMC3 & KOMODO X (20") BH #KOBDTFLEM6PB Wooden Camera D-Tap Braided Flexible Power Cable to RED DSMC1/DSMC2 (36") BH #WO208800RA

Q: 10. What are the two proprietary cable ends listed? The input is a 2-pin. Does the other end need a 2-pin lemo (f) output from a battery source?

A: The Wooden Camera Extension Power Cable for RED KOMODO has a 2 pin lemo connector on each end. One to connect to the camera and the other to your power source like the Komodo power supply https://bhpho.to/3CHVrlW

Carlos	24/09/2024
[0.135 lb] Using it to power my komodo mounted on a cinema robot. enough length for that. 5

Steven	29/08/2024
[0.135 lb] I use this cable (Tentacle to RED KOMODO, SKU: C21) with my Sync E and Komodo, which shows proper configuration with a small green "TC" indicator on its screen. This cable is thin without being fragile or flimsy. The cable sleeve is high quality and reinforced with a thicker and sufficiently long secondary jacket on the LEMO (male) end to protect against the flexing at that high stress part of the cable. On the mini-jack end of the cable, the 90 TRS (male) connector is also very high quality. Perfect (40 cm/ 16 in) length for my use: with the Lanparte bracket for the Sync E affixed to the left side of the cage I use on my camera. Right side or top placement instead would work as well. I have attached a few photos. Recommended! 5

Jonathan	21/08/2024
[0.135 lb] Works perfectly with no problem. 5

Michael	06/08/2024
[0.135 lb] seems a little flimsy at Dtap connection but have had no issues with it. 5

Jordan	08/07/2024
[0.135 lb] I use this cable in order to distribute weight more evenly to achieve a properly balanced RS2. Works as stated. The 36" length allows further flexibility for various rigging arrangements if you want to rig the battery farther from the camera. 5

Vizual	04/07/2024
[0.135 lb] Works fine. I use it for steadicam when I need to power the camera from my rig. it's also nice to get the battery away from the camera for car mounting and other use cases where weight is a factor. 5

Carey	23/06/2024
[0.135 lb] I purchased this for the (ext)9pin input on the RED Komoto. Directly to a Tentacle. Worked perfectly. 5

Lars	09/06/2024
[0.135 lb] When given the choice in the field, I'll always prefer power off of a brick than a smaller battery for my Atomos recorders and these cost-effective D-tap cables do the trick. Peace of mind is pricelesss. 5

Andre	09/06/2024
[0.135 lb] I've been using it to connect my Komodo to a V-Mount battery on a Ronin RS2 Ring. I didn't have any issues so far. Length-wise also works very well, with some extra cable in case I want to do more extreme movements with the camera. 5

Zach	26/05/2024
[0.135 lb] Bought this in a pinch to jam timecode for an interview with my new RED Raptor. It worked perfectly. Cable is also of very nice quality. 5