The large HoldFast Gear MoneyMaker 3-Camera Harness Black Largefrom HoldFast Gear MoneyMaker 3-Camera Harness Black Largeis made from U.S. native steer hides, with anchored stainless steel D-rings, rust-resistant hardware, and safety straps for ultimate security. These features plus its versatile design make it an essential tool for the modern photographer.

The bottom side has a suede-like feel and will shed a little at first use. This stops very quickly, and you can run your hand along the length of the strap to remove any loose shavings. The bottom side is also colorless so it won't bleed onto your clothing.

HoldFast Gear uses real full grain leathers. As such, each hide will display the unique life that the animal lived and your harness straps may exhibit scars from brands, barbed-wire cuts, stretch marks, insect bites, marks from birthing, and natural creases.

Made from U.S. Native Steer Hides    Securely Holds 1-3 Cameras    Stainless Steel D-Rings & Hardware    Hardware is Rust Resistant    Holds Other Gear/Accessories

Fit is based on height and broadness. The ideal carrying position of the MoneyMaker is for the strap to fall about 4-5" below the armpit so the cameras stay high on your body.

Small: Height of 5'7" and below; if you are broad/built, size up

Medium: Height between 5'8"-6'2"; if you are slender, size down, broad or built, size up

Large: Height of 6'3" and above OR wear extra-large clothing; if you are slender, size down

Optimum fit will ensure the most comfort long term. If the MoneyMaker is worn too loose it causes the cameras to swing and sway too much, which puts pressure on your lower back and the straps tend to move and slip more. When worn properly, the MoneyMaker will be anchored to the body and actually help correct poor shooting posture by pulling your shoulders upright and back, keeping you and your cameras in line. So when the main straps are around 4" below the arm pit area, this will place the clip that attaches to the camera right around your waist line. There should be a good amount of arm bend when your hand is on the camera at resting position.

Related Questions and Answers

Q: 1. How well does the HoldFast Gear Money Maker "Two" Camera Harness do when holding only one camera? Does this harness require always carrying both cameras for proper balance or can you also use it comfortably with only one camera attached?

A: The Holdfast double harness manufacturer says it will work with one camera as well as two. The weight of the single camera is a factor.

Q: 2. I don't know which size to choose. Thinking about S or M I am 175cm tall and weigh 68kg. Do you have the recommended size??

A: I would recommend the small given your size and weight.

Q: 3. Does it come with the camera plates or rings, or do those need to be purchased separately?

A: It comes with 2 Holdfast Accessory Clips to hold cameras.

Q: 4. Since there are no buckles at chest level, do the shoulder straps have a tendency of slipping off your shoulders?

A: It does not slide off your shoulders. It should fit well and hold your camera gear.

Q: 5. I am 6'2.5 inches tall using two Sony A7 camera's. One will carry the 24- 70 mm the other a 85mm Batis or a 50mm 1.1 Voightlander. y camera's are heavy with these lenses, and I need a secure attachment for crowds in foriegn locations on shoots. ( no snatch and go ). How would the Portrait Extensions work? Will the Large work with my camera's and my height ? I am medium build.

A: The large would be just fine for you. I'm 6 4 and with my Canon 5DIII and the 70-200 it comes to my waist line. Their are straps to adjust for height if it's to long.

Q: 6. Can this harness be ordered with no D-rings?

A: I'm sorry, no, you would either have to cut them off or try and order direct from Holdfast.

Q: 7. Does the included Two 1/4"-20 HoldFast Accessory Clips work for attaching the quick release plates of most cameras for tripod mounting or do I have to order the HoldFast Gear's The Camera Holdfast Accessory Clip (Quick Release Plate Compatible) B&H # HOCHF02QRP MFR # CHF02-QRP for the price of $33.99 each for two cameras for a two-camera harness?

A: You will need to purchase the quick release clips separately as they do not come with the harness.

Q: 8. Is there a size chart? What sizes are medium and large?

A: According to the manufacturer, the ideal carrying position of the MoneyMaker is for the strap to fall about 4 below the armpit so the camera rest higher on the body. A small sized harness would be for an individual at a height of 5 7 and below. A medium sized harness would be for an individual at a height of 5 8- 6 2. Lastly, a large sized harness would be for an individual at height of 6 3 and above or if they wear extra large clothes. They also state that if your size falls into one of these ranges but youre really built or broad shouldered, then you should go a size up. Otherwise, if you are tall and slender, then you can size down.

Q: 9. Hello I have a question it si possible to remove the straps an from of the harness money maker 3 gear?

A: It is not possible to dissemble these straps. This adds to your piece mind knowing it will not fall apart on you.

Q: 10. Can the chest strap be removed? Can it be use as a 2 camera setup for times when I dont need 3

A: None of the straps are removable on this harness. You might consider using Velcro or rubber bands to hold the unused straps in place. Pearstone 0.5 x 6 Touch Fastener Straps (Black, 10-Pack) B&H # PES050610B