Mount your ALEXA 35 onto a MōVI Pro or MōVI M15 stabilizer using this ARRI Stabilizer Adapter Mount SAM-5. The mount is a low-profile dovetail plate that facilitates mounting the camera onto the stabilizer.

Low-Profile Dovetail Plate    Connect ALEXA 35 to Stabilizer    For MōVI Pro/MōVI M15

ARRI ALEXA 35 cinema camera
FREEFLY MōVI Pro or MōVI M15 stabilizer

Related Questions and Answers

Q: 1. Can I connect a line directly through a mixer or a sennheiser receiver?

A: Hi Tatiana. Yes, to record editing-quality sound, you can connect a mixer or Sennheiser receiver to one of the 3pin XLRs of the A-Box to then send a line level to the camera.

Q: 2. Will this work if you don't have the tilta cage? Can you plug this into the Arri Alexa mini 7 Pin ext port then go to the motor?

A: Yes, you can plug the Tilta Nucleus-M Run/Stop Cable for ARRI ALEXA Mini with Tilta Cage (B&H# TIRS02AM) into the Tilta Nucleus-M Wireless Lens Control System (B&H# TINUCLEUSM) and the LEMO 7-pin EXT port on the back of the ARRI ALEXA Mini Body with Pre-Installed Licenses for full 4:3, MXF/ARRIRAW, & Open Gate Functionality (B&H# ARK0.0010045).

Q: 3. Will either channel 1 or 2 record audio in stereo? or channel 1 = left channel only, and channel 2 = right channel only in mono?

A: Hi James. The A-box sends two independent channels. It is up the the setting in the camera how these are used, so check your settings, but it is wired as two independent tracks.

Q: 4. Do you need any special attenuator cables to make it work with the Canon R5C or will a 5-pin XLR to 3.5mm work?

A: You could use an XLR 5-pin female to 3.5mm TRS male cable like the Wooden Camera Single 3.5mm TRS to 5-Pin Female XLR - 18" (B&H # WO808010) to send line level audio from the Beachtek DXA-ALEXA Low-Noise Preamplifier to the Canon EOS R5 C Mirrorless Cinema Camera. As another option, you can use the 3.5mm mic output on the DXA-ALEXA to send mic level audio to the camera's 3.5mm TRS input.

Q: 5. Do the batteries or the battery plate have d-tap?

A: The Core SWX Helix Max 147Wh Lithium-Ion Dual-Voltage Battery (Gold Mount) in the Core SWX 4 x Helix Max 147Wh Batteries & ARRI ALEXA 35 Battery Plate Kit (Gold Mount) offers a D-Tap port.

Q: 6. What’s the weight?

A: The ARRI Touchdown Baseplate TBP-1 for ALEXA 35 is 1.21lb or 549g.

Q: 7. How do you monitor the signal on a Canon R5C with this unit?

A: In order to monitor audio through the Beachtek DXA-ALEXA Low-Noise Preamplifier, you will need to connect the camera's 3.5mm headphone output to the 3.5mm return jack (labeled "RTN" on the DXA-ALEXA, which is next to the unit's headphone jack (labeled "PHONES"), and then connect your headphones directly to the DXA-ALEXA.

Q: 8. What is the bottom dove tail standard? Is there any mounts?

A: The ARRI Stabilizer Adapter Mount SAM-6 (18") for ALEXA 35 is made to the ARRI dovetail/baseplate standard.

Q: 9. Does the bottom part the standard arri dovetail size? and can it be attached to Oconnor heads straight?

A: The bottom rail is OConnor standard so yes you can slip it in. The upper rails are Arri standard. On the bottom are 3/8" threads for other mounting solutions.

Q: 10. Can I drop this straight to OConnor 2560 without euro plate?

A: Unfortunately, the ARRI Stabilizer Adapter Mount SAM-8 for ALEXA 35 is not listed to drop straight into the OConnor Ultimate 2560 Fluid Head. It can be possible to adapt the ARRI Stabilizer Adapter Mount SAM-8 for ALEXA 35 to the ARI Dovetail Utility Base Dub-2 (when released), which can mount to large Touch and Go Euro plate receivers like the OConnor Euro-Style Quick Release Platform with Touch & Go Plate.