Right-Angle To Straight 16-Pin Lemo Cable For Red Monitor

Right-angle To Straight 16-pin Lemo Cable For Red Monitor

Product Code: eq101801
Availability: In Stock

$260.31 $325.39

Qty

12 reviews Write a review

Description
Reviews (12)

Connect your RED camera to a RED LCD monitor with this 23.6" Right-Angle to Straight 16-Pin LEMO Cable from DigitalFoto Solution Limited. The cable features a right-angle 16-pin LEMO connector at one end and a straight 16-pin LEMO on the other.

Works with RED LCD Monitor 16-Pin LEMO Connector on Each End

Parameters
Connector 1	1x LEMO 16-Pin Male Right Angle
Connector 2	1x LEMO 16-Pin Male
Cable Length	23.6" / 60 cm
Packaging Info
Package Weight	0.185 lb
Box Dimensions (LxWxH)	6.9 x 4.65 x 0.8"

Related Questions and Answers

Q: 1. Is this USB 2.0 or 3.0? Thanks in advance!

A: This is a USB 3 cable.

Q: 2. will this cable allow me to send audio to iPhone with the original wireless go? is the usb-c port on the original go an audio out?

A: Yes, the Rode SC16 Straight USB Type-C to Right-Angle USB Type-C Cable will allow you to transmit audio from a Wireless Go system, which uses USBC for audio output.

Q: 3. Will this power an atomos ninja 7?

A: No this will not work with the Atomos Ninja Inferno 7. The right cable will be this: BH #INDTATM1

Q: 4. Will this power a Canon R5c from a gold mount battery?

A: No, This Kondor Blue Straight D-Tap to DC 2.5mm Right-Angle Cable (15") will not support powering the R5C.

Q: 5. can this cable be used to send audio to the Alexa? or is it strictly timecode?

A: The Deity Microphones C13 Right-Angle Locking 3.5mm TRS to Right-Angle 5-Pin LEMO Timecode Cable for Arri Alexa Mini is intended for use with a Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80) which has a locking 3.5mm TRS output connector. The cable can also be used to send audio signal from other devices that have a locking 3.5mm TRS output connector, like a wireless microphone receiver.

Q: 6. Can this cable be used to power the canon xf405 straight from vmount battery? (IndiPRO Micro-Series 98Wh)?

A: The Kondor Blue Straight D-Tap to DC 2.5mm Right-Angle Cable (15") is meant for the Canon C70. That camera has a voltage input range of (11.5 to 20 VDC). The XF405 is listed by Canon as having a power range of. 7.4V DC (Battery Pack) to 8.4V DC (DC IN) Since this cable is unregulated, using it with 14.4 volt battery on a camera that takes only 8.4VDC, you would have an overvoltage situation, something you do not want to have.

Q: 7. I’m using a mid49 breakout box on Komodo x, is this compatible for timecode?

A: The Deity Microphones C14 Right-Angle Locking 3.5mm TRS to Straight 5-Pin LEMO Timecode Cable for Various Devices is compatible with standard 5-pin LEMO timecode inputs. Specific compatibility for the Komodo X breakout box is not mentioned, but most devices with a 5-pin LEMO timecode input should be compatible.

Q: 8. Can i use this with XF605?

A: No, the Kondor Blue Straight D-Tap to DC 2.5mm Right-Angle Cable (Kondor Blue,15") would not be compatible with the Canon XF605 UHD 4K HDR Pro Camcorder. A suitable way to power the camera via D-Tap would be the GyroVu D-Tap to Canon BP-A30 Dummy Battery Cable (30"), BH #GYGVDTAPA30.

Q: 9. Is this compatible with the ninja V?

A: The Kondor Blue Straight D-Tap to DC 2.5mm Right-Angle Cable (15") BH #KOBDCTPRA15S is compatible with the Atomos Ninja V 5" 4K HDMI Recording Monitor BH #ATNINJAV. But this is not a locking DC cable. Best to use the: Atomos D-Tap to DC Barrel Coiled Cable - B&H # ATOMDTPCB2

Q: 10. will this work for the red komodo-X ?

A: No, the Deity Microphones C14 Right-Angle Locking 3.5mm TRS to Straight 5-Pin LEMO Timecode Cable is not compatible for use with the RED KOMODO-X 6K Digital Cinema Camera. The KOMODO-X uses a 9-pin connector for timecode, so you can use the Deity Microphones C17 Right-Angle Locking 3.5mm TRS to Right-Angle 9-Pin LEMO Timecode Cable (B&H # DEDTS0308D61).

Scott	09/09/2024
[0.185 lb] Always good to have a coil cable in the bag! 5

Andre	03/09/2024
[0.185 lb] I've been using it to connect my Komodo to a V-Mount battery on a Ronin RS2 Ring. I didn't have any issues so far. Length-wise also works very well, with some extra cable in case I want to do more extreme movements with the camera. 5

Paul	15/08/2024
[0.185 lb] I use this to send timecode from Tentacle to Red Komodo, via Mutiny I/O. 5

Vizual	16/07/2024
[0.185 lb] Works fine. I use it for steadicam when I need to power the camera from my rig. it's also nice to get the battery away from the camera for car mounting and other use cases where weight is a factor. 5

William	05/07/2024
[0.185 lb] Every product I've ever purchased from Tentacle Sync is of outstanding quality, and this cable is no exception. I still use a Red One, and this is the cable you need to connect a TS timecode generator to the camera's timecode input. 5

Bob	05/07/2024
[0.185 lb] If you need a cable for a Red camera this is the one. There are different Red camera's so make sure you know what pin configuration you need 5

Kong	02/07/2024
[0.185 lb] Tentacle Sync cables are always great and as the headline says, this is the cable for use with the RED Mysterium X camera. If that's the camera you're dealing with, don't use the cable that says it's for RED, that connector looks the same but is smaller. I'm sure it's for the newer RED camera systems. 5

Emanuele	07/06/2024
[0.185 lb] Perfect solution for my Komodo set up. 5

ed david	09/05/2024
[0.185 lb] that right angle and build quality is wonderful. A lot of lemo cables fail on me, but this guy is solid. 5

Werner	07/05/2024
[0.185 lb] Cable works well with Deity TC-1 and Red Dragon DSMC-1. Replaces a $40 generic cable from Bezos company that didn't lock and also only worked intermittently. Downside is of course the $75 price of this cable. 5