With two spot beam brightness levels and white, red, and green flood beams, the Nightstick NSP-4610C LED Headlamp with Camo Headbandfrom Nightstick NSP-4610C LED Headlamp with Camo Headbandcovers a wide range of hands-free lighting needs. The focused 110- and 210-lumen spot beam illuminates at a distance while the flood beams provide generous close-range lighting. The red and green colors can help preserve night-adjusted vision. A nonslip elastic head strap keeps the light snugly and comfortably in place, and the ratchet-tilting head allows the beam to be placed right where it's needed. The camouflage elastic headband and flat dark earth coloring make the NSP-4610C suitable for use when hunting or shooting wildlife photography. The NSP-4610C is waterproof and tested to withstand being dropped from 6.6'. The runtime on a fresh set of three AAA batteries is 4.5 to 8.5 hours on spot and 4.5 to 25 hours on flood beam.

110/210 Lumen Spot Beam    White, Red, Green Flood Beams    Ratchet Tilt Head    Dual Push-Button Switches    Flat Dark Earth Tone Polymer Housing    Camouflaged Elastic Headband    IPX7-Rated Waterproof    Nonslip Elastic Head Strap    Includes 3 x AAA Alkaline Batteries

• White spot beam: 110/210 lumens
• Flood beam: red 10 lumens, green 12 lumens, white 135 lumens
• Runtime: spot beam, 4.5/8.5 hours; flood beam: 4.5/25/25 hours

The camouflage elastic headband and flat dark earth coloring make the NSP-4610C suitable for hunting or shooting wildlife photography.

• Dual push-button switches

• Engineered polymer housing
• Ratchet tilting head
• Nonslip elastic head strap
• IPX7-rated waterproof
• impact resistant to 6.6'
• Runs on three AAA alkaline batteries (included)

Related Questions and Answers

Q: 1. does it come with the batteries?

A: Unfortunately, the 18560 type battery for this headlamp is not included. You would need the Nitecore 18650 Li-Ion Rechargeable Battery (3.7V, 3400mAh) B&H # NINL1834 & the Nitecore UM10 Battery Charging System B&H # NIUM10 https://bhpho.to/2ldTedC https://bhpho.to/2SEKARL

Q: 2. Will the Wimberley wh200 head that all ready has a lenscoat wrap on it fit in this pouch?

A: Yes the Gimbal with the lens coat wrap will fit inside the pouch easily.

Q: 3. Will a 5x7 view camera that is 10 1/2 x 9 1/2 x 5 1/2 fit in the interior? Also will 5x7 film holders fit in the front?

A: Yes, the Domke Photo Backpack (Brown) will fit a view camera with those dimensions, including the film holders in the front pocket. The depth of the camera (5 1/2") is a bit tight, but it will fit.

Q: 4. Are the dividers in this camera backpack removable?

A: Yes, the dividers are removable and you can re arrange them inside Hex Cinema Backpacks.

Q: 5. Will this fit a ProMediaGear Full Will this fit the ProMediaGear Will this fit the 13" high, Full Will this fit a ProMediaGear Full Will this fit the ProMediaGear Will this fit the 13" high, Full Size ProMediaGear-Katana Gimbal? Thank you, Steve

A: most likely not because the promedia is about 14" tall and the wimberley is about 10"

Q: 6. Would this fit under a coach International airplane seat?

A: The Domke Everyday Photo Backpack has exterior dimensions of 19x9x13 inches for a total of 41 linear inches. Most airlines have a maximum linear size up to 45 inches. But check with the carrier to be sure because each airline can have slightly different rules.

Q: 7. Will a Fuji XF 150-600mm zoom fit without a camera attached?

A: The Domke Photo Backpack (Brown) is large enough for the FUJIFILM XF 150-600mm f/5.6-8 R LM OIS WR Lens, but not much else will fit.

Q: 8. Will this cover fit the Movo GH800 Gimbal Head?

A: yes it will

Q: 9. will this cover Benro GH5C Carbon Fiber Gimbal Head with PL100LW Plate?

A: Yes, the LensCoat Gimbal Pouch (Black), BH #LELCGPBK will accommodate the Benro GH5C Carbon Fiber Gimbal Head with PL100LW Plate, BH #BEGH5C.

Q: 10. Will this fit the older model HD 280? Mine are from around 2005. Tried new band for new model from Sweetwater and1/4-3/8 gap-no amount of stretching will get it to close as the old one did.

A: It should fit on older HD 280 model headphones. Some customers have mentioned that it did require a bit of pulling and stretching to attach, and it's important to make sure the grooves are aligned on both sides so you can press them together, like sealing a ziplock bag. Here is a video from Sennheiser that shows how to replace the padding:: http://www.youtube.com/watch?v=nUy6bg8MILs