The Elation Prisma Mini Bar 20 Professional Lightingis an IP65-rated exterior UV wash bar luminaire that produces 365nm peak true UV output with zero visible light, plus an impressive 20-degree beam angle. Powered by the optional Prisma Driver 8 or Prisma Driver 8IP, it features two adjustable mounting brackets, a durable aluminum housing, and a 9' 2-conductor, 14 AWG IP-rated power/data pigtail cable.

365nm True UV Peak Wavelength    20° Narrow Beam Angle    Zero Visible Light Output

• IP65-rated exterior high-power UV wash bar luminaire
• 20-degree narrow beam angle
• 365nm True UV peak wavelength
• Zero visible light output
• IP-rated power/data pigtail cable attached

• 10 3W high-power UV diode LEDs
• 20,000-hour average LED life

Related Questions and Answers

Q: 1. The photos of this product show two different versions. Does this have a 5-pin or a 3-pin DMX connection?

A: The Elation Professional UNI BAR Single DMX Channel Pack ships with a 5-pin DMX in and out connection.

Q: 2. Will this work with wireless dmx modules? They tend to have 1 transmitter and multiple receivers.

A: The SDC12 can work with wireless DMX modules.

Q: 3. Im new to DMX controllers. How does this control multiple lights with only one or two outputs?

A: The idea with DMX512 is to have one cable run (from controller into first light and out from 1st light into second light and out of second into 3rd etc. So that would explain the single output. The SDC12 is used for very basic either testing of units or simple manual control over the fixtures via the faders essentially sending a signal to lights from0-100% activating the features of the light being controlled. If used with an RGB color mixing pars in 3 channel mode fader one for example would dim the R or red channel from 0-100% the second fader would control Green and third control Blue allowing you to mix these colors producing different colors mixing the colors at different levels. For a programmable controller you may want to look at the ADJ DMX Operator. I hope this helps?

Q: 4. Is this fluid non-toxic?

A: According to the manufacturer MSDS it present any particular risk.

Q: 5. Can I use 2 of these units to wireless remote control motorized Bescor MP-101 motorized pan/tilt head?

A: According to the MFR these will only work with E-FLY and WI-FLY compatible devices.

Q: 6. Is this unit capable of properly dimming LED bulbs?

A: The Elation Professional CyberPak Dimmer Power Pack (B&H# ELCYBERPACK) is capable of dimming dimmable LED lamps (also known as bulbs) properly. The first person to answer this question mentioned LED dummies (i.e. adding a small load on the circuit to drain the capacitors/transformers) and also that the LEDs won't flicker when off, suggesting that they could flicker when on. To clarify, since LED dummies would only be needed if your LEDs aren't going completely black as quickly as you want when you dim to zero or shut off the circuit. If you are experiencing trouble with LED flicker then you will want to use them at full power or invest in LEDs that can handle this type of dimmer or switch to an LED dimmer.

Q: 7. New to DMX and their related equipment. The specs for the Elation says it has 1 master dimmer fader and 6 faders. I have 5 LED panels and I want to control each one separately for brightness and color temp. I believe that means I need 10 faders - right? Does that mean I would need two Elation Controllers? Is there another simple/basic option that would allow me to support all of my LED panels via one DMX controller? I don't need fancy programming or preset options.

A: No. The following unit offers six faders which control channels 1-6 and 7-12.

Q: 8. I this compatible with LED loads? (No flicker?)

A: Yes

Q: 9. I have tested with just the only dmx light I have--it works but ony using the #1 slider--can't seem to assign the light to another slider. I'll be getting more dmx lights, so how can I assign lights to the other sliders? (If adjust the light itself to channel 2, I can still only control it with the #1 slider, and I didn't have any luck messing with the dip switches on the controller--I didn't fully understand their explanation of the switches.)

A: If you set the light's DMX address to one more than the address of the controller then it'll be able to be dimmed with slider #2. Set the light to two more than the address of the controller and you can use slider #3 to adjust it, and so on.

Q: 10. If I turn off this console, will the connected lights turn off as well?

A: depending on the fixtures and if they have a look store or a when dmx is lost feature, i use them all the time its a great console