The RemoteMix 2 Broadcast Field Mixer from JK Audio is a two-channel field mixer/headphone amplifier designed for use in remote broadcast environments.

This mixer provides a communications interface for remote broadcast, IFB, or a backup audio path. The integrated headphone amplifier provides sidetone to monitor all inputs as well as an external feed. It also features a phone line hybrid with keypad along with a wired notebook/cell phone headset interface. These parts are designed to work together, saving setup time and wiring in the field. For TV, a phone line for real-time production monitoring can be used. This unit combines a small front-end mixer with two powerful 1/4” headphone outputs. It allows you to send and receive interview audio while pulling IFB off the phone line, cell phone, or notebook.

The RemoteMix 2 is suitable for use with live broadcast remotes. You can use it as a front-end mixer for your POTS, ISDN, IP, or smartphone codec. Additionally, you can use it as a phone line hybrid, calling into your studio talk show hybrid.

2 x Microphone Inputs    2 x Headphone Jacks    Phone Line Hybrid with Keypad    Wireless Phone Interface    HD Voice (Wide-Band Speech)    Universal PBX Handset Interface    LED VU Meter

Two XLR mic jacks

Mic/Line pad on the two channels

Two 1/4" headphone jacks with individual level controls

3.5mm send and receive jacks

LED VU meter

Phone line hybrid with DTMF keypad with redial

Wired phone headset interface (2.5mm and 3.5mm)

Dual 9V batteries

100 to 240 VAC external AC power supply

Related Questions and Answers

Q: 1. How do you adjust the audio on this equipment? We are running through a sound board.

A: Page 02 of the following data sheet shows how you would interface the AutoHybrid between your land line phone and your audio console. https://www.jkaudio.com/downloads/datasheets/JK-Audio-AutoHybrid-Datasheet.pdf

Q: 2. Does this work with VOIP? Or only POTS lines?

A: I've actually used this with an NEC DT700 which is a VOiP phone with a standard style handset. It worked pretty well. I would imagine that it works with any phone that has a standard RJ-11 handset connector.

Q: 3. I am trying this device with an Olympus digital recorder, connected via RCA cable. How do I reduce static noise? It seems that the noise level is amplified when connected. Not sure if the issue is THAT-2 or my battery-powered digital recorder...

A: I have not yet put into use this device

Q: 4. Do you have this in a longer cord? Or is there an extension cord that could be used with this?

A: There are several extension cords which will do this. I recommend using a 1/4 TRS cable such as the ones found at https://a href= http://www.bhphotovideo.com/c/search?Ntt=1%2F4%22%20TRS%20extension%20cable&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search= target= _blank www.bhphotovideo.com/c/search?Ntt=1%2F4%22%20TRS%20extension%20cable&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search=/a .

Q: 5. can i use this rig with an Apple iPhone XS to then connect a phone call through a mixing board for an audio podcast?

A: The JK Audio AutoHybrid is a telephone audio interface, specifically for an old-fashioned landline, and will not work with a smartphone. I would recommend the JK Audio Daptor Three Bluetooth Cell Phone Audio Interface, B&H # JKDAP3, which can be connected to your iPhone through a 3,5mm cable or Bluetooth wireless, and can be inputted into your mixer. There is also a LINE IN on the unit, so you can send the signal back to the caller. You would require a mixer with and AUX Out feature.

Q: 6. I would like to use this device to make engineering test measurements of signals on the POTS phone line (noise, distortion, frequency response, etc.). Are the audio signal levels on the XLR connectors the same as one would measure on the POTS line (w/o the DC of course)? And can both directions of two-way conversation be measured with this device?

A: This information is not documented. Please contact JK Audio directly to speak to one of their support engineers:JK AudioTel: 800-552-8346Email: info@jkaudio.comWebsite: http://www.jkaudio.com/

Q: 7. I would like to know if this unit does its own mix minus. I intend to use it with a sound device 302 so no auxiliary sends are available.thanks

A: The JK Audio Auto Hybrid is a basic passive telephone interface. It features a line level input and output on XLR. It will need to be sent a mix-minus signal as there is no control on the unit itself.

Q: 8. I have a multi line LG Ipecs phone system and want an interface for radio interviews. Is this the unit that will do it?

A: This JK system is designed for analog phones and cannot be used with IP phones such as your LG Ipecs system. This may work for you, but it is strongly suggested that uyou verify compatibility with Ipecs support prior to purchasing: https://a href= http://www.ipecs.com/ target= _blank www.ipecs.com//a --------------------------------------------------- JK Audio AutoHybrid IP2 VoIP Hybrid/AoIP Codec B&H # JKAUTOIP2

Q: 9. I am experience a clicking noise when I feed an audio signal through the THAT2 unit. Any recommendations on how to resolve that noise? or suggestion on different equipment.

A: Clicking is often from telephone line. Try using the line input, as a test to see if its clean, then you know its the phone line.

Q: 10. does this item work with a 70 volt amplifier?

A: The AutoHybrid is a passive telephone audio interface, allowing a telephone signal to be brought into a mixing board as an audio signal, and then separating the caller and sender of the call. Typical use is radio call-in shows, podcasts and conferences.