Radio stations in search of a professional grade digital broadcast mixer will be impressed with the Axel Technology Oxygen 1000 BT, a fully digital broadcast console with Bluetooth that's designed for on-air and production work. The mixer features 6 compact faders, three microphone inputs with auto-mix, and a powerful internal audio routing with a wide range of controls and I/O in a rugged and classy steel chassis.

The integrated digital signal processing delivers high-end quality with the latest features and flexibility. The console is as reliable and easy-to-use as an analog mixing console. The Oxygen 1000 BT features low latency, users preset, smart keys, EQ, compressors, telephone hybrid, HDMI output, analog and digital I/O, and USB. Oxygen 1000 can be remotely controlled through a dedicated application.

Fully Digital Broadcast Console    For Radio Broadcasting with 6 Faders    3 Microphone Inputs with Automix    4 Stereo Analog Inputs    4 Stereo Analog Outputs    Built-In Telephone Hybrid    Digital Signals Routing via 48×48 Matrix    5-Band Parametric EQ on Inputs    Dynamic Processing    HDMI Out for Console Status Display

• Oxygen 1000 BT is equipped with a Bluetooth module, which allows airing the calls made via GSM, Skype, Viber, and WhatsApp with a Smartphone, a Tablet, or a PC. Oxygen 1000 BT has two Bluetooth connection modes: bidirectional to support phone calls; monodirectional to put on air high-quality stereo audio (A2DP) streamed by Bluetooth sources.
• With Bluetooth calls, PFL enables PRIVATE conversation mode.

• Fully digital broadcast console for radio broadcasting with 6 faders
• A/B fast source switch buttons for each fader
• 4+1 busses (PGM, SUB, Aux1, Aux2, PFL)
• Near 0 latency (< 0,7 ms I/O)
• Digital signals routing via the 48×48 internal matrix
• Complete remote control by means of an application replicating the surface
• Remote configuration and maintenance via Web interface
• User-definable presets & snapshot
• 5-band fully parametric equalizer on every input
• Dynamic processor with expander and compressor section on each microphone input
• Advanced and configurable monitor facilities for control room and studio
• Customizable RGB colored buttons
• High-resolution (120 LEDs) meter bars for outputs
• HDMI out for console status display
• 2 Timers (ctrl-room and studio microphones timers on HDMI Monitor)
• Talk Box for guest and presenter (optional)

• 3 microphone inputs with Automix
• 4 stereo analog inputs
• 4 stereo analog outputs
• 1 built-in telephone hybrid
• 1+4 telco interface with GPIO
• Bluetooth audio interface
• 1 digital Out (AES/EBU)
• 2 USB audio interfaces (disabled with Dante option installed)
• 8 stereo inputs + 8 stereo outputs via Dante (optional)

• 3 microphone inputs with Automix
• Mic 1 on XLR, Mic 2-3 on RJ45, all balanced with + 48V phantom power and GPIO
• Independent ON AIR lights and Cut Off control, when opening control room and studio microphones
• PFL button switches to private conversation on Hybrid/Telco/Bluetooth mode
• Enable talkback feature on any studio or control room microphone
• Parametric compressors/expander (drive, threshold, attack time, release time) for microphone and mono inputs
• Save and recall microphone presets, including compressor/expander settings
• Phase inversion on microphone inputs
• Mono inputs assignable as EXT source
• Ducking / AutoFader assignable to all sources (automatic attenuation of music on speech)

Automix feature simplifies mixing activities in the presence of many guests in the studio.

The function adds, to the existing sources, a new source called Automix, which is the sum of all enabled microphones.

The Automix source has all the features of a microphone source such as:

• Studio/control room loudspeakers control
• Studio/control room light control
• Can be used as audio in private mode for phone calls

Using this new source, the user can manage in a very simple manner all the microphones of the studio with a series of benefits:

• Just 1 fader for the management of studio microphones
• A dedicated AGC section for each microphone input automatically adjusts the correct level
• Automatic management of attenuation on microphones not in use, simulating a slight closure of the fader
• Final compressor that allows an automatic leveling of the Automix source
• Possibility to use the microphones individually

This feature further simplifies the work of the mixer engineer, even in the case he/she is also the host of the show

Available settings in the Automix menu:

• MIC-1 ON/OFF
• MIC-2 ON/OFF
• MIC-3 ON/OFF
• Idle Mic Attenuation
• Attenuation attack speed
• Attenuation release speed
• Compression threshold
• Compression ratio
• Compression attack speed
• Compression release speed
• Autogain speed
• Autogain max gain
• Autogain max attenuation

• Line stereo inputs: 4
• Balanced on XLR for Line 1, Balanced on RJ45 for Line 2-4
• Channel mode selection: Stereo, Mono, L, R, INV-L, INV-R, INV
• Stereo-1 & DANTE-1 inputs can be configured as 4 Telco inputs

• 2 Built-in stereo USB (Type-B) I/O audio interfaces allow to directly connect the PC to the Oxygen 1000 console, with no need for audio cards
• In fact, the PC detects each of the console USB as a digital audio card with 1 stereo inputs and 1 stereo outputs for simultaneous playout and recording

• Telephone Hybrid: 1 POTS/PSTN telephone line with Line.In and Tel.Set connection
• Telco: 1 in/out N-1 to connect external telephone hybrid with control via TLC/GPIO
• 4 mono additional Telco can be obtained configuring analog inputs (Stereo-1 & DANTE-1) and (OUT-2 & DANTE-1) stereo outputs.
• GPI and GPO management on all 5 Telco channels
• RING and HOOK on F1 key for each TELCO channels
• N-1 on Telco outputs for all BUS (PGM, SUB, AUX-1, and AUX-2)

4 Balanced Outputs:

• OUT-1 – XLR – fixed as PGM
• OUT-2 – XLR – by default assigned as SUB
• OUT-3 – RJ45 – by default assigned as AUX-1
• OUT-4 – RJ45 – by default assigned as AUX-2
• OUT-2 stereo output can be configured as N-1 to achieve up to 2 mono additional Telco
• OUT-1 & OUT-2 outputs are both equipped with a GPO

AES/EBU output on XLR

• OUT-2-4 outputs: can be configured as studio presenter and studio guest headphones
• Unbalanced outputs: 2 line out on jack 6.3 for control room headphones
• Adjustable maximum control room and studio speakers volume (studio speaker only via SW)
• Adjustable maximum control room and studio headphones volume (studio headphones only via SW)
• Adjustable CUT or attenuation mode (-40, -30, -20, -10 dB) on control room and studio speakers
• Independent source selection (PGM, SUB, AUX1, AUX2, EXT) for control room and studio speakers, control room and studio headphones with or without PFL
• Independent Talkback management on control room and studio speakers
• Independent Talkback management on control room, studio headphones
• Same source selection for control room and studio headphones, with independent level

• GPI: 9 in total, for Talkback, Telephone Hybrid or other features
• GPO: 9 total, to control On Air lamps or provide HOOK and RING commands for external telephone Hybrid
• User custom GPIs (e.g. Ring, Talkback, channel ON/OFF, etc.)
• User custom GPOs (e.g. Hook/ONAIR, Studio-Light, Control Room-Light)

• Automatic firmware update via Internet
• WEB UI for console configuration and service features (save, restore, update, logs, etc.)
• Save and recall EQ presets (up to 10)
• New real-time EQ algorithm with graphic
• Fast and accurate LED meters display
• Save and recall control panel configuration with 10 Snapshots
• Save and recall total console configuration. The configuration can be saved to internal memory (microSD), USB and PC (via WEB interface)
• Gain adjustment knobs with adaptive speed
• Dimmable buttons light
• Adjustable fader ON/OFF threshold (from -50 to 0 dB)

• The built-in telephone hybrid allows direct connection of a telephone line POTS/PSTN on RJ-11C
• The audio is processed via DSP that delivers a state-of-the-art audio processing
• It's also available a Telco N-1 in/out, to connect Oxygen 1000 to an external telephone hybrid
• The Telco N-1 is always available on RJ45
• TLC commands are available on the same RJ45 with Hook and Ring interface
• TLC commands for Telco-2-5 are available and configurable on GPIO-DB9 connector with Hook and Ring

Monitor output that displays the following information:

• Audio input source levels
• 4+1 BUS output levels
• A/B source names assigned of 10 channels
• Display On-Air sources
• Microphone on timer (control room & studio)
• Large Clock
• Audio output level (loudspeakers & headphones)
• On-Air microphone
• Telephone active

Configure, for configuring all of the device features:

• HDMI output combined with 4 rotary knobs allow the fast and intuitive programming of all the mixer parameters
• The programming GUI has been designed in order to be very easy and intuitive
• Selectable home page layouts are available, with many theme icons

Related Questions and Answers

Q: 1. does it come with a charging cable?

A: The Tivoli PAL BT Portable Bluetooth Radio (Blue), BH # TIPALBTBLUE, includes: (1) PAL™ BT (1) Manual (1) Installed Li-Ion Battery Pack (1) Power Supply The radio charges via the included AC power supply.

Q: 2. When using in a public setting would someone in the crowd be able to connect via Bluetooth?

A: The Peavey PV 10 BT Mixing Console with Bluetooth requires the Bluetooth function to be turned on and also requires a specific "pin" number for pairing, which would make it difficult for an audience member to pair on their own. See PG6 of the product manual for more: https://bit.ly/33ilkeT

Q: 3. What Computer specifications are required?

A: The hardware requirements for Axel Technology XTV Television Automation Software is the following. Hardware Requirements Suggested I7 8700K CPU Windows 10 16GB RAM NVidia GTX Minimum I3 CPU Windows 7 4GB RAM

Q: 4. What are the watts?

A: The Tivoli PAL BT Portable Bluetooth Radio (Chrome) is 18 watts.

Q: 5. all outputs have signal dealy setup

A: Reverb and delay are available on all channels.

Q: 6. Is the bluetooth version 4.2?

A: The Tivoli PAL BT Portable Bluetooth Radio is bluetooth 5.0.

Q: 7. What is the case made of? Is the Chrome version metal or plastic?

A: The case of the Tivoli PAL BT Portable Bluetooth Radio (Chrome), BH #TIPALBTCHROM, is comprised of a weather resistant composite plastic/resin.

Q: 8. 110 to 240 volt or only 110?

A: The included power supply on the PV 6 BT will accept 110 or 220 Volt.

Q: 9. 1- does this take / transmit stereo or mono signal? 2 - Is the input mic, line or something in between level?

A: The Sennheiser BT T100 transmits stereo via bluetooth. The 3.5mm input on the Sennheiser BT T100 Transmitter is consumer line level.

Q: 10. Does the Peavey PV 10 include the 15 volt power supply? Does B&H carry the PV 10 Rack Kit?

A: The mixer wil come with the appropriate power supply. Please contact our Pro Audio Department to special order the rack kit, if required.