Hprc Wheeled Hard Case Black Blue Handle

Product Code: eq102466
Availability: In Stock

$1,033.50 $1,302.21

Qty

18 reviews Write a review

Description
Reviews (18)

This Wheeled Hard Case from HPRC is lightweight, waterproof, and designed to carry and protect rifles, tripods, or light stands up to 44" long. The case is black with a blue handle and meets ATA 300 specifications for shipping cases. The hard-resin shell is virtually unbreakable, an interior rubber O-ring keeps dust and water out, and it has an air pressure release valve. You can carry the case with the side folding handle or the top tow handle, or roll it along on the built-in wheels. Two interior bags are included for organizing the contents.

2 Interior Bags Holds 44" Rifles, Tripods, Light Stands Waterproof High-Strength Resin Exterior Meets ATA 300 Specification Air Pressure Release Valve Side Folding Handle Top Tow Handle Built-In Wheels

Key Specs
Color	Black
Carry/Transport Options	Wheels (Recessed), Handle • Number of Wheels: 2
Type of Closure	Latch
Interior Type	Main Compartment: Insert with Adjustable Dividers (Hook & Loop)
Laptop/Tablet Compatibility	No
Water Resistance	Waterproof IP67
Dimensions	Exterior 46.3 x 16.1 x 7.1" / 117.6 x 40.89 x 18.03 cm Interior 44.9 x 13.8 x 6.3" / 114.1 x 35.1 x 16 cm 1.8" / 4.5 cm (Lid Depth) 4.52" / 11.48 cm (Base Depth)
Weight	Not Specified by Manufacturer
Parameters
Carry/Transport Options	Wheels (Recessed), Handle • Number of Wheels: 2
Type of Closure	Latch
Interior Type	Main Compartment: Insert with Adjustable Dividers (Hook & Loop)
Laptop/Tablet Compatibility	No
Features
Pressure/Purge Valve	Yes
Security Lock	Accepts Padlock (Not Included)
General
Water Resistance	Waterproof IP67
Padded Interior	No
Materials	Exterior: Resin
Dimensions	Exterior 46.3 x 16.1 x 7.1" / 117.6 x 40.89 x 18.03 cm Interior 44.9 x 13.8 x 6.3" / 114.1 x 35.1 x 16 cm 1.8" / 4.5 cm (Lid Depth) 4.52" / 11.48 cm (Base Depth)
Weight	Not Specified by Manufacturer

Lightweight, unbreakable TTX01 resin exterior
Crushproof, extreme climate and weatherproof, resistant to acid corrosion and non-conducting
Neoprene PA66 O-ring keep the case air and watertight
Tight closures
Reinforced corners
Stainless steel hardware
Reinforced double-hinged locking system for increased safety and security
Molded-in hasp allows for optional padlock

Folding PSEB rubber handle on side
Fiberglass and aluminum top tow handle
Built-in wheels

Meets or exceeds ATA (Air Transport Association) 300 rating for shipping cases
IP67 military specification is an international standard IEC 60529 that classifies the level of protection against the intrusion of solid objects or dust, accidental contact, and water. The first digit indicates the level of protection the enclosure provides against access to hazardous parts and the ingress of solid foreign objects. The rating of 6 indicates the highest level of protection - no ingress of dust, complete protection against contact. The second digit indicates the protection of equipment against harmful ingress of water. The rating of 7 (out of 8) ensures that entry of water in harmful quantity shall not be possible when the case is immersed under defined conditions of pressure and time (up to at least 1m of submersion).
STANAG 4280 and DS 81-41 are NATO equivalents of military specifications for standardized endurance and quality tests designed to simulate extreme situations
Flammability rating of HB standard, V-0 available by Special Order: from UL 94 Flame Rating System

Related Questions and Answers

Q: 1. Can a button accordion, size 13.5 x 12.5 x 8 can fit in it?

A: The interior dimensions of the HPRC 3600 Backpack Hard Case with Foam are 18.9 x 13.9 x 7.6", so it can work for your application.

Q: 2. Will this case fit a Manfrotto 3046 plus fluid head?

A: The 3046 would be around the same dimensions as the interior of this case, so it will be a very tight fit.

Q: 3. Will this accommodate a Cendance remote or Crystal Sky? How many Batteries?

A: This case will hold up to 6 batteries, and should accommodate the crystal sky monitor. I do not believe this case will accommodate the Cedence transmitter.

Q: 4. Can this case fit one or more of the Manfrotto Alu Air-Cushioned Compact Stand (Black, 7.7')?

A: Yes, the Manfrotto Alu Air-Cushioned Compact Stands can fit in this case.

Q: 5. Could this be used as a carry on case for a flight?

A: Yes, you can use it as a carry on. I brought it on a flight to the Philippines just fine. Some airlines will have a weight restrictions, but they let me carry it on because they didn't want to be held liable for any damages. I was able to fit a 5d mkiii, 16-35, 24-70, 100L macro, 70-200 and a couple 600 RT flashes and room to spare for 3 batteries and a trigger. Very heavy lol.

Q: 6. The picture looks like it has two internal cases. Is there two or only one? What are the dimensions of the internal case?

A: Yes this case comes with 2 internal cases. Each bag has the following dimensions: Base: 5.12, Length: 44.48, and Height: 6.30.

Q: 7. Can you fit/add a pelican type set of zipper pouches to replace the top foam?

A: Yes, you can removed the foam in the lid on the HPRC 2550SSK HPRC Wheeled Hard Case with Second Skin (Black with Blue Handle), and attached the A-MoDe Limited Mesh Lid Organizer for Pelican 1510/1535/IM2500 Storm Case.

Q: 8. is there a possibility to see how this case looks with dividers please?

A: Unfortunately we do not have this in stock to take photos of. Best bet would be to reach out to HPRC customer service for more info at (201) 989-3353 or by email at info@hprcusa.com.

Q: 9. Can I padlock this case. I cannot tell from the pictures if there are secure holes for a padlock ?

A: Yes, you can. It's hard to see, but if you look at the second photo (https://bit.ly/3lPHUPY), right by the latch, you can see a hole meant for locks to go through.

Q: 10. Nice case. I would like to see a way to attach a tripod to the outside?

A: Unfortunately, a tripod cannot be attached on the outside of this backpack.

anyonymous	19/09/2024
[Latch] I use several of these cases to store my lightboxes, light stands, tripods, etc. Extremely well made and a good value for the money. 5

Tony	15/09/2024
[Latch] I was extremely impressed with the quality of the HPRC 2600WF case when it arrived. It was easy to customize the foam insert to suite my needs. The quality is far beyond what I expected. The materials are top notch and construction is very well thought out. The latches close very easily. I feel very confident that my equipment is well protected when in this case. 5

Thomas	21/08/2024
[Yes] This is great for light stands and small tripods. the build is less rugged then a Pelican but seems like it will do the job. Haven't traveled with it yet. We bought it to carry Matthews slider stands. It's lighter then the other cases at 18lbs and at the price kind of a no brainier. IT IS NOT the same build as a Pelican but lighter and better price. Time will tell. 5

Walt	15/08/2024
[Yes] The case is great for one camera with accessories including a spare lens, flash batterycharger. All items kept within are extremely well protected. You can rest assure that where ever you take it, the contents will be secure. For the cost of it, it should have included the case strap. This size case is good smaller cameras and because of the smaller size is not a case you're going to keep all your camera stuff in. It is a great day case. Overall it is excellent. 5

Mike	14/08/2024
[Black] Bought this to replace a Pelican case to store my Takahashi EM-200 mount in. The Pelican case was really too large, while this one is nearly a perfect fit. Would highly recommend. 5

Sandra P.	04/08/2024
[Yes] Excellent protection for my gear 5

Ali	03/08/2024
[Yes] Quite happy with the purchase I made, I have a few HPRCs, Pelican and Nanuk. Strongly I say I like the HPRC because of its better and smart design, more easy to use in terms of its locks design quality. I was restricted for my flight with two check-in luggages. I placed two tripods (photo-Video), 3 Manfrotto light stands(two small - one big) and an Edelkrone medium size pro slider with a few other small items. All fitted nicely and the total weight was about 24KG. 5

anyonymous	27/07/2024
[Latch] I purchased this case to carry our Vapor Intrusion Sampling equipment. I needed a case I could roll through airports with ease and strong enough to stand up to baggage handlers. I was able fit a 1/2 inch hammer drill, 50 ft extension cord, vacuum pump, Photoionization detector, and all our sample port equipment in the case with room to spare. I was really impressed with the sturdiness of the case and smoothness of the wheels. A better case than I expected for the price. I wish I knew a way to prevent the tearout foam from seperating with use. 5

javier	27/07/2024
[Latch] I am currently using this bag for carrying a slider. Is a sturdy bag, made with high quality standards, and thoughtful design. Totally recommended if what you seek is security.I'm using this bag for carrying a slider. It is robust, made with high quality standards, and thoughtful design. This product is highly recommended if you are looking to keep your computer well protected from bumps and transport. 5

James	23/07/2024
[Yes] When this isn't doubling as a seat, it holds my primary camera (BMPCC 4K) with its rig setup, lens, batteries, monitors, etc. that I use for a typical handheld cage setup or tripod mounting. I could probably squeeze in my shoulder rig kit as well, but that might be pushing it. Regardless, its built like a tank, comes filled with layers of foam for customizing, and has sturdy side handles and a top handle. Has both front and side latches to secure it closed (6 latches!) and a couple of spots for padlocks. 5