The 750' 8-Channel ST Single-Mode Fiber Tactical Snake Cable from Camplex is a ruggedized and lightweight multi-channel fiber optic cable designed for multiple deployments for field production in outside broadcast, rental houses, and more. It is a highly flexible, tight-buffered tactical cable with internal aramid strength members for crush resistance in high-traffic areas and a polyurethane outer sheath designed to withstand crushing by both military tanks and outside broadcast vehicles. All assemblies are multi-stage, machine polished and tested for <-55 dB RL with test results for each channel supplied with this cable.

Exceeds MIL-PRF-85045 Specifications    Helically Stranded Cable Core    For Outside Broadcast & Industrial    Crush Resistant

Related Questions and Answers

Q: 1. Does this converter support the Sony RCP700 protocol? RS422 at 560k Baud rate

A: Yes, it will work with the Sony RCP700 protocol RS422 at 560K baud.

Q: 2. Will this be able to handle a Sony full frame body plus a tele lens like the 70-200 f/2.8 GM?

A: Yes this tripod would hold that camera and lens combination well.

Q: 3. Remove head

A: Yes the Sirui K10x head can be removed from the Sirui ST125 ST-Series Carbon Fiber Tripod.

Q: 4. Diameter of upper leg segment?

A: The upper leg segment of the Sirui ST125 ST-Series Carbon Fiber Tripod with K-10X Arca-Type Ball Head has a 22mm diameter.

Q: 5. Do these have standard SMPTE 304 connectors on each end ?

A: The Canare Slim Tactical SMPTE Fiber Optic Camera Cable - FCFA to FCMA (501.9') uses an SMPTE 304M compliant connector and an SMPTE 311M compliant cable.

Q: 6. Will This work with the Blackmagic Design ATEM Talkback Converter 4K?

A: According to the manufacturer, this will work with the Blackmagic Design ATEM Talkback Converter 4K.

Q: 7. Is the SDI are BI directional? We would like to use the first 2 SDI as input in a switcher and the remaining 2 as OUTPUT for screens.

A: We'r afraid not. This is a transmitter and receiver kit, they are not bi-directional units.

Q: 8. Is it possible to use LC fiber with these assuming I use the appropriate LC to X media converter?

A: The Sescom SES-X-FA4LXT01 4-Channel XLR Line-Level Audio-over-Fiber Extender Kit is compatible with LC fiber without the need for an adapter, as it is designed for ST fiber cables.

Q: 9. Does this support full 4k60hz 12-bit color with 4:2:2 color space and Dolby Vision?

A: The unit supports 4K60hz at 12-bit -- the different levels of Dolby supported are as follows: LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X

Q: 10. Is this equipment and it's power cord enabled / compatible to work in United Arab Emirates?

A: This product runs off of DC power. 24 to 33 Vdc @ 55 mA.