You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Odyssey Vulcan Injection-molded Utility Case 13x9.5x3.75

Odyssey Vulcan Injection-molded Utility Case 13x9.5x3.75
  • Product Code: eq102562
  • Availability: In Stock

$218.85 $293.26

Made of a high-strength polymer resin, this Odyssey Vulcan Injection-Molded Utility Case 13x9.5x3.75case features an interior space of 13 x 9.5 x 3.75" and comes with convoluted foam under the lid. No foam is included for the interior space. The case is impact resistant, watertight, and dustproof. It has a comfortable carrying handle, a pressure release valve, and padlock holes. It's also stackable with other Vulcan cases of the same size.

Impact-Resistant Polymer Resin    Watertight and Dustproof    Pressure Release Valve    Padlock Holes    Stackable

Key Specs
ColorBlack
Interior TypeEmpty
Water ResistanceWaterproof
DimensionsExterior
15 x 14 x 6.4" / 38.1 x 35.6 x 16.3 cm
Interior
13 x 9.5 x 3.75" / 33 x 24.1 x 9.53 cm
Weight3.2 lb / 1.5 kg
Parameters
Camera CompatibilityUniversal
Interior TypeEmpty
Features
Pressure/Purge ValveYes
Security LockNo
General
Water ResistanceWaterproof
MaterialsExterior: Polypropylene
DimensionsExterior
15 x 14 x 6.4" / 38.1 x 35.6 x 16.3 cm
Interior
13 x 9.5 x 3.75" / 33 x 24.1 x 9.53 cm
Weight3.2 lb / 1.5 kg

Related Questions and Answers

Q: 1. Does this includes the 6U rack case inside the black carrying box? Or just the black box. Thank You

A: Hi Jonathan, It includes both the rack frame and the case. It does also includes rack screws and keys for the TSA locking latches. Thank you,Will

Q: 2. Is there sufficient padding on the top of the lid to justify keeping the laptop in the case at all times?

A: The SKB Injection-Molded 2 RU Studio Flyer Rack Case does not have any padding on the top lid, but this rack case is designed for safe storage and transport of a laptop and delicate studio gear.

Q: 3. Will the cutout for the Zoom H6 in the case fit a Zoom H5? If unknown, what are the dimensions of the cutout for the recorder in the case?

A: The Zoom H5 will fit this case as well.

Q: 4. If the rack is fully-loaded, is the steel very sharp/annoying when grabbing it out of the case?

A: No, you simply grab the upper left and right struts of the cage and lift. Easy to place back in as well.

Q: 5. What are the largest dimensions of the top workspace utilizing the holders?

A: The interior width is 19.00". The interior height: 3.5" and the interior depth rail to rail is 11.46".

Q: 6. will the Grundorf 75-110 Compact Will the Grundorf 75-110 Compact Rack Drawer RU) BH #GR75110 • MFR #75-110 fit?

A: Yes it will fit.

Q: 7. What are the dimension of that empty section? I have the boom mic attachment and I want to be sure it will fit.

A: Hi Nicholas, The dimensions of the accessory pocket is 8.5 x 2.75 x 2.5 .Thank you,Will

Q: 8. Is the Studio Flyer compatible with the SKB colored handles 3I-HD81-RD, etc? The picture looks the same. If so, what size, 81, 80, 73?

A: There are no compatible, colored handles offered by SKB for the SKB Injection-Molded 4-RU Studio Flyer Rack Case.

Q: 9. Would the H4N fit in the spot for the recorder and a Rode Reporter Omnidirectional Handheld Interview Microphone fit in the accessories spot?

A: Hi Cameron, The H4N is wider than the H5 and unfortunately will not fit into this case. We do have a custom cut case for the H4N. BH's model is SK3I09074B01. It doesn't look like the rode reporter mic would fit into that case. You could purchase our 3i-1209-4B-C case that comes with cubed foam or you could get our 3i-1209-4B-D that comes padded dividers. Either one of those cases would give the length you need for the microphone and space for the H4N and other accessories.Thank you,Will

Q: 10. I can’t tell from the photos. Does the lid detach and flip around or?

A: This lid detaches completely from the unit as shown in the picture bellow https://www.bhphotovideo.com/c/product/1315906-REG/skb_1skb_isf2u_injection_molded_2u_studio.html

23/09/2024

[Empty] Nice to have a case where my Zoom H8 fits perfectly inside. I always hate when I have to remove foam for my equipment to fit in. The case is built strong.

5
21/09/2024

[Yes] 4 Rack spaces and Just enough room inside. Rails in front and rear came loaded with phillips screws. I didn't expect that...

Very practical for stowing extra items and fits together nicely.

5
03/09/2024

[Empty] The case has a very strong rigid exterior, a real hinge, secure latches, pressure vent, lid gasket and rubber grip handle. Interior has the depicted cutouts for the H5 and another for whatever you can fit into the area. The lid has an egg crate soft foam liner. This is a great case for the equipment that it is designed.

5
29/08/2024

[Universal] We use this case to carry a field mixer for high school athletic broadcasts. This case has done a great job protecting our equipment.

5
27/08/2024

[Yes] This thing is awesome. Very sturdy and portable 2U case. Velcro and the device holders that go on top are high quality. Lots of possibilities to use this for.

5
18/08/2024

[Empty] I like this case very much. A lot of foam padding and the mics sit well in the cut-outs. I can also put the mic cables in the square section. Lots of room for storage of mic clips, etc. You can customize it to your needs. Latches keep the lid on securely.

5
16/08/2024

[Empty] Quality case, well made, good latches. I've been a full time professional Photographer for 40 years - owned lots of cases from inexpensive to custom. This case equals the big name cases at half the price. Recommend.

5
21/07/2024

[Yes] Nice foam option to fit dynamic and small condenser mics securely. The extra space for things is nice. You can fit some condensers and mic clips in there. This case could definitely be thrown down a flight of stairs with out braking.

5
15/07/2024

[Yes] I used it to travel on a plane, very easy to move around and fits perfectly in the overhead compartment.

5
28/06/2024

[Universal] This is a great hard case for the Zoom H5. It provides perfect fit and protection with room for accessories. Well worth the price.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Usw 24 Port Managed Switch

$690.00 $993.60

Products You May Like

Tilta Screw Kit For Fujifilm X-t3 X-t4

$36.00 $46.08

Yongnuo Yn900 Daylight Rgb Led Light Panel

$525.00 $803.25

Miniature Schnauzer Pulling Leash

$6,107.85 $7,329.42

Rupert Neve R10 500 Series Rack | 10 Space

$2,997.00 $3,656.34

Losmandy Dual Dovetail Saddle For Telescopes

$747.00 $1,165.32