The Lectrosonics SMV Wireless Microphone Transmitter 941-959MHzincorporates Lectrosonics patented Digital Hybrid Wireless technology into a package no bigger than a pager. The SMV transmitter is miniature in size yet rugged enough to withstand rigorous daily use in the field or in studios.

To meet the demand for both extended operating range and extended battery life, this version of the SMV transmitter offers a selectable output power of 50 or 100 mW. The 50mW option is provided for some theatrical applications, where the system design specifies lower transmitter power. Channel spacing is also selectable, with 100 and 25 kHz options available. With the spacing set to 100 kHz, the SMV transmitter offers 180 user-selectable UHF frequencies in this block; if that's not enough, setting the spacing to 25 kHz gives you up to 684 frequencies to work with. 

Lectrosonics patented Digital Hybrid technology revolutionizes wireless microphone transmission. Digital audio signal is converted and encoded for analog transmission, then decoded and converted back to digital audio at the receiver. The result is an exceptionally low noise floor as the compandor circuit is eliminated and clear audio reception is retained at greater distances.

The Switchcraft TA5M audio input has a user-calibrated 44 dB gain range, and accepts electret lavalier mics, dynamic mics, or line-level signals. A DSP-controlled analog audio limiter is employed before the A-D converter. The limiter has a range of more than 30 dB and a dual-release envelope, making the limiter transparent while maintaining low distortion.

The non-corrosive, machined aluminum casing is splash proof and features an LCD display with membrane switch control panel. The transmitter is powered by one AA lithium, NiMH, or alkaline battery for up to 7.25 hours (lithium). The SMV transmitter is completely compatible with all Lectrosonics Digital Hybrid wireless receivers as well as older Lectrosonics analog receivers.

Frequency Block E07-941    Digital Hybrid Wireless Technology    Selectable RF Output Power    180 UHF Frequencies at 100 kHz    Membrane-Switch Controls, LCD Display    Wide Input Dynamic Range    DSP-Based Pilot-Tone Signal    Circulator/Isolator Output Stage    Splash-Proof, Machined Aluminum Housing    Non-Corrosive, Damage-Resistant Finish

This version of the SMV features selectable 50 or 100 mW output power.

The miniature design allows for a variety of mounting possibilities in film, video, theater, performances, etc.

Lectrosonics incorporates digital and analog audio technology to enhance range and eliminate the noise associated with compandor circuits.

A locking TA5M input is compatible with Lectrosonics and third-party microphones and cables. The input accepts line- and microphone-level signals.

The SMV transmitter is completely compatible with all current Lectrosonics Digital Hybrid receivers and offers compatibility modes for older analog models.

The polished aluminum enclosure is moisture proof and ideal for use in rain.

The SMV transmitter is powered by one AA alkaline, NiMH, or lithium rechargeable battery. With Lithium power, the unit is capable of up to 7.25 hours of use.

Related Questions and Answers

Q: 1. without the do-it-all handle, any other way to connect it to osmo pocket 2?

A: For an alternate connection, you will need to use the DJI USB-C to 3.5mm Mic Adapter for Pocket 2 and Osmo Pocket (BH #DJOP35A • MFR #CP.OS.00000010.02) for an alternate connection between the DJI Pocket 2 and DJI Wireless Microphone Transmitter for DJI Pocket 2 (2.4 GHz).

Q: 2. Is it compatible with DJI Osmo Action Camera?

A: The DJI Wireless Microphone Transmitter for DJI Pocket 2 (2.4 GHz) is not compatible with the DJI OSMO Action Camera.

Q: 3. Does this work with the original DJI Osmo Pocket?

A: This is defined as having compatibility only with the Pocket 2.

Q: 4. this unit come with one 3.7V battery or two?thanks.

A: One.

Q: 5. what is the matching reciever?

A: The Lectrosonics SMQV Super Miniature Wireless Microphone Transmitter is compatible with any Lectrosonics Digital Hybrid receiver in the correct frequency block, such as BH #LEUCR411A21.

Q: 6. without the do-it-all handle, any other way to connect it to osmo pocket2?

A: For an alternate connection, you will need to purchase the DJI USB-C to 3.5mm Mic Adapter for Pocket 2 and Osmo Pocket (BH #DJOP35A • MFR #CP.OS.00000010.02) and can connect to the Pocket 2 via 3.5mm connection.

Q: 7. I have a lot of Sennheiser lavs with a 3.5mm connector. Is there an adapter that will connect my Sennheiser mics to the 3 pin lemo of this receiver?

A: Unfortunately there would be no adapters available to connect a lavalier wired with a Sennheiser mini jack to connect with a Lectrosonics transmitter.

Q: 8. what is the smqv connector? is TA3M? or TA5M?

A: The connector is a TA5.

Q: 9. Could these, along with the DCHR, be used as another set of talent wireless sets to be plugged into a mixer/recorder?

A: The Lectrosonics DCHT Wireless Digital Camera Hop Transmitter can be used together with the Lectrosonics DCHR Camera-Mount Miniature Digital Camera Hop Wireless Receiver as a wireless IFB system to send audio from a mixer/recorder.

Q: 10. Will this work as a wireless mic for other cameras of is this somehow designed specifically to only work with the pocket 2? Can I connect to a canon r6 mark II?

A: The DJI Wireless Microphone Transmitter for DJI Pocket 2 (2.4 GHz) is specific to the DJI Pocket 2. For use with various cameras, you will need the DJI Mic 2 Compact Digital Wireless Microphone System/Recorder for Camera & Smartphone (2.4 GHz), B&H # DJMIC21TX1RX.