The 1500' 12-Channel LC Single-Mode Tactical Fiber Optical Snake Cable from Camplex is a ruggedized and lightweight multichannel fiber optic cable designed for multiple deployments for field production in outside broadcast, rental houses, and more. It is a highly flexible, tight-buffered tactical cable with internal aramid strength members for crush resistance in high-traffic areas, and a polyurethane outer sheath designed to withstand crushing by military tanks or broadcast vehicles. All assemblies are multi-stage, machine-polished, and tested for <-55 dB RL with test results for each channel supplied with this cable. The nominal overall diameter of the cable used in this series is .26" (6.5mm).

Designed for Field Production    Highly Flexible, Tight Buffered    Crush Resistant

Related Questions and Answers

Q: 1. Will This work with the Blackmagic Design ATEM Talkback Converter 4K?

A: According to the manufacturer, this will work with the Blackmagic Design ATEM Talkback Converter 4K.

Q: 2. The interior dimension of the bag appear to be smaller than the size of mixer. Does the bag fit?

A: Yes the bag fits the mixer. Forced perspective can be deceiving.

Q: 3. Is it possible to use LC fiber with these assuming I use the appropriate LC to X media converter?

A: The Sescom SES-X-FA4LXT01 4-Channel XLR Line-Level Audio-over-Fiber Extender Kit is compatible with LC fiber without the need for an adapter, as it is designed for ST fiber cables.

Q: 4. Will this amp work with Bose Virtually Invisible 191 Speakers? Some list this speaker at 6 ohm's. The spec for this amp list 4 or 8 ohm's not 6.

A: Yes, this would be compatible. Bose lists the specs of the Virtually Invisible 191 speakers as 100w @ 8 ohms, but this amplifier would be compatible with speaker that are 4 - 8 ohms.

Q: 5. What does the back side look like? Any easy way to mount against a wall or underside of a table?

A: There is not a built in way to mount the stage box, but, the back plate is attached by 4 screws which can be removed and you can drill through the back plate to install on a wall or desk. Or, you can use a strip of heavy duty hook and loop tape (velcro) to secure it to a surface.

Q: 6. Does this support full 4k60hz 12-bit color with 4:2:2 color space and Dolby Vision?

A: The unit supports 4K60hz at 12-bit -- the different levels of Dolby supported are as follows: LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X

Q: 7. Will the input B on the back accepts quarter inch input? I see a XLR and a quarter inch jack there.

A: Channel B has XLR connectors. The 1/4 inch connectors are for channel A and the link outputs.

Q: 8. What is the video latency ?

A: Good Morning Marcelo. our CMX-HDMI-TR set is considered zero latency. Thank you!

Q: 9. Is the USB output of this board in stereo? The USB output of the v2 was mono mix

A: According to Mackie's specifications, the integrated 2x4 USB audio interface for ProFXv3 series mixers provides USB 2.0 format, A/D/A 24-bit at 44.1, 48, 96 or 192 kHz with one stereo input and two stereo outputs. The ProFXv2 series mixers have an integrated 2x2 USB audio interface that is USB 1.1 format, A/D/A 16-bit at 44.1 or 48 kHz with one stereo input and one stereo output.

Q: 10. What is the difference between the Lite and full license for Main Console?

A: The Lite version is required for the PC-Based Software, while the full license only works on the Main Console.