Videosync Grabber Box By Pengo Technology

Product Code: eq103321
Availability: In Stock

$237.00 $331.80

Qty

11 reviews Write a review

Description
Reviews (11)

The VideoSync Grabber Box by Pengo Technologyis the ideal capture card for professional streamers to simultaneously play FPS or co-op games while capturing and streaming up to 4K video. Two HDMI inputs can connect to your streaming camera and gaming system, while one HDMI loop output and USB Type-C output broadcast that content. Use of the system with the GUI interface enables dual HDMI input as well as the use of Picture-in-Picture and Picture-by-Picture modes.

A 3.5mm TRRS headset I/O allows you to hear the sounds of your game while recording your commentary to embed into the stream. VRR and FreeSync monitors can be activated while operating the VideoSync. The device is compatible with Windows 8 operating systems or higher.

Capture up to 4K Video Play Game and Capture/Stream Two HDMI Inputs, HDMI and USB Output Picture in Picture, Picture by Picture 3.5mm TRRS Headset I/O Windows Compatible

Inputs / Outputs
System Connection	USB-C 3.0 / 3.1/3.2 Gen 1
Video Inputs	2x HDMI (2.0) Female
Audio Inputs	No
Video Outputs	1x HDMI (2.0) Female (Loop Output) 1x USB-C Female (Loop Output)
Audio Outputs	1x 1/8" / 3.5 mm TRRS Headphone/Microphone Analog Female
Format Support
Input Video Format	HDMI (4:4:4/4:2:2/4:2:0 RGB, YUV, YCC) UHD 4K at 24/25/30/50/60 fps DCI 4K 60/144 fps 1080p 24/25/30/50/60/120/240 fps 1080i 50/60 fps 720p 50/60 fps
Output Video Format	HDMI / USB-C (4:4:4/4:2:2/4:2:0 RGB, YUV, YCC) UHD 4K at 24/25/30/50/60 fps DCI 4K 60/144 fps 1080p 24/25/30/50/60/120/240 fps 1080i 50/60 fps 720p 50/60 fps
Output Audio Format	LPCM (Linear Pulse-Code Modulation): 48 kHz / 16-Bit
Embedded Audio	USB/HDMI
Standards
HDCP Support	No
EDID Support	No
HDR Support	Yes
Hardware
OS Compatibility	Windows 8 or Later
Power I/O	1x Barrel Input
Environmental
Operating Temperature	32 to 113°F / 0 to 45°C
Operating Humidity	20 to 90%
General
Dimensions	7 x 5.8 x 1.3" / 177.5 x 146.5 x 33.5 mm
Weight	29.3 oz / 830 g
Packaging Info
Package Weight	2.945 lb
Box Dimensions (LxWxH)	12.4 x 8 x 2.1"

Active VRR and FreeSync on your monitor while using capture card

GUI interface with Picture-in-Picture and Picture-by-Picture modes

Maximum resolution in PiP/PbP DCI 4k at 60 Hz or 1080p at 120 Hz

Compatible with OBS, XSplit, vMix, Zoom, and Skype

Related Questions and Answers

Q: 1. Is the mic input audio carried over the USB output? Or does the USB only carry audio from the HDMI input?

A: This captures 1080p60fps audio/video via USB.

Q: 2. It appears that this device does not take 4K video from a camera and output to a USB on a computer for streaming/video conferencing. Am I wrong?

A: The unit is rated for 4K video capture and transmittal over USB.

Q: 3. Will this work with an iPhone 12 feeding it HDMI?

A: No, it's not compatible. OS Compatibility: Windows 8.1 Windows 10 Linux 2.6.38 or Later macOS 10.13 or Later

Q: 4. How is the heat with this? Should I add a heat sink on top? I'm only planning to capture in 1080p, not 4k.

A: A heat sink is not required.

Q: 5. Have any of the Pengo capture devices, I see three different models listed for sale on the site, been tested on the new M1 Macs?

A: This Pengo Technology HDMI to USB Type-C 4K Grabber, would work with the M1 Mac computers.

Q: 6. Is this usable with an HDMI switcher for HD video cameras?

A: It can be fed the program out from a switcher for capture.

Q: 7. Will this work with the canon a30 camcorder?

A: yes, this will work with a canon a30 camcorder with HDMI

Q: 8. Can it grab the DirectTV video/audio signal?

A: No it can not. DirectTV (and all the other cable/satellite providers) has Copyright Protection built into their boxes to prevent devices like these from working.

Q: 9. What type of cable are people using to connect to USB C on macbook pro? I bought an Anker USB C to USB 3.0 and it's not working.

A: As others said, you can use the included cable to get this up and running.

Q: 10. Is this compatible with Canon 5DMkiii?

A: Yes, it is compatible.

KP	26/09/2024
[20 to 90%] what I care the most is its sharp edge, have to be very careful when plug and pull cables from it, you might cut yourself. 5

Daniel	21/09/2024
[20 to 90%] I'm using this to run a Sony 4K camcorder for streaming and video calls where I needed better resolution and lighting. Works perfectly and allows me to do the same with my laptop when travelling. 5

Victor	11/09/2024
[12.4 x 8 x 2.1"] I had to teach online last minute and this was a lifesaver. A different capture card I have has too much lag making my lessons unwatchable. When I used this one there was virtually no lag with a great image. 5

Bruce	13/08/2024
[12.4 x 8 x 2.1"] I use this video grabber to convert HDMI video and audio output from my Canon XA40 camcorder to USB 3.0 connected to my Windows 10 laptop for Zoom streaming. So far, it has worked great. I have an external mic connected to the XLR input of my camcorder, so the audio is excellent as well as the video coming out of the HDMI camcorder output. Because I am using this device in a somewhat unique way, I had to come up with my own way of attaching it to my camcorder tripod. The grabber has a rubber padded base, but no standard 1/4-20 UNC threads for mounting to a tripod. I ended up re-purposing a cellphone holder designed to mount on a tripod. I had a clamp I used to attach the holder to a leg of the tripod. It works perfectly! Another tip! I use gaffer tape to help support the weight of the cables coming out of the camera to this device and an external field monitor I use. This helps take the stress off the plugs going into and out of the camera and attached devices to avoid damage to your expensive equipment. 5

Matt	02/08/2024
[2.945 lb] Does all I need it to do 5

Brian	11/07/2024
[USB/HDMI] The video grabber is a very clever product. Unlike another popular converter the Video Grabber allows conversion of HDMI to USB (of course) but also allows HDMI pass through and has outlets for audio microphone input and headphone output. For me it serves the purpose I had hoped very well which is to take the 1080P video output from a D-SLR to my computer for multi-media presentations. I now have the ability to switch from a WebCam, To the D-SLR and to share the presentation screen of the computer file. 5

Frank	29/06/2024
[20 to 90%] Just works. Plugged it into USB3, and the HDMI attached camera simply works everywhere I want to use it, like OBS Studio, Zoom, etc... 5

Tim	09/06/2024
[20 to 90%] Initial impression is I really like it. It's very nice to check camera feed on big TV before and as it goes out streaming. Spatial and temporal resolution is great. I did notice once during the first Zoom meeting that the HDMI audio died (after muting on Zoom, it wasn't there on un-muting), but I was able to get it back by toggling input on Zoom interface. Not sure yet if that was a Pengo or a Zoom issue though. 5

Joseph	19/05/2024
[20 to 90%] Easy plug and play setup 5

David	06/05/2024
[USB/HDMI] I'm using this capture card to process the output of my DSLR for use on Zoom meetings. Setup was seamless, and it works flawlessly with my MacBook Pro and Canon EOS RP. I know there are software workarounds to get the combination to work on Zoom, but the hardware is the quickest to set up and easiest to use. 5