The Aquatica SURVEYOR Moisture Alarm for Nikon D7000from Aquatica SURVEYOR Moisture Alarm for Nikon D7000offers an added level of protection to the underwater photographer. The SURVEYOR circuitry integrates a water detection function that remains on constant duty when a battery is inserted. Should the slightest amount of water make contact with the sensor probes, it will trigger an alarm using both an audible signal and a rapidly flashing red LED to visually attract your attention. Adding the vacuum pump and pressure valve to your housing will make it possible, by creating a vacuum inside the housing, to fully test its sealing integrity. Once the easy-to-follow procedure is completed, a green LED blinking every five seconds will inform you that your SURVEYOR system is monitoring your camera housing and you're ready to dive. In the event that sand, hair, or other foreign matter would compromise the housing sealing integrity, the SURVEYOR warns you with both an audible signal and a rapidly flashing red LED signal.

This kit includes the moisture and vacuum sensor circuit, a pressure valve with retaining nut, a vacuum pump, mounting hardware, a container of O-ring lubricant, and a CR2032 battery.

Red Flashing LED When Water is Detected    Vacuum Pump to Verify Seal Before Dive

Related Questions and Answers

Q: 1. Are these delivered in pairs or do i need to order 2 pcs to have one on each arm?

A: The Aquatica T Style Base includes one base. You need to order two if you are shooting with dual lights.

Q: 2. Is there an option of alarm set off?

A: Yes, you can turn the alarm off on a Sony Radio Alarm Clock (BH #SOICFC1BLACK • MFR #ICFC1BLACK).

Q: 3. Can I get a good audio quality recording video with NTG5 in an iPhone (with adapter)?

A: An adapter between an iOS device and the NTG5 would not work because the NTG5 requires phantom power. So you would need to use an audio interface that can provide phantom power to the NTG5 and is compatible with iOS devices, like B&H # IKIRIGPREHD for example.

Q: 4. How many lumens is the light? The company makes a flashlight that is 170 lumens

A: I counted 30

Q: 5. How this as a camera mounted mic on a Sony Fx9 for run and gun doc work.

A: Remove the included pistol grip shock mount and use the camera's microphone holder.

Q: 6. How do i set the alarm?

A: slide the top rear left button to the middle position , then use the two buttons next to the one that slides to move time up,and down. You can tell the alarm is on by an icon that appears on the upper left of the display. When you wake up, you silence the alarm with the small button on the middle row in front of the slider. The benefit of this is that the alarm remains in for the next day so you don't forget to turn it on. The downside is that little silence button is hard to find in the dark when half asleep. And don't forget to slide the alarm go off on Friday night!

Q: 7. How do you set the time on this radio clock?

A: Press and hold ENTER/TIME SET (on back) for more than 2 seconds. The year will flash. Press + or - to set the year; then press ENTER/TIME SET to enter month, day and time.

Q: 8. If I wake up before the alarm can I cancel the alarm (meaning that it will not go off at the intended time today but will be set to go off tomorrow) or do I have to move the slider to the off position?

A: Slider has to be moved to off

Q: 9. Can I use this alarm clock in Israel where the electric current is 220V?

A: I was out of town and sorry for late reply!This alarm clock is only for 120v - 60Hz, and no battery power

Q: 10. What are dimensions?

A: The dimensions for the Lightning Strike are 7 x 5.5 x 2.5 weight is .60lbs.