From Camplex, the Premium Bend Tolerant OM3 Multimode Duplex ST to LC Fiber Patch Cable, 16.4' long and with an aqua OFNR jacket, is suitable for 10 Gigabit applications and can be used with both LED and VCSEL laser light sources. The cable can be used to connect patch panels or network devices that require 50/125 multimode cabling. The duplex cable is joined together in a zipcord style for easy separation. Other key features include ceramic ferrules for long-lasting reliability and precision alignment.

OFNR Jacket    10 Gigabit Application Support    Use with LED & VCSEL Laser Light Sources    Connect Patch Panels or Network Devices

10 Gb/s application support

Duplex cable is joined together in a zip-cord style for easy separation

Features a Laser-Optimized 50-µm core and 125-µm cladding

Use with both LED and VCSEL laser light sources

Ceramic ferrules for long-lasting reliability and precision alignment

Used to connect patch panels and/or network devices that require 50/125 multimode cabling

OFNR jacket complies with stringent building codes

Related Questions and Answers

Q: 1. Is there any loss of power or slowing of recycle time using this or the even longer extension cable?

A: There would be no loss of power or slowing in the recycling time using this EC2400 Extension Cable for the H2400P Head in the 16.4' or 32.8' size.

Q: 2. Is this wire rated to be pulled in conduit underground?

A: Yes this would definitely be rated to run through underground conduit.

Q: 3. Does this require both Optical Fiber ports to be plugged in or will it work off a single LC SM cable?

A: On the DIGITAL FORECAST Quad 3G Transmitter/Receiver Extender Kit over Duplex LC Single-Mode each fiber connection carries 3 SDI signals. The TX box would be 2 TX and 1 RX on each fiber. The RX box would be 2 RX and 1 TX per fiber. You would be able use a single fiber cable if you only need half the capacity of the DIGITAL FORECAST Quad 3G Transmitter/Receiver Extender Kit over Duplex LC Single-Mode.

Q: 4. What is the diameter of the upper leg section?

A: The diameter of the upper leg section of the Sirui ST-224 Waterproof Carbon-Fiber Tripod is 29.4mm.

Q: 5. What is the video latency ?

A: Good Morning Marcelo. our CMX-HDMI-TR set is considered zero latency. Thank you!

Q: 6. Does this have a Edison 3 prong plug on end? Cant tell from picture.

A: No, the Godox Connect Cable for KNOWLED F600BI Panel (16.4'), is an extension cable from the Panel to the Controller box. From the Controller box there will be a separate 3 prong Edison power cord.

Q: 7. Can this be broken down so it's not four feet long in a travel bag?

A: No, the E-Image BC16P Carbon Fiber Telescoping Boompole with Internal Cable & XLR Base (16.4') cannot be disassembled for a smaller physical footprint when transporting.

Q: 8. How much does the head weigh? It says 2.6 pounds, so does that include the head to as it reads differently.

A: The weight of the included Sirui VA-5X Compact Fluid Video Head with Side-Loading Plate is 1.3lb.

Q: 9. hello what kind of optical line with this?

A: This product uses LC Single Mode Fiber.

Q: 10. Will this cable work to connect a schoeps CMBI to a regular 3 pin xlr input with phantom power?

A: The CMBI is designed for connection to unbalanced high impedance inputs and to allow the capsules to be battery powered or powered externally via plug in power (+6v max) . It would not be compatible with the K 5 LU or phantom power.