The Bescor MP101 MP6VA L-Series Plate 5VUSB MPDTAP PS260 RE50 Kitattaches between a tripod and camera and enables remote panning and tilting of the camera. Two independent motors smoothly operate horizontal and vertical motion at adjustable speeds. The head supports payloads up to 6 lb. The two mounting points are the 1/4"-20 female threads underneath and the 1/4"-20 camera mounting screw with registration pin on top. All tripods and cameras are compatible.

An Auto Pan Mode allows for continuous panning motion, and a switch selector lets you assign end points at 45°, 90°, or 340°. The maximum horizontal angle is ±170 degrees, and the maximum vertical angle is ±15 degrees. This head can power by four AA batteries, the Bescor PS-260 AC power supply, or a Bescor 90-645 external battery, all sold separately.

MP101 Motorized Pan/Tilt Head Kit    D-Tap Power Adapter Cable & USB Cable    L-Series Battery Plate    2 x 50' Remote Extension Cables    PS260 AC Power Adapter, Remote Control

• Enables panning and tilting of a camera remotely at adjustable speeds
• Attaches between a tripod and camera
• 1/4"-20 threads for tripod; 1/4"-20 screw mount for camera
• 6 lb payload
• Remote control included

Related Questions and Answers

Q: 1. Will this provide the proper output voltage of the input is lower than 14 volts. Mine will be providing about 7.4 volts. Thanks!

A: Yes, the Bescor NPW126SDTAP Coupler/Dummy Battery & D-Tap Adapter Kit for Select FUJIFILM X-Series Cameras will provide the proper output even if the voltage is lower than 14 volts.

Q: 2. Will the AC adapter work with Fujifilm battery grips?

A: if the grip takes NP-W126 battery , it should be compatible

Q: 3. can you close the battery door if you use it with an X-T3?

A: Yes, the XT3 has a rubber gasket by the door to allow for a cable to fit.

Q: 4. What's the dc jack size of this item?

A: The DC jack size of this item is.Outer diameter is 3.5 mm.Inner diameter is 1.1 mm.

Q: 5. I own a pair... Each has a plastic flap on the back. What's it for?

A: You can lay the Bescor LED-95DS panels on the floor and use the back flap to help angle the light to give floor lighting.

Q: 6. I see that Fuji X-T2 is omitted from list of compatible cameras. oes this work with X-T2 ? If not, why not ?

A: Hello! Just a simple oversight, yes this will work with your X-T2!

Q: 7. How would you extend the cable to around 10-12 feet so the battery pack could be far away from the bescor head? I want to put bescor head on a pole and trying to minimize weight up high

A: The Bescor MP6VA L-Series 6V Battery Adapter Plate cannot be extended.

Q: 8. Does this power supply convert the 14.4V coming from my V-Mount batteries to a safe for the X-T3 7.2V? I assume it does but it doesn't explicitly say this anywhere and I don't want to fry my X-T3 with double the rated voltage input.

A: Yes, the Bescor NPW126SDTAP Coupler/Dummy Battery & D-Tap Adapter Kit for Select FUJIFILM X-Series Cameras (B&H# BENPW126SDTP) kit, when used as a whole (i.e. with both its D-Tap style plug and cable and dummy battery) will convert the voltage to the appropriate level for your camera from a 14.4V, 14.6V, or 14.8V power source. Typically, that source would be a V-Mount battery. More than 90 percent of V-mount batteries sold are in the 14-14.8V voltage range, and those will be fine. Please do not use the Bescor NPW126SDTAP Coupler/Dummy Battery & D-Tap Adapter Kit for Select FUJIFILM X-Series Cameras (B&H# BENPW126SDTP) with batteries or power supplies of other voltages such as 12.6V, 26V, or 28V.

Q: 9. This isn't working in my XT-3. Is there something I missed? Is this incompatible with that camera?

A: There is no reason why it shouldn't work. I would exchange it for another unit.

Q: 10. Hi does this works with Canon R3 ?

A: Yes the Bescor LPE19D & DRE19X AC Kit is compatible with the Canon R3.