Lab.Gruppen Lucia 60/2M Compact Matrix Amplifier 30W

Lab.gruppen Lucia 60/2m Compact Matrix Amplifier 30w

Product Code: eq103499
Availability: In Stock

$1,497.00 $2,335.32

Qty

10 reviews Write a review

Description
Reviews (10)

System installers in search of a high-quality amplifier should check out the Lab.Gruppen LUCIA 60/2M, a compact, 2-channel 60W matrix amplifier for A/V installation applications. Localized Utility Compact Intelligent Amplification (LUCIA) offers advanced audio performance and flexibility to a decentralized approach in AV systems design. Power, processing, control, and I/O are conveniently placed exactly where they are needed.

In many AV applications requiring consistent performance, LUCIA offers a logical, cost-efficient, and scalable solution that often eliminates the complications and added expense of a centralized equipment room. The half-rack space enclosure provides fast and easy installation. The supplied wall-mount bracket allows for deployment in discreet locations, such as behind video displays or next to a projector or podium. The Lab.Gruppen LUCIA 60/2M includes Euroblock input and output screw terminals, a power cord, and mounting hardware.

Compact Two-Channel Amp: 2 x 30W Comprehensive DSP Integrated Mix-Matrix 4x4 Configuration Wizard Energy-Efficient Class-D Amplifier Automatic Dynamic Loudness Contouring Auto Load Sense Automatically Sets VPL Comprehensive Circuit Protection Includes Phoenix Connectors & Power Cord Limited 5-Year Warranty

Key Specs
Number of Channels	2
Amplifier Power Rating	2 Ohms / 4 Ohms / 8 Ohms: 2x 30 W Peak per Channel 16 Ohms: 2x 15 W Peak per Channel
Amplifier Class	Class-D
Load Impedance / Voltage	2 / 4 / 8 / 16 Ohms per Channel
Analog Audio I/O	2x Block 6-Pin Balanced Line Input 1x 2RCA TS Female Unbalanced Line Input 1x Block 6-Pin Balanced Line Output 1x Block 4-Pin Speaker Output 1x Block 6-Pin GPIO Input/Output
Rackmount Size	1 RU (1/2-Rack)
Amplifier
Number of Channels	2
Amplifier Power Rating	2 Ohms / 4 Ohms / 8 Ohms: 2x 30 W Peak per Channel 16 Ohms: 2x 15 W Peak per Channel
Amplifier Class	Class-D
Load Impedance / Voltage	2 / 4 / 8 / 16 Ohms per Channel
Performance
Frequency Response	5 Hz to 22 kHz
Input Sensitivity	Block: 1.23 Vrms / 4 dBu (Balanced) RCA: 0.62 Vrms / -2 dBu (Unbalanced)
Input Impedance	10 Kilohms
Max Input Level	12 dBu / 3.09 Vrms
SNR	> 95 dBA (at 8 Ohms)
THD	0.3% (Full Range, at 1 W) 0.2% (1 kHz, at Rated Power)
Crosstalk	> 60 dB (1 kHz)
Common Mode Rejection Ratio (CMRR)	40 dB
Signal Processing
Audio Delay	Adjustable Up to 137 ms
Crossover	Yes
Limiting	Yes
Connectivity
Analog Audio I/O	2x Block 6-Pin Balanced Line Input 1x 2RCA TS Female Unbalanced Line Input 1x Block 6-Pin Balanced Line Output 1x Block 4-Pin Speaker Output 1x Block 6-Pin GPIO Input/Output
USB I/O	1x Mini-USB (Service)
Power
AC Input Power	100 to 240 VAC, 50 / 60 Hz
AC Power Connector	1x IEC 15 A / NEMA 5-15
Power Consumption	1 W (Standby)
Physical
Rackmount Size	1 RU (1/2-Rack)
Cooling	Fan (Variable Speed)
Certifications	CCC, CE, CSA, ENERGY STAR, FCC, PSE
Dimensions	8.5 x 1.8 x 11.0" / 215.9 x 45.7 x 279.4 mm
Weight	4.2 lb / 1.9 kg
Packaging Info
Package Weight	6.375 lb
Box Dimensions (LxWxH)	13.6 x 13.5 x 4.3"

Compact matrix amplifier, which offers full output power across a range of loads with 2 x 30W into 8, 4, or 2 ohms
Comprehensive onboard DSP with loudspeaker processing and innovative features, which enhance performance and simplifies system design and commissioning
4x4 matrix allows mixing and routing all inputs to amplifier output channels and 2 balanced line-level outputs
Configuration software wizard for initial setup and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac
Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs
Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level
Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multiband compressor, and look-ahead limiter
Optimized presets available for a wide range of loudspeaker models for fast configuration
Enhanced Bass Profile for extended LF response with small loudspeakers
Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load
Efficient Class-D amplifier with low distortion and minimal heat dissipation
Compact form factor in a half-rack, 1 RU chassis with supplied bracket for discreet on-wall mounting
Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control, and integration with paging systems
Comprehensive circuit protection for fail-safe operation, including short circuit, thermal, and undervoltage protection
Universal power supply supports 100 to 240 VAC at 50/60 Hz
Intelligent fan control for silent operation at idle and at lower output levels
Front-panel power and fault indication as well as per-channel signal LED and attenuation knob
Balanced, high-quality analog inputs and amplifier outputs on detachable screw terminals
Parallel analog input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources
Rackmount kit, pole-mount kit, and wall panel kits available as accessories

Related Questions and Answers

Q: 1. What is the tube diameter

A: The diameter of the Manfrotto Boom Assembly, Black - 6.5' (2m) is 25mm.

Q: 2. Does the remote control on the Pyle Pro PTA42BT allow to raise and lower the volume?

A: Yes, the remote has Vol - and Vol + buttons.

Q: 3. Does it include Bluetooth out?

A: This doesn't transmit a Bluetooth signal, it receives them.

Q: 4. Will the output continue to the speakers even if I connect a headset to the headset jack?

A: The audio will still continue for the Pyle Pro 4-Channel Compact Stereo Amplifier System with Bluetooth (B&H # PYPTA42BT) even when a headphone is plugged in. The headphone input will have its independent volume control.

Q: 5. Can I use one of these vertically on the side (If I had two) so it would be like a vertically adjustable column?

A: Assuming you have a special reason for doing this, you can attach one vertically. The weight of anything you put on it would have to be balanced from the other side though for the horizontal piece to slide without binding as well as to keep it from falling.

Q: 6. Is this device strong enough to hold an EOS r with a 100 mm macro lens for digitizing negatives above a light box?

A: Yes, But a end-user must be mindful that the unit is only as strong as the tripod supporting it.

Q: 7. will it connect to bluetooth headset?

A: Not directly, You would need a Bluetooth transmitter.

Q: 8. Is this amp bridgeable for mono?

A: The MA255 does not support bridged mono operation.

Q: 9. Can this play all 4 speaker channels at once?

A: Yes, you can run all four output channels at the same time.

Q: 10. Do I need a special adapter to use this on my oben tripod?

A: This TAB-2M Two-Mount Tripod Accessory Bar can fit the base plate of your Oben tripod.

John	11/09/2024
[2] Yes, it is very lightweight and plasticky and feels cheap for the price. BUT, it is super convenient, sounds great and loud enough as a portable practice amp. I use it to practice outside in my backyard, my bedroom, pretty much anywhere and it is so easy and sounds way better than those 2 watt micro amps. Plus it has bluetooth so I can play backing tracks or music while practicing. Really awesome! 5

Macattack	29/08/2024
[10 Kilohms ] This is a great all metal ballhead. I use it with a Pedco ultra clamp to hold my Drift HD. The plastic ball head that came on the ultra clamp still didn't provide complete stability in high vibration situations. The Slik sorted this out perfectly, without being too bulky or heavy. As usual excellent service from the team at BH. Great range of products, prices and customer service. Thanks v much! 5

Frank	12/07/2024
[40 dB] Tiny but mighty! About the size of your thumb. Tough, all metal construction. Light 1/8 turn of the knob is all that's needed to lock the ball solidly. Rotate and tilt in every direction. GoPro, phone, probably an SLR, whatever. I've been a fan of Slik since the 90s when I had a giant trigger ball for a giant VHS camcorder. In this photo, the phone clamp is not included. 5

Neal	12/06/2024
[Class-D] This is a fantastic unit. If you are dealing with a small install this unit has everything that you need. I have now put it in 4 buildings and it is performing perfectly in all of them. The power output cannot be matched. Easy set up and operation. I also highly recommend using the remote zone controller. The Cat5 connectivity is by far one of the best features on this unit! 5

Shotgun	16/05/2024
[2] This item is very small and lightweight. I purchased it for one purpose only, to mount my Gopro camera on a medium light stand. For that purpose it works perfectly, and I give it 5 stars for supporting this camera. However I would NOT ask it to support much more weight than that of a Gopro camera, or similarly sized item. 5

Michael	11/05/2024
[1 RU (1/2-Rack)] Fast & secure!!! 5

Roger	23/04/2024
[Class-D] For some time I have been driving two spdif devices off one spdif output. One was about a 40 foot run of cheap audio coax type cable. I often had erratic audio performance at the end of the long line no doubt due to poor signal quality. I had considered building my own distribution amp but when I found this product at this price point it looked efficient to try it. The product is housed in a pretty nice small metal box. It's a little tippy on top of my stack of instruments but seems to work very well driving the short and long spdif runs. I also now have two more channels available to add spdif runs to other rooms also. Thanks you. 5

Frank	18/04/2024
[2] A small, light, quiet, transparent amplifier with 4 channels (2 stereo pair for me) to solve a problem in my home studio. I drive a pair of Yamaha NS-10M and a pair of UREI 809s (yeah, old school) and use the volume controls to switch between them when monitoring my work. Plenty of power for my control room (remember, it's a home installation). A little pricey but I trust QSC and they delivered. They worked as advertised, the documentation was great, no problems. I did consider ditching the speakers and getting a pair of powered monitors, but I am used to listening to these and they haven't let me down yet. 5

ARCSOUNDPRODUCTIONS	09/04/2024
[1 RU (1/2-Rack)] With all the new cameras that are coming out having only a switchable in or out timecode. This little unit is the answer to all my timecode issues. Not to mention the care and support that M.S.C. gives to their product. 5

Film Lives	30/11/-0001
[1 RU (1/2-Rack)] This little ball head is great on a monopod so you can tilt the camera for vertical shots. And I use it on flash brackets so I can aim the flash in the desired direction to bounce light off of walls and ceilings. 5