Camplex Duplex St To Sc Singlemode Fiber Cable 16.4'

Product Code: eq10357
Availability: In Stock

$62.85 $78.56

Qty

5 reviews Write a review

Description
Reviews (5)

Transmit your data at high speeds and at longer distances with the Camplex Duplex ST to SC Singlemode Fiber Cable 16.4'from Camplex. This 16.4' cable comes with an orange OFNR jacket that covers a 9μm core along with 125μm of cladding. Camplex has outfitted this cable with an ST duplex connector on one side and the other end features an SC duplex connector. Furthermore, ceramic ferrule is used to offer precise alignment of the fiber cable as well as increased reliability.

9µm Core 125µm Cladding Duplex ST to Duplex SC Connectors OFNR Jacket Ceramic Ferrules

Key Specs
Connector 1	ST
Connector 2	SC
Cable Length	16.4' / 5 m
Fiber Type	Single Mode (Yellow)
Parameters
Connector 2	SC
Cable Length	16.4' / 5 m
Fiber Type	Single Mode (Yellow)
Core Size	9 µm
Return Loss	< 65 dB
Attenuation	0.3 dB/km @ 1310 nm 0.3 dB/km @ 1550 nm
Bend Radius	3.1" / 80 mm
Operating Conditions	-4 to 176°F / -20 to 80°C
Safety Certification	OFNR
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	6.5 x 6.5 x 0.45"

Features a 9μm core and 125μm cladding

Duplex Singlemode Fiber

Ideal for patching singlemode backbones to high-speed network devices

Ceramic ferrules for long-lasting reliability and precision alignment

Used to connect patch panels and/or network devices

OFNR jacket complies with stringent building codes

Related Questions and Answers

Q: 1. What is the delay between input and output?

A: There is no latency or quality degradation with this Avenview 4K HDMI 2.0 Extender over Fiber Optic Cable, However, this product has now been replaced by the 8K version which you can find here FO8K-DP-XX-MM with the same properties and characteristics as its predecessor. 8K version link https://bhpho.to/36T5lFt

Q: 2. Is there any loss of power or slowing of recycle time using this or the even longer extension cable?

A: There would be no loss of power or slowing in the recycling time using this EC2400 Extension Cable for the H2400P Head in the 16.4' or 32.8' size.

Q: 3. Is it safe to use this splitter cable with a Bolt Cyclone DR PP-400DR power pack and 3 Nikon SB-910 speedlights (or similar flashes) set to full power? I want to connect two flashes to one power pack socket using the splitter and another flash to the second socket. But I am hesitant whether the power drawn by three SB-910s simultaneously could overheat the battery pack or cause a malfunction.

A: Here is a response from Bolt:It would be safe, but only if you leave enough time between shots for the battery to cool down. 20 second interval minimum.

Q: 4. What DC cable will work with this Active repeater?

A: This device does not support DC.

Q: 5. Does this have a Edison 3 prong plug on end? Cant tell from picture.

A: No, the Godox Connect Cable for KNOWLED F600BI Panel (16.4'), is an extension cable from the Panel to the Controller box. From the Controller box there will be a separate 3 prong Edison power cord.

Q: 6. Will this work with ELB 500?

A: This cable will work with an ELB 500.

Q: 7. Are we able to cut these to size and still use the end we cut off?

A: Yes, they can be cut to size and still use the opposite end.

Q: 8. Can't the old original 'gray cube' charger be used to charge the new batteries? Afterall they are still Ni-Cad batteries.

A: No, the old gray cube charger is for Lead Acid batteries and is not compatible with the new batteries.It can create pitting on the batteries which can make the batteries unstable.

Q: 9. Is this compatible with Bolt PP-300?

A: Yes, this splitter cable is compatible with the Bolt PP-300.

Q: 10. What's the frame rate & chroma? Does it use compression? What grade of optical fiber? Thanks!

A: Transmitter grade: 4 ch 850nm Multi-mode 50/125Mm(OM3) VCSELReceiver grade: 4 ch GaAs PIN photo DiodeFrame rate supported: up to 60HzChroma Sampling is 4:4:4 8bit , 4:2:0 10bit and its uncompressed.Thank you

Tim	13/09/2024
[0.05 lb] We use this to get audio/video to the front and back of large conference rooms, works great. The cable is only as thick as a single regular XLR cable. 5

Aaron	25/08/2024
[< 65 dB] Cable worked as expected. We use it for our field camera on football game days. We can move all over the field without a signal drop. 5

Samuel	13/08/2024
[0.05 lb] Well made product! 5

Philip	11/05/2024
[9 µm] Works well with USB 3 and USB 2 (and below) devices, which is rare. The vast majority of optical USB cables available work with only one or the other. (A USB3-only cable won't transfer USB2 traffic even with a hub on the remote end supporting both.) This cable is transparent to almost all my USB devices, including a scanner that didn't work on a usb-over-ethernet extender previously. The only thing that hasn't worked through it for me was a bluetooth adapter -- though I'm not sure if that's due to the cable or the hub I have attached to it. If it matters to anyone, this cable shows up as 1a40:0101 Terminus Technology Inc. Hub. 5