The Bescor MP101 MP6VA L-Series Plate USB D-Tap Cables Kitattaches between a tripod and camera and enables remote panning and tilting of the camera. Two independent motors smoothly operate horizontal and vertical motion at adjustable speeds. The head supports payloads up to 6 lb. The two mounting points are the 1/4"-20 female threads underneath and the 1/4"-20 camera mounting screw with registration pin on top. All tripods and cameras are compatible.

An Auto Pan Mode allows for continuous panning motion, and a switch selector lets you assign end points at 45°, 90°, or 340°. The maximum horizontal angle is ±170 degrees, and the maximum vertical angle is ±15 degrees. This head can power by four AA batteries, the Bescor PS-260 AC power supply, or a Bescor 90-645 external battery, all sold separately.

MP101 Motorized Pan/Tilt Head Kit    D-Tap Power Adapter Cable & USB Cable    L-Series Plate, BCK18 Battery & Charger    PS260 AC Power Adapter, Remote Control    90-645 Extended External Battery/Charger

• Enables panning and tilting of a camera remotely at adjustable speeds
• Attaches between a tripod and camera
• 1/4"-20 threads for tripod; 1/4"-20 screw mount for camera
• 6 lb payload
• Remote control included

Related Questions and Answers

Q: 1. Does this adapter take the place of batteries, can I run it on this adapter only and NP battery?

A: The Bescor MP6VA L-Series 6V Battery Adapter Plate for MP-101 Pan/Tilt Head would allow you to work with Sony NPF-L (NP-F970) style batteries. It would replace any other batteries you were working with on the MP-101 Pan tilt head. It could replace the need to use internal AA batteries. We have also listed batteries that work with the MP6VA adapter below. SmallRig NP-F970 Dual-Battery and Charger Kit BH #SM3823

Q: 2. what battery pack will this kit work with?

A: You could use just about any V-mount battery that has a D-tap such as the GVM V-Mount Battery with D-Tap and DC Outputs BV-95, BH # GVBV95. https://bhpho.to/3BSvcdJ

Q: 3. Is there anyway to mount the battery on the cage on BMPC 4K ?

A: you wouldnt want to do that. if you need to do that for handheld, put it on your waist. or gaffe tape it to the rig. or velcro it around something.

Q: 4. Will this provide the proper output voltage of the input is lower than 14 volts. Mine will be providing about 7.4 volts. Thanks!

A: Yes, the Bescor NPW126SDTAP Coupler/Dummy Battery & D-Tap Adapter Kit for Select FUJIFILM X-Series Cameras will provide the proper output even if the voltage is lower than 14 volts.

Q: 5. This items is compatible for canon eos 80D

A: Yep! It sure is!

Q: 6. Does this battery work with BMMPC?

A: Yes it works pretty well with the BMCC.

Q: 7. Can you get with much shorter cord?

A: Unfortunately you cannot. We do not have this product available with a shorter cord.

Q: 8. Is this a 5.5 mm barrel?

A: Yes, the barrel of the Bescor 2.5mm Female to 2.5mm Male Power Extension Cable for MP101 would be 5.5mm.

Q: 9. Do the v-mount plates supply power to the Sumo, or are they merely battery holders - requiring use of the D-Tap cables to supply power?

A: Hello John, Thank you for your question, the V-mount plates at the back of the Sumo are battery holders, to be combined with the D-tap to XLR4 power cables supplied in the package. They are essential to power the Sumo monitor. We hope this helps and we thank you for your interest in our products. Best regards, The SHAPE team

Q: 10. Can you still mount a vesa adapter to this so you can put on a stand?

A: Yes, you will still be able to use a VESA mount adapter when using the SHAPE 2 x V-Mount Plates & D-Tap Cables for Atomos Sumo.