Jbl Base Plate Srx906La | Secure Mounting Solution

Jbl Base Plate Srx906la | Secure Mounting Solution

Product Code: eq103635
Availability: In Stock

$1,665.00 $2,664.00

Qty

8 reviews Write a review

Description
Reviews (8)

Audio professionals looking to ground-stack a SRX900 Series line array will need the JBL Base Plate for SRX906LA Arrays. The base plate is a universal adapter frame that allows up to six SRX906LA arrays to be ground stacked atop of compatible subwoofers or support structures such as scaffolding, stages, or carts.

The rear angle selection bar allows for angles ranging from -15 to +5°. For smaller setups, the base plate is compatible with the JBL pole mount adapter, which connects to the SRX918S or SRX928S subwoofers via the M20 connector. The pole mount configuration can support up to two SRX906LA arrays. Additionally, the three included M10 through-holes can be used to permanently attach an SRX906LA array to other support structures.

Enables Ground Stacking SRX906LA Arrays Allows Attaching Arrays to Subwoofers Universal M20 Threaded Pole Mount Angle Range: -15 to +5° Works with VTX PM Pole Mount Adapter Support for up to 6 x SRX906LA

Parameters
Type	Hardware
Material of Construction	Steel
Dimensions	19.3 x 17.5 x 2.2" / 490 x 445 x 55 mm
Weight	9.3 lb / 4.2 kg
Packaging Info
Package Weight	14.04 lb
Box Dimensions (LxWxH)	23 x 18.8 x 7.1"

Enables ground stacking SRX906LA arrays
Allows attaching arrays to subwoofers
Universal M20 threaded pole mount
Angle Range: -15 to +5°
Compatible with VTX PM pole mount adapter
Support for up to 6 x SRX906LA

Related Questions and Answers

Q: 1. Is this designed to work with my Sennheiser EW G4 receiver?

A: No the EW-DP Mounting plate is intended for the EW-D EK portable receiver and the manufacturer does not list any other units for compatibility.

Q: 2. Will this fit on the Sirui ET2204?

A: The Sirui KP-59 Mounting Plate is compatible with the Sirui ET-2204 Travel Carbon Fiber Tripod.

Q: 3. can I use a ball head with it?

A: Absolutely! :)

Q: 4. Will this work with the Ronin SC to mount a small monitor?

A: Yes, this should work with the Ronin-SC as well.

Q: 5. Will the base of the Kirk TLB-1 be too large for the apex on my Lefoto LS-364C? The apex diameter is quoted at 60 mm, but this includes the protrusions over the leg locks: the circular diameter on which the head or leveling base would sit is closer to 55mm. My concern is that the Kirk TLB-1 will interfere with the leg locks on my tripod, when the legs are adjusted to be horizontal. I'll be using the Manfrotto MVH500AH fluid head - so, Kirk Industries recommended the TLB-1 vs the TLB-2. However, if the base of the TLB-1 will be too large for my LS-364C, I guess I'll have to look more closely at one of the Acratech leveling bases...

A: The Kirk TLB-1 will fit on your tripod, but for your specific question, you would need to try it.

Q: 6. Is the hole pattern on the bottom of this made to some sort of standard for anti-rotation pins?

A: Yes, the Falcam F22 Quick Release Mounting Base has anti-rotation support for other Falcam F22 options, and standard ARRI rotation pin support.

Q: 7. what thread size are the feet?

A: The thread size of the feet are 1/4-20".

Q: 8. can I use with a ball head ?

A: The Glide Gear LayLow Mounting Plate has mounting options for both the standard 1/4"-20 male tripod thread and the larger 3/8"-16 female tripod sockets used on the base of ball heads. As such, yes, you may connect a ball head to the Glide Gear LayLow Mounting Plate.

Q: 9. Does my monitor need a screw mount on the side in order to use this? I have a 7" monitor with only a screw mount on the bottom.

A: In order for the included arm to be effective with a 7" monitor, it would be recommended to use a monitor with a side 1/4" 20 screw mount. Otherwise, you may want to consider a longer alternative arm along with the Ronin mount individually: DIRSM01. https://www.bhphotovideo.com/c/product/1441471-REG/digitalfoto_solution_limited_rs_m01_dji_ronin_s_mounting.html

Q: 10. is it compatible with sachtler 0364 plate?

A: No. The Sachtler 0364 is a non arca-swiss-style receiver plate and will not mount to the following system.

Dallas Sound Guys	07/08/2024
[Steel] I got to use a single SRX 906LA on this baseplate on top of a tripod with the VTX PM adapter. During sound check certain notes from the keyboard were causing a rattle. I was worried that my new speaker had a problem. Turned out to be the M20 wing nut washer. I wasn't using it so I put it back where it stores the angle plate. But without the angle plate the washer is loose and rattles at 400! Simple fix. Keep this in mind or you'll think your speaker has a problem, it probably doesn't. Either leave off the M20 wing nut if you aren't using it or maybe use a few extra washers so the stock washer isn't loose. The M20 is meant to mount this plate to a sub, but if you mount to a tripod, keep this in mind. The plate is amazing otherwise! 5

Martin	03/08/2024
[14.04 lb] Excellent case all around. Very happy with purchase. 5

Bethany	01/08/2024
[Hardware] Fixes the mess of threads Canon decided would be acceptable configuration for a cinema camera. The side NATO rail is perfect for adding your choice of side handle and makes the C70 even more comfortable for handheld use. Best of all it's well made and reasonably priced. 5

Zach	24/05/2024
[Hardware] A great inexpensive option for basic mounting on S and SC gimbals. Plenty of articulation and clearance for all your basic monitors and small LED lights. Can't really beat it for 16 bucks. It's also conventional rigging so if you have camera cages or other stuff it will work with that too. 5

Kasey	14/05/2024
[Steel] Straightforward, does what it says. Always great quality from Tilta. 5

Paul	21/04/2024
[Hardware] Very good thanks a lot 5

Eduardo	21/04/2024
[14.04 lb] Very good, very price 5

Chadwin	14/04/2024
[Hardware] The mount is made of solid metal and fits perfectly. Since DJI wasnt smart enough to add a standard 1/4 20 thread mount anywhere on the Ronin S, Im glad I found this! I use it to mount my monitor and it works great. 5