The WX50 Digital Frequency Agile Handheld Plug-In Wireless System from CAD is a quick, easy-to-use UHF mic system ideal for presenters, performers, karaoke parties, or anyone looking for a straightforward wireless microphone system. With the QuickMic connection design, the receiver can simply be plugged directly into any soundboard or PA system that possesses a 1/4" input and features extended battery life, a range of 164' between the receiver and the included mic, and a frequency agile design with 16 switchable frequencies.

The microphone comes equipped with a built-in transmitter and can run on two AA batteries for up to eight hours of operation, and both the USB rechargeable receiver and battery powered transmitter feature low-battery indicators. The transmitter is outfitted with a CADLive style capsule as well as an on/off mute button. The package also comes with a foam windscreen for outdoor use, a hexagonal rubber sleeve for protection against damage, and a 1/4" to 3.5mm plug adapter for the receiver. For situations where extremely compact size, minimal setup time, and ease of use are of paramount importance, the CAD WX50 can be an ideal choice.

For Presenters, Performers, and Karaoke    Frequency Agile Design (16 Frequencies)    Up to 164' Range    QuickMic Connection Directly into Mixer    CADLive Style Neodymium Capsule    Handheld Transmitter Takes AA Batteries    8 Hours of Life with 2 x AA Batteries    Rechargeable Receiver Battery via USB    Mute On/Off Switch on Mic/Transmitter    Includes 1/4" to 3.5mm Plug Adapter

• Fully digital audio
• Frequency agile design with 16 switchable frequencies
• Use up to 15 systems at the same time in ideal conditions
• Up to 164' range in ideal conditions
• Proprietary QuickMic connection plugs straight into mixing board via integrated 1/4" jack
• Handheld transmitter with CADLive style dynamic Neodymium capsule
• Transmitter and receiver feature low-battery indicators
• Mute on/off switch on mic
• Handheld transmitter utilizes AA batteries with  up to 8 hours of operation
• 20 Hz to 16 kHz frequency response
• 500 to 599 MHz frequency band

Related Questions and Answers

Q: 1. Can a GXLIEM Single-Mix Transmitter Station send the same signal to 4 bodypack receivers all set to the same channel?

A: Yes, there is no limit to the number of receivers the CAD GXLIEM Single-Mix In-Ear Wireless Monitoring System can transmit to.

Q: 2. Hi friends, before ordering the Transmisor GXLIEM4,I would like to know if I can connect it directly to notebook to transmit through zoom app 4 speakers, or is it necessary to pass through an audio table? BR, Abraham

A: You could come directly from a headphone into the transmitter with a 3.5mm to 1/4" cablle. You would need to send a mono signal out of the headphones. This unit however is made to transmit to headsets, not speakers.

Q: 3. Are the inputs stereo TRS? Do the receivers receive and output audio in stereo?

A: No, the CAD GXLIEM4 Quad-Mix In-Ear Wireless Monitoring System provides mono audio input and output. The inputs on the transmitter base are 1/4" TS and the receivers have a 3.5mm TRS headphone output connection for dual mono audio so you will hear the same audio through both ears.

Q: 4. Can you set two headsets to listen to the same channel?

A: Yes you can set two receivers to the same channel in the CAD GXLIEM4 system.

Q: 5. How does battery charging work here?

A: The CAD GXLIEM2 Dual-Mix In-Ear Wireless Monitoring System uses AC power for the tranmitter, and the included CAD GXLIEMBP Bodypack Receiver uses two AA batteries for powering. AA batteries, if rechargeable, should have their own proprietary charger.

Q: 6. Is this SKP 500 G4 plug-on transmitter compatible with the EK 100 G4 Receiver (instead of the EK 500), or with an older G3 receiver?

A: Yes, the SKP 500 G4 plug-on transmitter is compatible for use with the EK 100 G4 receiver or an older G3 receiver, but only if the components operate on the same frequency band.

Q: 7. Do they come with a case?

A: No

Q: 8. I have the Sennheiser EW 112P G3-B Omni-directional EW system. Will this work with the G3 receiver?

A: Hi Brian - while Evolution Wireless G4 is backward compatible with EW G3, the products need to operate within the same frequency range. Your current product is the EW 112P G3 in the B-Range, which is 626-668MHz and the AW+ range of this SKP 500 is 470 - 558MHz, so they wouldn't be compatible. The larger issue is that the FCC has effectively banned wireless devices in the 600MHz range, effective July 13, 2020 - to help offset the costs of transitioning to new, legal devices, Sennheiser is offering a rebate on the trade-in of 600MHz products and the EW 112P G4 sets are also on sale through the end of April 2020 at B&H.

Q: 9. Can the 48v Phantom Power be switched off if not needed?

A: Yes, the 48v phantom power can be turned off for dynamic microphones.

Q: 10. Stereo or mono?

A: Mono