An enhanced version of its predecessor, the Godox AD200Pro Flash Kit for Canon Camerasfrom Godox AD200Pro Flash Kit for Canon Camerasis built around a unique flash source with a standard speedlight head and a bare bulb head that give you the option of two distinctly different qualities of light. The kit comes with the two heads, lithium battery, charger, and carry case.

The speedlight head outputs the standard look of an on-camera flash that can be modified using an optional softbox, beauty dish, or umbrella. The bare bulb head features a removable flash tube and produces 360 degrees of soft, bright, nearly shadowless light. The head uses optional reflectors that focus the beam angle and give you directional control. The AD200Pro has impressive core features such as 200Ws of power adjustable in 9 steps from 1/256 to 1/1, recycling from 0.01 to 1.8 seconds, and flash durations as short as 1/15,380 sec. The flash runs on a removal, rechargeable lithium battery that will give you up to 500 full power flashes and thousands of lower power flashes.

The AD200Pro has 3 flash modes: Manual, TTL, and Multi (Stroboscopic). Manual outputs the user's choice of power, modeling light, first or second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (90 Hz). TTL takes advantage of the flash head's built-in X1 receiver. Optional X1 TTL transmitters are available for Nikon, Canon, Sony, Olympus, and FUJIFILM cameras. They will also detect a separately purchased LED head. The 32-channel wireless system controls flash mode, first and second curtain sync, High-Speed Sync up to 1/8000 second, power level, modeling lamp, and ready beeper at distances up to 328'. Firmware updates are obtainable on the Godox website.

AD200Pro Pocket Flash w/ Receiver    Flash Trigger for Canon    Bare Bulb Head, Battery and Charger    Speedlite Head, Color: 5600K    1 x Case

The second generation of this sleek and versatile strobe, the AD200Pro has a series of enhancements over its predecessor:

• Dedicated Stable Color Temperature Mode, which improves color consistency to within +/- 100K throughout the entire power range

• Expanded nine stop power range, from 1/256 to 1/1, with 1/10th-stop increments

• Faster full-power recycle time of 1.8 sec

• Inclusion of a USB Type-C port for updating the flash's firmware

• Upgraded metal flash holder/umbrella mount for more secure and stable attachment to light stands

• Enhanced control panel with recessed design, additional navigation buttons, and a revised On/Off switch

Built-in wireless receiver: control triggering power level, alert beep with optional wireless transmitter. Compatible with Nikon, Canon, Sony, Olympus, and Fuji TTL.

Bare bulb and speedlight flash heads are included to vary your quality of light. Color temperature is a steady 5600K over the entire power range.

The 14.4V / 2900mAh battery pack gets 500 full power flashes with 0.01 to 1.8 second recycling.

Easily readable digital panel displays your adjustments

Barn Doors, color filters, and diffusers are available to personalize your work.

• 9-Step Power Range: 1/1 to 1/256
• Supports flash exposure compensation
• 1/8000 second High-Speed Sync
• First and second curtain sync
• Modeling lamp
• Manual flash
• Multi flash
• Custom functions

Related Questions and Answers

Q: 1. Do we need to buy a version for your Camera brand? I have Olympus

A: The AD200 Pro TTL Pocket Flash Kit can work with an Olympus camera, as long as you use an Olympus compatible trigger like the Godox XProO TTL Wireless Flash Trigger for Olympus and Panasonic Cameras, BH # GOXPROO https://bhpho.to/3jdi2he

Q: 2. Is the rear display screen the same as the non pro version or has the problem of hard readability in bright sunlight been resolved with a new screen type?

A: There are no reports as to the brightness of the rear LCD of the new lamp. If no different than the previous lamp, we suggest making a shade to help when outside or controlling remotely and avoiding looking at the rear entirely.

Q: 3. I intend to use my new Canon R3 and 580EX in slave mode with the AD200Pro with the included Godox transmitter. Will this setup work with the 580EX as described?

A: Yes. 100% have the ad200 drive the system and trigger off the unit via slave mode.

Q: 4. Can this be used with the nikon d5600?

A: Yes, with the Godox trigger for Nikon.

Q: 5. Is there a way to use this unit with any other trigger besides Godox and still have full wireless control?

A: You must use a Godox transmitter to have full control.

Q: 6. The charger for the battery, can i plug it into a 220v outlet or just 110v?

A: The charger is multi voltage and will work on a 220V outlet if you add a plug end yes.

Q: 7. Can this AD200 Pro be mounted on the Westcott Rapid Box 26" Octa Softbox? Maybe adding the S-type bracket and something else?

A: You can attach the AD200 Pro to the Elvid Heavy Duty Camera Shoe Mount Adapter with Ball Head for Monitors B&H # ELSHOEHD , which allows it to fit the cold shoe mount on the Rapid Box bracket. https://bhpho.to/39Okl3D

Q: 8. The Godox AD200PRO is compatible with the Sony FA-WRC1M Wireless Radio Commander ??

A: It is not. You will also need to purchase the Godox transmitter that has the Built-In Wireless X Radio System built in.

Q: 9. Will this Godox work with Canon 7D without any extra triggers?

A: You need the Godox transmitter to use the Godox AD200Pro TTL Pocket Flash Kit. There are a few transmitter options that work with the Canon 7d. They are, https://bhpho.to/3HF1g5a .

Q: 10. How am I supposed to attach the softbox to the bracket? I can force it on but it is very difficult/ takes a long time. It also is starting to tear the opening of the softbox. Is there some kind of speed ring that I need?

A: The following system comes with a s2 bracket. Please review the following item Godox S-Type Speedlite Bracket for Bowens BH #GOSZ1 • MFR #S https://bhpho.to/3rtVmyc