Camplex 24" Lemo Fxw To St Fiber & 6-Pin Amp Cable

Camplex 24" Lemo Fxw To St Fiber & 6-pin Amp Cable

Product Code: eq10456
Availability: In Stock

$1,298.85 $2,026.21

Qty

10 reviews Write a review

Description
Reviews (10)

The Camplex 24" LEMO FXW to Duplex ST Fiber & 6-Pin Amp Power Breakout Cable is a certified multistage machine polished cable exceeding SMPTE specifications. It is an internal distribution breakout cable for panel mounting in blank panels or as a replacement in hybrid devices. This pre-terminated SMPTE hybrid breakout cable features LEMO 3K.93C connectors feeding out to both Duplex ST optical connectors and a copper leads wired to an AMP connector for power. It is suitable for use in SMPTE rack panels, splice trays, adapters, and wall boxes.

Assembled with premium flexible US SMPTE standard studio broadcast cable, this composite cable integrates the power line for TV camera, control line, and optical fiber for video and audio transmission. The cable is standardized by SMPTE for HDTV broadcast camera use. It consists of 2 single-mode optical fibers, and four 20 AWG and two 24 AWG tinned copper conductors cabled around a steel strength element, with an overall tinned copper braid. This general purpose cable is used for studios, patching, and light to medium field use. A flexible PVC blend jacket allows for ease of use within the studio.

Parameters
Connector 1	FXW
Connector 2	ST AMP 6-Pin
Coupling Type	LEMO (SMPTE)
Cable Length	2' / 0.6 m

Assembled with premium SMPTE cable and LEMO and Senko connectors

Industry standard cable

Terminations by LEMO trained technicians

Electrical assemblies 100% tested for continuity and short circuits

Fiber optic assemblies 100% tested for attenuation and back reflection

SMPTE 311M and 304M compliant

Stainless steel assemblies

Rubber dust caps

19.4 Mb/s to 3 Gb/s transport speed

Machine polished fiber contacts

Low insertion and return loss

Related Questions and Answers

Q: 1. can you power the new SMALLHD INDIE 7 monitor with this cable?

A: No you can not. You should use this to power the Indie 7 Monitor instead. SmallHD D-Tap to L-Series Dummy Battery Cable (32") BH #SMDTSLFB • MFR #PWR-ADP-SONYL-DTAP

Q: 2. Will this connect to the z cam e2 s6 to ride video mic pro?

A: No, the Tentacle Sync Tentacle to 5-Pin LEMO Cable is not intended for use to connect a microphone to the Z CAM E2-S6 Cinema Camera. It is designed to send a timecode signal from a Tentacle Sync timecode generator to any camera or recorder using a 5-pin male LEMO input. The Rode VideoMic Pro has a 3.5mm TRS output which can be connected directly to the camera's 3.5mm TRS mic input. The camera's 5-pin LEMO port is intended to be used for dual-channel XLR microphones and requires an additional XLR audio connector like the CAMVATE Dual 3-Pin XLR to Right-Angle 5-Pin LEMO Audio Cable for ALEXA Mini (B&H # CAC2723) or for single-channel, the CAMVATE 3-Pin XLR to Right-Angle 5-Pin LEMO Audio Cable for ALEXA Mini (B&H # CAC2722).

Q: 3. is compatible with arri2 2 pin conector?

A: Lemo ports on Letus Helix are reversed polarity from most equipment with Lemo connections. Not sure but Arri might also be reversed polarity.

Q: 4. will this work with the RED DSMC2 Production Module? (with 5-pin 0B Lemo connection for timecode)

A: Yes, the Tentacle Sync Tentacle to 5-Pin LEMO Cable is compatible for use with the timecode connections on the RED DIGITAL CINEMA DSMC2 Production Module.

Q: 5. Has anyone used this for AUdio? I have a 5pin lemo audio out on my camera and would like to connect this to my stereo mini jack

A: This cable, as stated, is designed for Timecode. HOWEVER, if the connections inside cable and inside your camera are wired the same, it may work.Its impossible to tell without knowing the camera wiring of its connector. I would contact your camera manufacturer.

Q: 6. Product description does not indicate if the 5 Pin Lemo is male or female. I would expect that it is Male?

A: Yes it is a male connector.

Q: 7. Does this work with Teradek Bolt?

A: The 2-pin LEMO works, but it's all contingent on where you are connecting it to and making sure that proper voltage is being sent through to avoid damage.

Q: 8. How long is this cable?

A: The manufacturer does not specify this information and since this is a brand new item, which we currently do not stock yet, we have no possibility of physically verifying this at this time.

Q: 9. How long is this cable?

A: The Tilta 2-Pin to 4-Pin LEMO Cable is 17cm in length.

Q: 10. this cable work with sound devices 633?

A: This will jam the sound devices 633 from the tentacle however it will not jam the tentacle from the 633 as it is only single direction

John	17/09/2024
[FXW] Solid cable! Great connections. Sometimes P-Tap are loose and janky, but this one clicks right in. My only comment is that the correct product was delivered, but it's not as-pictured. The LEMO connection is partially wrapped in bright red rubber, which is great and should add to the longevity of the cable, but it's worth noting that the product differs than the photo on B&H. 5

Benjamin	17/09/2024
[LEMO (SMPTE)] Great, but the price. The price is just stupid. It's so incredibly over priced for what it is. I'm certain this item won't fail me, but my god – the price for some cable. 5

Christian	13/08/2024
[FXW] As with many things Tilta makes, a decent quality and a competitive price. These cables are far more from other brands, so I use this to power smallHD monitors which works well. I wish the cable wasn't as long on the connection point - they protrude quite a lot, but they have worked well so far. 5

Ryan	11/08/2024
[FXW] It seems pretty good. No complaints. Its a well built cable 5

Jorge	11/07/2024
[2' / 0.6 m] It works. 5

Billy N.	14/06/2024
[LEMO (SMPTE)] Bought this for my Steadicam Flyer to mount RED batteries at the bottom of the sled and power everything up top. Does the job at a reasonable price. 5

Tin	04/06/2024
[LEMO (SMPTE)] No more cue tab and power adapter. Get this or get the 2 pin lemo - 2 pin lemo if your monitor have the output. 5

Victor	21/05/2024
[2' / 0.6 m] This short P-tap to lemo is prefect to connect the Bolt to our hand held director's monitor. (NOT COMPATIBLE WITH BARTECH) 5

James	17/05/2024
[2' / 0.6 m] Perfect solution instead of re-ending long fiber runs. Product is well made and works great. Make sure you match the fiber mode. 5