The Kopul XLRTWIST-360 is a right-angled XLR-male to XLR-female adapter for anyone who needs to route XLR cables safely away from walls or dividers. This angled XLR adapter can be rotated 360° to four different positions in the sleeve to save space behind a mixing board, recorder, or PA speakers and prevent cable strain, which can compromise connections and signal flow.

Quickly configure the male and female XLR connectors to face the proper direction for the angle you need to conserve space and protect your cables. Using an XLRTWIST-360 adapter on all your inputs and outputs will keep your cables organized and untangled. The adapter features solid metal construction for long-lasting and repeated use in demanding environments like studio or stage.

XLR Male to XLR Female Adapter    Right-Angle Shape    Adjustable Angle Direction Saves Space    Four Positions for 360° Rotation    For Recording & Sound Reinforcement    Durable All-Metal Construction    Tight Fitting for Solid Signal Transfer

This right-angle XLR adapter lets you rout cables away from walls and dividers, which will save space behind a mixer, recorder, or PA speakers.

Squeezing XLR cables between a mixer or recorder and a wall is a recipe for trouble with connections and signal flow. This adapter prevents strain at the cable's weakest point where the connector meets the cable, and it ensures that signals to and from mixers and recorders aren't interrupted.

Both male and female XLR connectors rotate 360° in the sleeve, and can be set to four different positions, so you can set the XLR connectors' directions at the angle you need for the easiest attachment.

This adapter is designed to protect your cables, so they're built to take some punishment. All-metal construction will withstand repeated use when you're setting up and breaking down recording or sound reinforcement systems.

Related Questions and Answers

Q: 1. I read a review of a similar adapter from Rode that says that it doesn't work with 1/8 TS cables. So, will this Kopul adapter work with a mono lav mic with 1/8 TS cable?

A: No. Neither works. They are both for STEREO 1/8 plugs into a MONO XLR jack. Period. (They will work if you only insert the mic plug halfway into the female 1/8 jack. No one in their right mind would try to use that fragile configuration. Get an XLR mic!

Q: 2. Overview states it turns a 100mm lens into a 1000mm spotting scope. Shouldn't it turn a 100mm lens into a 10mm spotting scope?

A: You need to divide the focal length of the lens by the focal length of the eye piece.100mm lens divided by 10mm eye piece = 10 mm spotting scope.600mm lens divided by 10 = 60 mm If yo add a 2X converter to the lens it would double the spotting scope magnification

Q: 3. The analog input to the AVIO 1, Does it need to be line level or can it receive audio from 25volt and 70 volt signal?

A: The Audinate Dante AVIO 1-Channel XLR Analog Output Adapter provides a balanced, line level analog output signal from the XLR male connector. So this adapter sends analog audio from a Dante network into an analog XLR input.

Q: 4. I assume this will work fine for I assume this can be used, with good effect, as a spotting scope at a shooting range to see where I hit while aiming. Any thoughts?

A: This product will work with a Nikon F mount lens. I use one myself with a 70-200mm

Q: 5. Would this be the correct adapter to add an intercom system to my Dante Network? I'm looking to integrate a Clear-Comm FSII Base

A: No, the Audinate Dante AVIO 2-Channel XLR Analog Output Adapter for Dante Audio Network would not be the correct adapter to use with your Clear-Comm FSII Base; it would work for output only. Instead, I would recommend using one B&H # AUADPDAOAU1 for output from the Dante system to the program input on your intercom base, and one B&H # AUADPDAIAU1 for the stage announce output of your intercom base into the Dante network.

Q: 6. can you monitor audio with audio out jack??

A: Yes you can use the audio out jack to monitor but you can't plug a headphone directly in the audio out jack and expect it to work as a headphone driver. The audio out jack is at microphone level and is matched to the microphone input on a DSLR camera. You would need an extra pre-amp to monitor the audio at line or headphone level from the audio out jack. However, the Saramonic BMCC-A01 has a dedicated headphone output with a volume control that works easily for audio monitoring of incoming signals. If you want to monitor incoming signals and audio playback from the camera when needed, then use the headphone jack on the camera as the place to plug in your headphones.

Q: 7. Will this fit a Nikon 6z mirrorless camera to capture photos from the spotting scope?

A: The Kenko Lens2scope Adapter for Nikon F Mount (Angled View), B&H # KELNFA, converts any Nikon F-mount lens into a spotting scope—it will not accommodate a camera body to capture photos.

Q: 8. Can you recommend a PoE injector to use with this adapter?

A: An injector such as B&H # UBUPOEAT would be suitable to use with the Audinate Dante AVIO 1-Channel XLR Analog Output Adapter for Dante Audio Network.

Q: 9. Is this good for target shooting spotting scope 50ft to 100 yards? Which lens mm works?

A: Yes, the Kenko Lens2scope Adapter for Nikon F Mount (Angled View), is good to create a target shooting spotting scope. the 200-500mm Nikon lens would be one of the best for 100 ft., or a 70-300mm one for 50 ft. https://bhpho.to/3VPMwHw https://bhpho.to/3VPMMX0

Q: 10. Does this provide phantom power to mics that require it?

A: 'No' ... it is strictly a passive unit!