This HPRC 4300 Hard Case Black | Durable Protectionhas a 23 x 12.6 x 12.2" interior capacity and is designed to protect contents from impacts, moisture, dirt, and corrosion. It has a lid handle for one-handed use with lighter loads, and two side handles to safely lift and carry heavier loads. The case is made from polypropylene, fiberglass, rubber, and stainless steel and is ATA 300, IP67, STANAG 4280, and DS 81-41 complaint. When closed, the interior is fully sealed to keep dust and water out. It is submersible to 3.3' and provides long-lasting resistance to wear-and-tear.

The ergonomic carry handles can be folded away to reduce the amount of space the case occupies. The case is securely closed with four double-hinged latches, and the base and lid are connected by a pair of heavy-duty hinges. 

Both the base and lid include a pair of shackle eyelets that align when the case is closed and two separately-available padlocks can then be used for enhanced security. A built-in valve automatically equalizes air pressure between the interior and exterior of the case. This keeps the case securely closed during air travel or when moving from areas of low altitude to high altitude.

Dust & Waterproof Case    Internior Case    Impact and Corrosion Resistant    Ergonomic, Fold-Away Carry Handles    Two Side Handles, One Lid Handle    Double-Hinge Latches, Padlock Compatible    Automatic Pressure Valve

Related Questions and Answers

Q: 1. What Leica M lenses can fit in the cut-outs?

A: After checking both websites, Leica and HPRC do not specify which lenses will fit.

Q: 2. Will this case accommodate an A7sII + Rokinon cine ds e mount 24, 35, 50, 85 and small hd focus 5?

A: it should work yes.

Q: 3. Will this work with sirui bct-3203 legs and bch-30 head

A: Yes, the HPRC 6400 Wheeled Hard Resin Case with Tripod Holder Kit (Black) is compatible with the Sirui BCT-3203 Carbon Fiber Tripod & BCH-30 Video Head Bundle.

Q: 4. Would this fit a Sachtler FSB 8 with Flowtech 75 legs?

A: The HPRC 6400TRIB Wheeled Hard Case for Tripods with Soft Interiors Kit (Black) (B&H# HP6400WTRIB) can fit the Sachtler System FSB 8 Fluid Head with Touch & Go Plate, Flowtech 75 Carbon Fiber Tripod with Mid-Level Spreader and Rubber Feet (B&H# SA0765) if the panning arm is removed from the head.

Q: 5. How many Avenger 5034 wheeled stands plus boom extensions can this hold?

A: One Avenger 5034 stand would fit in the HPRC 6500 Wheeled Hard Resin Case with Tripod Holder Kit (Black).

Q: 6. How deep are the lens sections? Would it fit a telephoto like Canon 70-300 or 70-200?

A: This case is not for your gear. This is custom fit for a mirrorless camera and its small lenses. The interior of the case allows about a 5 high piece of gear. The Canon 70-200mm's are 6.77 to 7.83 in length. They would only fit lying flat. That would defeat the purpose of the custom cut foam.

Q: 7. Hi, I have the sony 20-70gm2 and 70-200 gm2. They could be fitted in this foam?

A: The Sony FE 24-70mm f/2.8 GM II Lens (Sony E) B&H # SO247028GM2 will fit but the Sony FE 70-200mm f/2.8 GM OSS II Lens B&H # SO70200282GM is too large for the foam cutouts.

Q: 8. Will this case accommodate an a7rIV and 70-200mm zoom?

A: Hi, you could fit the A7R IV and the 70-200mm lens in this case, but you would need to remove or reconfigure the foam protective insert.

Q: 9. Is there a strap accessory that would work on this case?

A: You could use the Pelican Padded Shoulder Strap, BH # PEPSS https://bhpho.to/2WG196J

Q: 10. I have a Sunpak PRO423PX Tripod with a pistol grip. Will the 4300 fit as a replacement head? What else would I need.

A: Yes, this head will fit on your 423PX, no additional hardware needed.