Equally intended for producers, studio engineers, and hobby musicians, the white Glorious Workbench Work Console Whiteis a work console designed to improve comfort and productivity in home- and studio-project settings. The stylish, solid-wood construction is robust, and assembling/disassembling can be carried out easily and in no time.

The pull-out drawer is convenient for placing a master keyboard on top. When no longer required, the drawer can easily be pushed back, facilitating a comfortable workflow for the computer keyboard and mouse. Use the elevated second level to place large TFT displays. On the left and right sides of this monitor space, there are two revolving trays for studio monitor speakers. You can rotate the trays to find the optimal position for your speakers.

The two 4 RU rack slots on the main table area allow 19" devices such as compressors, equalizers, mixers, amplifiers, and effects to be mounted ergonomically. There is also enough space for headphones, DVDs, books, or accessories to be stored while remaining within reach. A series of conveniently placed ducts allow for simple and clean cable routing.

For Home and Studio Projects    Easy and Trouble-Free Assembly    Sturdy Wood Construction    Pull-Out Drawer for Keyboards    Revolving Trays for Monitor Speakers    Two 4 RU 19'' racks    Second Level for Large Displays    Space for CDs, DVDs, Books,    Ducts for Cable Routing

• Sturdy wood construction, white finish
• Easily assembled, conveniently stored
• Pull-out drawer for keyboards
• Two 4 RU 19" racks
• Space for CDs, DVDs, books, and more
• Ducts for cable routing
• Enough space for a computer keyboard, mouse, studio mixer, and other equipment
• Second level for large displays
• Convenient, removable, and revolving trays for monitor speakers

• Middle monitor area: 110 lb
• Single speaker tray: 22 lb
• Keyboard tray: 27.5 lb
• Main table area: 88 lb

Related Questions and Answers

Q: 1. Is the Loupedeck+ compatible with Adobe Camera Raw?

A: Not currently, but additional software compatibility is being added all the time.

Q: 2. Is the Dugan Automixer still included on 8channels?

A: Yes it does: How the AUTOMIXER works: The TF series AUTOMIXER uses the Dugan speech system, which automatically adjusts the gain of up to 8 mics. Unlike limiters or auto-level controllers, the Dugan speech system lets the engineer control individual levels as usual, even when more than one person is talking at the same time. Also, the audio on the mics is detected and the gain is automatically distributed when no one is talking, so the faders can be left up When one person talks, the gain on that mic instantly rises, and the gain on other mics is lowered. This works the same when another person speaks. When two people talk at the same time, the gain between the two mics is automatically distributed to provide a uniform total gain, and the gain on the remaining mic is lowered. NOTE: • The AUTOMIXER is placed directly after the channel ON for CH1–CH8. • When the Pre button for SEND TO AUX on CH1–CH8 is off, signal is sent from directly after the AUTOMIXER to the AUX bus. • When CH1–CH8 are stereo linked together, the AUTOMIXER parameters will not be linked.

Q: 3. Is this include Nuendo Live licence?

A: Yes, the TF3 mixer includes a Nuendo Live licence.

Q: 4. Which CaptureOne functions are supported?

A: There is a Basic User Guide on the Setup Page of Loupedeck wbsiteThis should give you all the information you need. Further integration will follow later.

Q: 5. Can you install and use third party plugins with this desk?

A: Whatever is compatible with your DAW. More specifically plug-ins supported by ASIO, Core Audio, or WDM standards

Q: 6. Does this come with the laptop board and the drawer or just the case?

A: Its just the case. You would need to buy other rack accessories such as a laptop tray, drawer, or shelves separately.

Q: 7. Is an accessory kit needed in order to rack mount this mixer?

A: Yes there is a rack mount kit. You can find it on the B&H website with this part number BH #YARK5014.

Q: 8. Is this compatible with Camerabits' PHOTEMECHANIC?

A: This currently does not officially support Photo Mechanic.

Q: 9. Can the buttons and dials be customized to (for example) work with Final Cut Pro?

A: No, it does not appear so. The fact that they have explicitly laid out what apps will be supported, as well as which dials/buttons will be customizable and which will not (most of them will not), suggests they have these directly linked to specific app functions.

Q: 10. Is this the updated version compatible with Lightroom CC? Or is that achieved through software or firmware update?

A: This version does show compatibility with Lightroom CC: Adobe Lightroom 7.4 or later, Adobe Lightroom 6, Adobe Photoshop CC, Adobe Premiere CC, Skylum Aurora HDR, and Beta integration with Capture One (additional photo editing software compatibility under development)