The Camplex Duplex LC Single-Mode Fiber Optic Tactical Snake Reel comes in a 2000' reel, and is a ruggedized multichannel fiber optic cable designed for multiple field production deployments in outside broadcast, rental houses, and more. It is a highly flexible, tight-buffered tactical cable with internal aramid strength members for crush resistance in high-traffic areas (if handled properly), with a polyurethane outer sheath designed to withstand crushing by both military tanks and broadcast vehicles. All assemblies are multi-stage machine polished and tested for <0.55 dB RL, with test results for each channel supplied with the cable.

This fiber optic tactical snake cable includes the Schill cable reel with connector protection cavity and hinged latching door. The Schill reel has been carefully selected to ensure the proper support and critical bend radius required by fiber optic cables.

Built with OCC multichannel tactical cable and heavy-duty connectors with dust caps

Individual channels ruggedized with Techflex protection and 24" fanout

Compact, round cable design for ease of transportation and deployment

Designed for use in adverse environments where reduced size and weight are important

Helically stranded cable core for flexibility, deployment survivability, and mechanical protection of the optical fibers

Cable has been tested and is suitable for use in military data communications applications

Can be used outdoors for temporary deployment directly on the ground in all terrains, including severe environments

Suitable for outside broadcast, industrial, mining, and petrochemical environments (chemical-resistant)

Crush-resistant and resilient, with a thick layer of aramid strength members

Polyurethane-jacketed for abrasion, cut, and chemical resistance

Meets MIL-PRF-85045 specifications

Related Questions and Answers

Q: 1. Does this work for 1080i as well?

A: Yes it should. This supports up to 1080p60, it should handle 1080i fine as well.

Q: 2. Is there a delay with this model?

A: There is always a slight delay when using extenders such as the Shinybow SB-6531KIT 4K HDMI over Fiber Optic Cable Extender Kit. However, it's such a little delay that it is not noticeable.

Q: 3. What are the size of connection at the top and at the bottom?

A: The Novoflex QuadroLeg 3-Section Carbon Fiber Leg (Single)'s top thread connection size is 1/4"; the bottom foot thread size is 3/8".

Q: 4. Could this be used to daisy chain a Thunderbolt 3 monitor?

A: As long as the monitor does not need the power to be transmitted via the cable then it should be fine.

Q: 5. With the SDI feed, will this carry 4 channels of embedded audio?

A: The Lynx Technik AG yellobrik OTR 1810 transports the complete SDI payload, which includes up to 16 channels (8 AES) of embedded audio.

Q: 6. I'm new to fiber, (running Dante / audio). I have 492' of cable. It's difficult to over/under wrap, very small cable (armored). A reel sounds great but does OM3 work wound this narrow? I just want my data to pass :-). Thanks!

A: Yes, the JackReel-F4 High Performance Fiber Optic Ready Cable Reel would be able to work with OM3 fiber cable. the Reel holds up to 500 feet of 2-Channel and 4-Channel tactical fiber. Fiber ready hub maintains the critical bend radius necessary for fiber optical cables.

Q: 7. ? can this transceiver use OM3 multimode

A: Yes, the HPE Networking Instant On 1G Multi-Mode LC SFP Transceiver uses OM3/OM4 LC or MPO (8,12,16) Cabling.

Q: 8. I have a saramonic witalk6s that includes a hub. Can i connect the remotes to this one?

A: The Saramonic WiTalk-SMH Full-Duplex Wireless Intercom Single-Ear Master Headset (1.9 GHz) can be added to any system that includes the Saramonic WiTalk-Hub Base Station (1.9 GHz).

Q: 9. Does this carry both Video Signal and Power? I'm a bit confused between single mode and multi-mode. I Have to make sure which one use FieldCast Power Panel One (XLR for Power and Fiber for Data)

A: Please write us at provideo@bhphoto.com.

Q: 10. Has anyone successfully paired new remote headsets with an existing system? Even after updating the firmware of my master headset and existing original remote units, the new headsets still won't pair... Really disappointed with Hollyland support as troubleshooting documentation is inaccurate.

A: Hi, please try to reset the headset as the link show. hope it will solve your problem. https://hollyland-techhelp.zendesk.com/hc/en-us/articles/7181637491347-New-remote-headset-can-not-pair-to-master-headset-for-US-SolidCom-C1-without-Hub