Ubiquiti Single-Mode Lc Sfp Transceiver Kit (2-Pack)

Ubiquiti Single-mode Lc Sfp Transceiver Kit (2-pack)

Product Code: eq105316
Availability: In Stock

$74.97 $107.21

Qty

11 reviews Write a review

Description
Reviews (11)

Enjoy reliable bandwidth with your fiber installations with the Ubiquiti Single-Mode LC SFP Transceiver Kit (2-Pack)from Ubiquiti Networks. This 2-pack kit includes complementary SFP modules with simplex LC connectors. The module with the blue latch features a 1310 nm transmit and 1550 nm receive wavelength while the yellow latched module has a reverse configuration. Working together, the modules have a bi-directional data transfer rate of up to 1.25 Gb/s with a range of about 1.9 miles over a Single-Mode fiber connection.

Simplex LC Connector Up to 1.25 Gb/s Throughput 1310 nm TX / 1550 nm RX (Blue) 1550 nm TX / 1310 nm RX (Yellow) LC Connectors Single-Mode Fiber Up to 1.9 Mile Range

Key Specs
Form Factor	SFP
I/O	1x LC
Maximum Data Rate	1.25 Gb/s
Mode	Single-Mode
Parameters
I/O	1x LC
Wavelength	1310 to 1550 nm
Maximum Networking Distance	1.9 Miles / 3 km
Maximum Data Rate	1.25 Gb/s
Mode	Single-Mode
Power Consumption	0.66 W
Operating Conditions	32 to 102°F / 0 to 70°C
Packaging Info
Package Weight	0.14 lb
Box Dimensions (LxWxH)	4.1 x 2.95 x 0.8"

Related Questions and Answers

Q: 1. Can I use this to connect my Synology Raid to 10 GB with two workstations? Then also run it (from this unit) to a wireless router for the rest of the building?

A: The Ubiquiti Networks EdgeRouter Infinity ER-8-XG 8-Port 10G SFP+ Router is a router itself. I would need more information about your setup to give you a better answer. (for example, is It only a raid system or a NAS or you are talking about an access point instead of a router?) Thank you!

Q: 2. can you plug the included power adapter into the SFP port?

A: No, only Ethernet.

Q: 3. What side is up and what is the plastic tab for? I don't feel a positive click with either the label up or down.

A: The Ubiquiti Networks UniFi 10G SFP+ Direct Attach Cable (3.3') should be connected so that the contacts of the SFP+ connectors make contact with the contacts of the host plug. The plastic tabs are there to assist with remove of the connectors.

Q: 4. can I use this as a auto focus assist only with my camera in aprature priority mode or will I have to use the camera in manual mode with it?

A: As you keep pressed the test button, the camera will operate just as if you were holding shutter button, making the focus if you are in autofocus. When you release the button the photo is taken.

Q: 5. Can Each port functions as an independent interface VLAN ?

A: The Ubiquiti Networks ER-X-SFP EdgeRouter X's VLAN-aware switch feature allows the EdgeRouter to tag and untag VLANs on different switch-ports. This is done by grouping the Ethernet ports under the switch0 interface and adding the VLAN values to the switch-ports. More information can be found here: https://bit.ly/4bj0BFT

Q: 6. I need a OCF setup but never used this brand. I need a pass through transmitter and two receivers for wedding receptions. Do these have such a thing?

A: Zach,I'm not familiar with the term OCF . I have used the YN622N along with the TX622N on my camera to fire my old SB28 flash and I have used one of the YN622N's to fire the camera and the flash remotely. I have had no trouble in my testing of these units and I am considering buying a Yungno flash as well to supplement my SB28. To date, I am very satisfied with the YN622N.

Q: 7. Please answer question 2 by identifying compatible optical cables for this module. BH #UBACDASFP103?

A: The Ubiquiti Networks UACC-OM-MM-10G-D 10G SFP+ Multi-Mode Optical Module (2-Pack) uses multimode LC fiber optic cables, like the Ubiquiti Networks Multimode LC Fiber Optic Patch Cable (9.8', Aqua), B&H # UBUOC3.

Q: 8. Is this bi-directional? I want to connect a MAC monitor to a MAC pro that's 100 feet away. Will I need two of these? One on the MAC Pro and one at the MAC monitor?

A: No, this is not bi-directional. The purpose of the Sonnet Solo10G SFP+ Thunderbolt 3 to 10 Gigabit Ethernet Fanless Adapter with Short-Range SFP+ Transceiver connects to computers to a 10Gbp/s Network via Thunderbolt. Now as far as connecting you Mac Po to your Mac monitor that is 100 feet away, you may want to look into a video extender kit.

Q: 9. Will these work to and from a Yongnuo YN-622N-TX i-TTL Wireless Flash Controller and a Nikon SB-900?

A: Yes, if you connect the Nikon SB-900 Speedlight Flash to the Yongnuo i-TTL Transceiver YN622N for Nikon Cameras, the Yongnuo YN-622N-TX i-TTL Wireless Flash Controller will wirelessly trigger the Nikon SB-900 Speedlight Flash.

Q: 10. Can I use the 48v power injector from Ubiquiti? My antenna needs 48v

A: Yes, you can use the 48v power injector from Ubiquiti?

Tim	22/09/2024
[0.66 W] We use this to get audio/video to the front and back of large conference rooms, works great. The cable is only as thick as a single regular XLR cable. 5

Rishi	12/09/2024
[Single-Mode] simple and works well 5

Joseph	06/09/2024
[0.14 lb] We purchased 14 of these to round out our network migration. All working well. We are upgrading our backbone network to 10GB. Pretty good for a Church, huh!! 5

Grant	23/08/2024
[1x LC] I have purchased 1 set of these to replace coax SDI lines we needed to remove in favor of fiber. So far my initial tests are good. We are just using it for HD-SDI, but If they continue to work, I will purchase another set and this will give us 6 transmit and 6 receive signals on each end of our link using 4 strands of single mode fiber. They are virtually silent except a small fan on the side and use locking screw on power cables which is nice to prevent loss of power from a connector getting pulled out. Also they are VERY small and compact. We will use heavy duty Velcro to hold them on a rack shelf long term. You can't beat that capacity for the price. 5

William	16/08/2024
[SFP] Really, there's not much you can say other than I plugged each into an SFP port and they work absolutely perfectly. These are especially useful in a situation like mine where one end is a media converter and the other is a Ubiquiti router with an SFP port (EdgeRouter 4.) It works as you would expect with no discernible speed penalty compared to just a straight Gigabit Ethernet cable. I installed mine to provide galvanic isolation between my cable modem and my home network so I need not worry about lightning strikes on my coaxial cable. Highly recommended and you cannot beat the price. 5

Jeffrey	05/07/2024
[1.25 Gb/s] What a great value! And great quality! The only negative is I wish there was some support for the dangling connectors while installing. 5

Robert	28/05/2024
[1x LC] 6 strand LC cable works well. Very flexible and is weatherproof. However this is NOT tactical cable don't roll any tanks over it! Works well with LC couplers, I have joined 3 together with no issues. Cable comes coiled very small. I laid it out in the sun for a few hours and removed most of the cable's coil memory. 5

Jim	02/05/2024
[0.66 W] I ordered two 2-packs of these Transceivers and I just plugged these into my Ubiquiti Switches (Aggregation/POE 24 port) and these just worked. They were enclosed in a strong plastic package and arrived on time. 5

Philip	25/04/2024
[Single-Mode] I like that it has enough fibers for pretty much any application, works well! 5

Kohei	21/04/2024
[1310 to 1550 nm] This is currently the lowest price 12G SDI Video SFP. Used in BlackmagicDesign's Optical fiber 12G. Combined with ARIB or SMPTE camera cable, CAM and RET transmission equipment can be made. Excellent! 5