The Plugable 7-Port USB 3.0 Hub | High-Speed Connectivityexpands USB connectivity by enabling up to seven USB 3.0/3.1 Gen 1, 2.0 and 1.1 devices to be added to any USB-A 3.0/3.1 Gen 1 or 2.0 port on a desktop, laptop, or tablet computer. Supporting standard USB 3.0/3.1 Gen 1 transfer rates up to 5 Gb/s, this hub allows data to move quickly between devices, and is ideal for high-throughput accessories such as USB external hard drives, flash drives, and USB graphics adapters. A 36W AC adapter is included. The matte finish resists fingerprints, while a physical on/off switch allows for easy power control.

5 x 0.9A USB-A Ports    2 x 1.5A USB-A Ports    USB-A Host Connector    36W AC Adapter

Seven USB-A ports are lined up front-and-center for easy access, with the power connection and host USB cable facing rearward to reduce cable clutter. Per-port LED status lights on the top of the hub indicate a successful connection between the device and the host computer.

In addition to standard data transfer and sync, this hub provides extra power on each port. Five ports deliver 0.9A at 5V for 4.5W of power. Two ports deliver 1.5A at 5V for 7.5W of power; special charging signals enable supporting devices to charge at a much faster rate.

This hub features the VIA VL813 USB 3.0 hub chipset updated to firmware version 9015 for maximum compatibility with almost all USB 3.0/3.1 Gen 1 hosts. It allows for full forward and backward compatibility between USB 3.0/3.1 Gen 1, 2.0, and 1.1 hosts and devices. This chipset is a 4th generation solution which emphasizes high performance and high power efficiency.

The hub itself requires no driver installation, but attached devices may require drivers. Support operating systems include Microsoft Windows XP and later, macOS, and Linux kernels 3.0 and later. Installing the latest USB 3.0 xHCI host controller drivers is recommended. This hub is not recommended for use with older Texas Instruments, Fresco Logic, Etron, or Wistron USB 3.0 host controllers. Please note, older Mac Pros with USB 3.0 PCI Express add-on cards may not work with this hub. The Apple SuperDrive is not compatible with this hub. Furthermore, 2.4 GHz wireless devices such as keyboard and mouse receivers and Bluetooth and Wi-Fi adapters may not work in close proximity to USB 3.0 devices or hubs.

Related Questions and Answers

Q: 1. Can I use this to plug in and power up higher power hungry devices like Iphone5s, laptop or ipad?

A: I can't see how you'd charge a laptop with usb at all. But it certainly does charge most regular usb chargeable devices like iPhones and iPads.

Q: 2. Would I be able to plug in a USB Microphone (RODE NT-USB) directly into this HUB and use it?

A: Yes, you can connect any USB device to the USB hub.

Q: 3. Hello, Does this device handle both 110 and 220 Voltage? Thank You.

A: For best results, the Sabrent 7-Port USB 3.0 Hub should be used with a voltage converter.

Q: 4. If I plug this into a USB 2.0 port on laptop, will it safely provide full required power to a USB 3.0 device using the AC adapter, while still allowing the device to communicate/sync/etc (at USB 2.0 speed) with the laptop?

A: Yes. The hub will work just fine with your USB 2.0 notebook and USB 3.0 device. There also would not be any issue with the power.

Q: 5. will this device allow me to use my apple superdrive?

A: The Plugable 7-in-1 USB Type-A & Type-C Hub, B&H # PLUSBCHUB7BC, does not support the Apple Superdrive. The Apple Superdrive needs to be connected directly to the computer in order to work properly. If you do not have a computer with USB A, you can use an adapter like the Pearstone USB 3.2 Type-C to USB Type-A Adapter (6"), B&H # PEUSB323CA06.

Q: 6. Does this bus power external hard drives via USB?

A: In my experience no.

Q: 7. how long is the usb cable?

A: 14 inches.

Q: 8. is the 18W DC Power Adapter 110v or 240v type?

A: This usb 3.0 hub comes supplied with a power adapter that takes an input of 110-240v, 50-60Hz. It has a North American two prong plug.

Q: 9. If I switch off power to a port does that also turn off data transmission through that port?

A: That is correct. It will turn it off.

Q: 10. Hello, what is the size of the DC jack included? What is the input voltage which this power adapter has?

A: The voltage will be 100-240. As for the size of the DC plug, Sabrent recommends 12V 5 amp power supply. Sabrent recommends that you reach out to them directly for a replacement supply.