Add a classic 3-band EQ effect to your tracks with the Nomad Blue Tubes Equalizer PEQ5B, an EQ plug-in designed with the characteristics of vintage analog hardware. The EQ features 3 parametric bands with center frequency, bandwidth-Q, and amplitude controls as well as low-shelf and high-shelf filters. The output stage offers a simple peak limiter. Ideal for both tracking and mixing applications, Equalizer PEQ5B is more open and musical than equalizers of the same type, adding a warm tone and character to your music.

Classic 3-Band Equalizer    3-Bands Parametric Equalization    2-Band Shelving Equalization    15 dB of Gain and Variable Q per Band    Peak Limiter Control    Easy-to-Use Vintage Interface    Full Automation for All Parameters    Mac OSX/Windows, AAX, AU, RTAS, VST

• 2 bands of shelving equalization
• 3 bands of parametric equalization
• LF band variable from 30 to 450 Hz (low-shelf)
• LMF band variable from 200 Hz to 2.5 kHz (low-mid parametric)
• LM band variable from 400 Hz to 5.5 kHz (mid-parametric)
• HMF band variable from 600 Hz to 7.5 kHz (high-mid parametric)
• HF band variable from 1 to 20 kHz (high-shelf)
• HPF variable from 20 to 80 Hz
• LPF variable from 10 to 18 kHz
• Each band offers 15 dB of gain and variable-bandwidth Q
• EQ bypass on each band
• Simple peak limiter control
• Input and output level control, 24 dB trim
• Easy-to-use vintage interface with VU meter
• Full automation for all parameters
• Authorize up to 3 computers

Related Questions and Answers

Q: 1. Are these automatic or only manual?

A: These extension tubes have electronic contacts that maintain full autofocus and auto-exposure functionality for seamless use.

Q: 2. Does this work with a 4'x6' Sun-Swatter? The size of the pole is 22mm.

A: Yes this can work with the Sunbounce 4 x 6 Sun Swatter.

Q: 3. How many amps does this product use when plugged in?

A: As per the manufacturer, the unit will draw 0.9 amps for about 100 watts when plugged into an AC outlet.

Q: 4. Can I assemble two sets of two extension tubes, for a total of four, and attach the new 105mm Z micro lens to them? Would this result in approximately 1.58 magnification given the lens is 1:1?

A: Unfortunately, this set up has not been tested in this manner so the results may vary.

Q: 5. Do these extension tubes come with end-caps, and possibly a soft case?

A: These tubes come with caps.

Q: 6. Will this hold Amaran PT4C?

A: Yes, the Matthews MQ Mount for LED and Fluorescent Light Tubes is compatible with the Amaran PT4C.

Q: 7. Would these work on an EOS R with the EF-R adapter using an EF lens?

A: Yes, an EF lens on the R adapter will work with these extension tubes with full electronic communication.

Q: 8. Would inserting one of these (or any tele converter) between the RF 100-500 lens and the RF 1.4X (or 2.0) tele extender, allow the lens to extend BELOW 300 mm? If so, would the lens then NOT be able to focus to infinity? Thanks.

A: Teleconverters and extension tubes have different usages and are not often used simultaneously. A teleconverter is is designed to increase the focal length of a lens by the multiplication factor listed on the teleconverter, giving you additional reach to your subject. Extension tubes are designed for macro photography, and are designed to reduce the minimum focus distance of your lens while increasing magnification, and also eliminate the ability to focus at infinity or use the lens for normal shooting. Hypothetically, using a teleconverter and an extension tube simultaneously with a telephoto lens would reduce the lens' would allow you to focus closer than the lens' listed 2.95 feet (90 cm) minimum focus distance, and would also prevent you from focusing at infinity, essentially making it a long macro lens. Unfortunately, as this is an unorthodox setup, and as the Canon Extender RF 1.4x and the Canon Extender RF 2x is designed to connect directly to the lens (the optical element on the teleconverter is designed to sit inside the rear of the lens for optimum optical performance), I cannot state if the setup you describe would work, nor if the lens would focus properly with the teleconverter's optical element out of its designed alignment inside the lens, and this would not be something we could test.

Q: 9. how much do these weigh?

A: The total weight of this Meike MK-RF-AF1 13mm and 18mm Extension Tubes for Canon RF would be 2.5 oz. The 18mm Extension Tube would be 1.4 oz, and the 13mm would be 1.1 oz.

Q: 10. Hi there! Do these tubes have gaskets? Will my Z6 still be weather sealed using these tubes with the Nikkor Z 24-70 2.8? Thanks!

A: No, these tubes are not weather sealed.