The Laird 24" Power Cable from TecNec features 2-pin LEMO connector at one end and 4-pin XLR male connector at the other. This cable can be used to power many Teradek devices.

Laird equivalent for Teradek BIT-318 cables

For the Bond cellular transmitter

Related Questions and Answers

Q: 1. would this power the Digital Bolex?

A: Yes, The CAMVATE Coiled D-Tap Male to 4-Pin XLR will be able to connect and power the Digital Bolex cinema camera.

Q: 2. Will this work with the Beachtek DXA-PRE Two-Channel Preamplifier for Cinema Cameras?

A: While the AndyCine cable may work, we only recommend the following cable for the Beachtek DXA-PRE. Beachtek BT-PWR D-Tap to 2-Pin LEMO Power Cable for DXA-ALEXA / DXA-CINE BH #BEBTPWR

Q: 3. Are all 4 pins wired?

A: NO! The wire is 2 conductor, and only pins 1 & 4 are connected. Does not work as power/control cable for TigerTilt pan-tilt head. Disappointing!

Q: 4. Can this conduct 12v power?

A: Hi Ryan,Happy to answer your question; and the answer is, yes.I use this cable to bring power from my Anton Bauer batteries into my Panny GH4 with the YAGH attachment

Q: 5. Will this work with a smallhd cine 7?

A: Yes, this cable will work with a SmallHD Cine 7 Monitor.

Q: 6. Are all 4 pins wired?

A: Pinout of 4-pin XLR connector used for 12V powerThe 4 pin male XLR connector is found on nearly all professional location video equipment. It is used for an external 12 volt DC input. Pinout: pin 1 = negative pin 4 = positiveNo connections are made to either pin 2 or 3. NOTE: Check and double check that the wiring is correct to your equipment before connecting this to any expensive video gear. Mistakes can be costly to you.

Q: 7. Has anyone tried to use this to power a Nucleus M motor, which uses a 7 pin connection?

A: No. This cable will not work with the Nucleus M... It's a tricky thing with lemo when the manufacturer does not specify the polarity of the pins, but when unspecified, although it's a 7-pin connector, it can be of Arri polarity-which is the opposite of Normal or U.S. Standard orientation. For a more detailed breakdown you may reference this quick article: https://bit.ly/2SJ71Y6

Q: 8. Can this extend the cable length from a Core SWX SPU-4 Compact Power Supply?

A: NO you can Not extend it, you will need to obtain a longer cable

Q: 9. Will this work with the Ikan Bolt 600?

A: Yes, the 2-pin lemo will work for powering the IKAN Bolt 600.

Q: 10. I meses at cable XLR 5pin male to XLR 4 pin female

A: This cable is 4 pin male to 4 pin female. Connected straight through. Can be used for power.