The Camplex 12-Channel ST Single-Mode Fiber Tactical Snake comes in a reel of 750'. It is a ruggedized multi-channel fiber optic cable designed for multiple deployments for field production in outside broadcast, rental houses, and more. It is a highly flexible tight-buffered tactical cable with internal aramid strength members for crush resistance in high-traffic areas (if handled properly) and a polyurethane outer sheath designed to withstand crushing by both military tanks and outside broadcast vehicles. All assemblies are multi-stage machine polished and tested for <0.55 dB RL with test results for each channel supplied with each cable.

The Tactical Fiber Snake Reel includes Schill fiber optic cable reels with connector protection cavity and hinged latching door. The Schill reel has been carefully selected to ensure proper support and critical bend radius required by fiber optic cables.

Built with OCC multichannel tactical cable & heavy-duty connectors with dust caps

Individual channels ruggedized with Techflex protection & 24" fanout

Compact, round cable design for ease of transportation and deployment

Designed for use in adverse environments where reduced size and weight are important

Helically stranded cable core for flexibility, deployment survivability, and mechanical protection of the optical fibers

Cable has been tested and is suitable for use in military data communications applications

Can be used outdoors for temporary deployment directly on the ground in all terrains, including severe environments

Suitable for outside broadcast, industrial, mining, and petrochemical environments (chemical resistant)

Crush-resistant and resilient with a thick layer of aramid strength members

Polyurethane jacketed for abrasion, cut, and chemical resistance

Meets MIL-PRF-85045 specifications

Related Questions and Answers

Q: 1. Is Aux 2 pre or post fader?

A: Aux 2 is post fader. Aux 1 is switchable pre/post

Q: 2. Any idea how much amplification is added to the signal?

A: AKG lists the nominal output as 680 mW per channel into 32 Ohms.

Q: 3. The interior dimension of the bag appear to be smaller than the size of mixer. Does the bag fit?

A: Yes the bag fits the mixer. Forced perspective can be deceiving.

Q: 4. Will this work with a Chauvet DJ DMX-4LED 4-Channel Dimmer Pack?

A: Yes. If the lights you own do not have built-in DMX, then you may use the CHAUVET DJ DMX-4LED 4-Channel Dimmer Pack with the Elation Professional SDC12 12-Channel Basic DMX Controller for your usage needs, allowing you to adjust the light output from the ground.

Q: 5. How many inputs will be available on my DAW when using the USB function?

A: This mixer has just 4 USB out channels, which is basically two stereo pair. If you are recording a small ensemble or solo artist this may be ok, but it is really not intended to be a full fledged multi-channel interface, rather a live board with the ability to record a live mix, or stream. If you are interested in something that might be good in both a live situation where you need a lot of inputs an routing capabilities, yet wish to record tracks to your DAW, consider the Tascam Model 12. It is a hybrid 12/10 io USB interface built in to a nice 12-channel live board. https://www.bhphotovideo.com/c/product/1539340-REG/tascam_model_12_mixer_intrfc_recordr_controlr.html

Q: 6. Is the USB output of this board in stereo? The USB output of the v2 was mono mix

A: According to Mackie's specifications, the integrated 2x4 USB audio interface for ProFXv3 series mixers provides USB 2.0 format, A/D/A 24-bit at 44.1, 48, 96 or 192 kHz with one stereo input and two stereo outputs. The ProFXv2 series mixers have an integrated 2x2 USB audio interface that is USB 1.1 format, A/D/A 16-bit at 44.1 or 48 kHz with one stereo input and one stereo output.

Q: 7. Will this amp work with Bose Virtually Invisible 191 Speakers? Some list this speaker at 6 ohm's. The spec for this amp list 4 or 8 ohm's not 6.

A: Yes, this would be compatible. Bose lists the specs of the Virtually Invisible 191 speakers as 100w @ 8 ohms, but this amplifier would be compatible with speaker that are 4 - 8 ohms.

Q: 8. Are these rails strong enough to support an external battery pack?

A: The SmallRig 15mm Carbon Fiber Rod Set would be strong enough to support external batteries. However, I would consider Aluminum Rods that will provide extra strength. SmallRig 15mm Aluminum Rod https://bhpho.to/3eC0vNr

Q: 9. Will this unit drive a 250 ohm headphone with enough power to where I dont feel like I need a higher power amp?

A: This is a professional, studio- quality headphone amplifier that is compatible with low and high impedance headphones, and will have the power to handle 250 Ohm headphones.

Q: 10. Will this work with the Litepanels DMX module? I'm planning on using two Astras in a studio grid setting.

A: Yes it will work with the 5 pin DMX512