Jjc 6-Filter Kit For Dji Mavic Pro

Jjc 6-filter Kit For Dji Mavic Pro - Camera Accessories

Product Code: eq107634
Availability: In Stock

$209.85 $256.02

Qty

20 reviews Write a review

Description
Reviews (20)

Save yourself editing time by controlling the look of your footage as you film it with this JJC 6-Filter Kit for DJI Mavic Pro - Camera Accessoriesfrom JJC. The kit includes six of the most essential camera filters a pilot could use: UV, CPL, ND8, ND16, ND32, and ND64. The UV filter provides up to 99.5% light transmission and has a multilayer coating to reduce unwanted reflections. This means you can use it for regular shooting, and your gimbal will enjoy both physical and UV light protection. The CPL filter has up to 99.8% polarization to reduce reflections from nonmetallic surfaces, such as water and glass. The ND8-64 filters reduce the light by 3-6 stops, allowing you to control exposure and deal with varying degrees of sunlight.

For DJI Mavic Pro UV, CPL, ND8, ND16, ND32 & ND64 Filters UV Has 99.5% Light Transmission Control Exposure with ND Filters ND Filters Reduce Light by 3-6 Stops CPL Reduces Reflection with Polarization CPL Has up to 99.8% Polarization Multilayer Coating on UV Filter

Parameters
Stops	3-6
Light Transmission	UV: Up to 99.5%
Polarization	CPL: Up to 99.8%
Construction Material	Glass & Aluminum
Dimensions	0.9 x 0.3" / 22 x 7 mm
Weight	0.2 oz / 6 g

Related Questions and Answers

Q: 1. Is the 4/3” sensor in the hasselblad camera the same one as in the original Mavic 3 or is it updated?

A: The 4/3” sensor in the DJI Mavic 3 Pro Drone with DJI RC has the same specs as the original DJI Mavic 3.

Q: 2. are all the automated modes (active track, Pont of Interest, etc...???) supported while in Pro Res recording mode?

A: FocusTrack cannot be used on the DJI Mavic 3 Pro Cine Drone when recording in any resolution of Apple ProRes 422HQ/422/422LT, resolutions of 5.1K and above, and 120fps and above.

Q: 3. are the ND filters included with this drone?

A: Yes, included with the DJI Mavic 3 Pro Cine Drone with Hard Case & 128GB microSD Card Kit is the DJI ND Filter Kit for Mavic 3 Pro/Pro Cine, BH #DJMAVIC3PNDF.

Q: 4. What are the third camera specs? Does it shoot in raw?

A: The third lens on the DJI Mavic 3 Pro Drone with DJI RC is a 1/1.3″ CMOS sensor, with an effective 48 megapixels. It provides a field of view of 35°. It has a full-format equivalent of 70mm with an aperture of f/2.8 and has a minimum focus of 3 meters. The third lens can capture raw images.

Q: 5. Do it support 1Tb Sandisk UHS-II micro SD?

A: Yes, a 1TB MicroSD card can be used with the DJI Mavic 3 Pro Drone with DJI RC.

Q: 6. There is a DJI Mavic 3 and a DJI Mini 3 Pro. Which is this for? Both?

A: The PolarPro Circular Polarizer Filter is compatible with the DJI Mini 3 with RC-N1 Remote and the DJI Mavic Mini 3 Pro.

Q: 7. Does this meet the FAA's Remote ID requirements?

A: Yes. The DJI Mavic 3 Pro drone is remote ID compliant.

Q: 8. How many batterys come with the cine premium bundle?

A: 3

Q: 9. What size would the camera sensor be when using the 166mm telephoto lens?

A: The DJI Mavic 3 Pro Cine Drone uses the 1/2″ CMOS sensor at the equivalent 166mm focal length.

Q: 10. I have DJI RC Pro Remote already with my Mavic 3 cine. Can I connect a DJI Mavic 3 Pro to my existing DJI RC Pro Remote?

A: Yes. The DJI RC PRO remote will work with the Mavic 3 Series including the DJI Mavic 3 Pro.

Paul	06/09/2024
[UV: Up to 99.5%] Good service 5

Kem	15/08/2024
[UV: Up to 99.5%] Since using these CDs my image looks absolutely much sharper, I highly recommend it for Mavic 2 Pro 5

Ryne	06/08/2024
[3-6] Picked these up as my first set of general purpose filters for my Mavic Pro. These are replacing the official DJI ones that I picked up with the Mavic. Those ones had thin plastic-looking tabs (3 of them) per piece and felt flimsy and due to the way they were made, appeared that they might let light into the lens. These ones however are a very sturdy and attractive machined aluminum in black with red accents. They completely conceal the lens like a helmet and there's no chance of light or particulate getting between the filter and the lens. Would definitely recommend if you're just getting into filters and need some all-arounders. If you live in habitually bright places like the American Southwest or somewhere along a beach, you may also want to consider a stronger filter - a 32 or 64. 5

Felix	03/08/2024
[3-6] Great filter for the money. Does a pretty good job and fits perfectly. 5

Mohammed	26/07/2024
[UV: Up to 99.5%] Although that we can adjust the aperture on M2P to shoot in daytime but this NDs make it even better setting the ND filter to desired degree and aperture at f4-f5.6 the image looks absolutely much sharper than f7.1-f11 Highly recommended for Mavic 2 Pro 5

Scott	24/07/2024
[UV: Up to 99.5%] This ND filter fits perfectly on my Mavic Air 2. My previous attempt at VND was a Polar Pro that would not attach to the camera, and I tried two different ones. So the Freewell is a keeper. I love the way I can easily change the amount of light to the camera and get back into the air. B&H had a great price too! 5

arbee	22/07/2024
[3-6] Easy to use. Very nice 5

Anson	19/07/2024
[0.2 oz / 6 g] The filters work as advertised. The fit and quality is excellent. Does not affect the camera, gimbal or flight. 5

Carlos	13/07/2024
[3-6] Muy buena calidad y presentación. Vino con un estuche protector al que se le pueden agregar 2 filtros más. Destacable la calidad de los accesorios para su limpieza. 5

James	27/06/2024
[0.2 oz / 6 g] I use this set on my Mavic 3 Enterprise drone and like the fact that these filters are made from glass, and have no unusual color cast. The Natural Polarizer works well and appears to be the same NiSi polarizer glass used on the NiSi Natural Polarizer made for the Nikon Z 14-24mm f/2.8 S Lens. This set will vignette in the corners on the 24mm Mavic Wide lens. The good news is that any vignetting is automatically removed in post by Lightroom. I shoot using .dng and .jpg so this is a non-issue for me. It may be an issue if you only capture images using the .jpg container. 5