Install two HDMI or USB terminals in your wall neatly with the black TechLogix Networx Dual-Port Blank Wall Plate. It enables snap-in installation of MOFO PT series HDMI or USB cables and terminals to provide a quick and easy installation.

Supports MOFO PT Series In-Wall Cables

Related Questions and Answers

Q: 1. What are the dimensions? In particular, the distance from center to center of the two added cold shoes? (To determine what gear will fit.)

A: The cold shoes are 4.5 inches apart from the center of each.

Q: 2. It's compatible with the SI IMPACT 32?

A: Yes. This card will work with the SI Impact.

Q: 3. If this has a 14.8v output and the camera has a 12v input, is there a risk of burning the camera?

A: There will be a risk of damaging your device from the extra current.

Q: 4. Once I connect the JST connectors, where am I supposed to tuck them into? The gap inside the battery plate, or the gap inside the Bolt 500XT transmitter?

A: As other users have defined, you can press the cable from the transmitter into the gap and align the connector to allow the battery plate to press into the opening. It's going to be a tight fit, but it should work.

Q: 5. Can this simultaneously power a camera (Panasonic S5) and monitor (Atomos Ninja V)?

A: The Hedbox Power V-Lock Plate Dual L-Series has a single D-Tap port that would need to be split with a D-Tap splitter in order to power multiple sources.

Q: 6. The specs say "D-Tap output: 14.8 VDC, 3.5A / 50W (max)"- so if I use this to power a 60w light (Godox ML60) I won't get full power?)

A: The power output only states a 13 to 14.8 volts at 6 amps. You will get the full power output for your light.

Q: 7. Will this Battery Plate fit the Indie 7 Monitor?

A: Yes, SmallHD Dual L-Series Battery Plate will allow you to utilize up to two Sony L Series Batteries. The Bracket installs directly to rear of 702 Touch, Cine 7, or Indie 7 monitors.

Q: 8. Is the Canon Vixia G40 video camera a camRanger compatible camera?

A: It is not. The CamRanger is not compatible with the Canon Vixia G40.

Q: 9. Has anyone used this with the BMPCC4k? How does it work and how long can you get out of it?

A: Yes this product works with the pocket 6K. It connects to the camera via a D-tap cable (here is an example) Core SWX Coiled D-Tap to 2-Pin Cable for Blackmagic Pocket 4K & 6K (18 to 48") BH #COPTCBMPC4 • MFR #PTC-BMPC4 The amount of time depends on the capacity of the batteries that you put on them. for example if you use 2 small batteries like the Watson NP-F550 Lithium-Ion Battery Pack (7.4V, 2200mAh) B&H # WANPF550 MFR # B-4203 You should get around an hour and a half. Depending on the batteries you choose you can get significantly more time but the batteries will be bulkier and heavier (the Watson NP-F975 Lithium-Ion Battery Pack (7.4V, 7800mAh) B&H # WANPF975 MFR # B-4206 should get you around 4 hours) You will also need a mount to put this on or near your camera. There are a number of options that work but they vary depending on how you set up your camera. if you have additional questions feel free to reach out to us via chat in the top right hand corner of the B&H website or via phone at 1-800-606-6969 ext 7207 for professional video and one of our specialists can assist you.

Q: 10. Will this work on the Teradek 4k bolt 750 LT transmitter?

A: No.