Polymaker 1.75mm PolyTerra PLA Filament Army Red 1kgfrom Polymaker 1.75mm PolyTerra PLA Filament Army Red 1kgis a PLA-based 3D printing filament designed with a focus on being environmentally friendly. It's made to deliver high printing quality and speed while being easy to use and reliable. It's made with a material from Polymaker called Fully Bio Compound (FBC), which is a compound of PLA bioplastic and a bio-composite. Polymaker offers it as a cost effective and eco-friendly solution. Polymaker also emphasizes that PolyTerra PLA can easily be removed.

PolyTerra PLA filament is compatible with most of the printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more. For best printing results, it's recommended to print PolyTerra PLA in temperatures between 374 to 446°F.

PolyTerra PLA can be printed at a wide range of speeds. Polymaker recommends speeds between 30 and 70mm/s, but they have successfully tested it on some printers at speeds up to 140mm/s.

If your printer has a direct-drive extruder, the recommended retraction distance is 1mm and the retraction speed is 20mm/s. If your printer has a Bowden extruder, the recommended retraction distance is 3mm and the retraction speed is 40mm/s.

PolyTerra PLA degrades under the specific conditions of industrial composting, namely, at certain temperatures and humidity with the presence of micro-organisms. The degrade rate will depend on the size and thickness of the printed part.

Due to Polymaker's heat treatment of the filament, PolyTerra PLA can withstand temperatures of 212°F. However, the printed PolyTerra PLA parts can only withstand temperatures up to 140°F because the crystallinity of the filament changes during the printing process.To glue PolyTerra PLA parts together, common glues used for PLA parts can be used. Polymaker suggests cyanoacrylate glue (superglue) as generally the best choice.

Is PolyTerra PLA food safe? Compliant with RoHS directives 2011/65/EU and (EU) 2015/863, and REACH regulation, PolyTerra PLA does not contain toxic or harmful substances. However, the printed PolyTerra PLA parts might have micro-cracks and holes which are invisible to the naked eye even though the prints look smooth. Bacteria are prone to grow in these micro-cracks and holes, so it is not recommended to use the printed parts in food contact applications.

For more information, please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.3.1 printer.

PLA Bioplastic & Biocomposite Compound    Compatible with Most 3D Printers    374 to 446°F Print Temperatures    30 to 70 mm/s Print Speed    Direct-Drive Retraction: 1mm / 20mm/s    Bowden Retraction: 3mm / 40mm/s    Heat Treated    Smooth Surface Finish    Recycled Cardboard Packaging and Spool

374 to 446°F

30 to 70mm/s

77 to 140°F

Glass, Blue Tape, BuildTak

On

Related Questions and Answers

Q: 1. What is the waist size for the women's V2 25 and 30?

A: Shimoda Designs Explore V2 both 25L and 30L Women's Backpacks waist belts expand from approximately 27" to 52".

Q: 2. What size laptop will it hold?

A: The Shimoda Designs Explore v2 35 Backpack Photo Starter Kit (Army Green) fits up to a 16" Laptop (10 x 15 x 0.8" / 25.5 x 38 x 2 cm)

Q: 3. Hi - does this only open from one side? The other side has the sleeves for filters but you cannot access the gear inside?

A: Yes, the Shimoda Designs Explore v2 30 Backpack Photo Starter Kit can only access the inside of the bag from one side pocket.

Q: 4. The specs say android 9. 7.1 is either the wrong answer or this catalog description is inaccurate? What is the OS Limit for the device?

A: I verifies with the manufacturer site that the Xenarc 7" RT71-PRO 128GB Rugged Tablet will run Android 9.0.

Q: 5. Will this bag + the large mirrorless core fit a sony 200-600?

A: For your Sony FE 200-600mm f/5.6-6.3 G, you will need the (Shimoda Designs Large Core Unit for Mirrorless Camera).

Q: 6. Will this fit under Airline seats?

A: Below-seat dimensions vary slightly by airline. As such, while the Shimoda Designs Explore v2 35 Backpack Photo Starter Kit (Black) may fit under some airline seats, it would be advantageous for you to check with the airline(s) on which you frequent to find their below-seat dimensions.

Q: 7. Can this fit the sigma 150-600 with the sony a7 111 attached

A: The Shimoda Designs Explore v2 35 Backpack Photo Starter Kit (Black) will fit the Sony a7 III Mirrorless Camera with the Sigma 150-600mm Lens attached if you use the Shimoda Designs Large DSLR Core Unit Version 2 (Parisian Nights), BH #SHCULDSLRV2P.

Q: 8. Will this fit as a personal item under the seat on a plane?

A: The Shimoda Designs Explore v2 35 Backpack Photo Starter Kit (Black) in most airlines will to large for under the seat. It is small enough as carry on but for over head. The average on most airlines for carry on is 22 x 14 x 9 inches. And it is different depending on the airlines.

Q: 9. is this compatible with the Explore series backpacks too?

A: According to Shimoda, all Shimoda straps are compatible with all Shimoda bags. The only issue is color matching - they do not offer the Action X strap style in the Blue Nights or Sea Pine colors. However, there is no issues with using the Plus straps on an Explore backpack.

Q: 10. Does the F-stop medium core unit fit (11.5" width, vs 11.4" for the for Shimoda unit)? I really like the strap connections on the F-stop unit for carry on.

A: Unfortunately, the F-Stop Medium Core Unit has not been tested specifically with the Shimoda Designs Explore v2 30 Photo Backpack to our knowledge. Your results may vary.