Polymaker 1.75mm PolyTerra PLA Filament Wood Brown 1kgfrom Polymaker 1.75mm PolyTerra PLA Filament Wood Brown 1kgis a PLA-based 3D printing filament designed with a focus on being environmentally friendly. It's made to deliver high printing quality and speed while being easy to use and reliable. It's made with a material from Polymaker called Fully Bio Compound (FBC), which is a compound of PLA bioplastic and a bio-composite. Polymaker offers it as a cost effective and eco-friendly solution. Polymaker also emphasizes that PolyTerra PLA can easily be removed.

PolyTerra PLA filament is compatible with most of the printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more. For best printing results, it's recommended to print PolyTerra PLA in temperatures between 374 to 446°F.

PolyTerra PLA can be printed at a wide range of speeds. Polymaker recommends speeds between 30 and 70mm/s, but they have successfully tested it on some printers at speeds up to 140mm/s.

If your printer has a direct-drive extruder, the recommended retraction distance is 1mm and the retraction speed is 20mm/s. If your printer has a Bowden extruder, the recommended retraction distance is 3mm and the retraction speed is 40mm/s.

PolyTerra PLA degrades under the specific conditions of industrial composting, namely, at certain temperatures and humidity with the presence of micro-organisms. The degrade rate will depend on the size and thickness of the printed part.

Due to Polymaker's heat treatment of the filament, PolyTerra PLA can withstand temperatures of 212°F. However, the printed PolyTerra PLA parts can only withstand temperatures up to 140°F because the crystallinity of the filament changes during the printing process.To glue PolyTerra PLA parts together, common glues used for PLA parts can be used. Polymaker suggests cyanoacrylate glue (superglue) as generally the best choice.

Is PolyTerra PLA food safe? Compliant with RoHS directives 2011/65/EU and (EU) 2015/863, and REACH regulation, PolyTerra PLA does not contain toxic or harmful substances. However, the printed PolyTerra PLA parts might have micro-cracks and holes which are invisible to the naked eye even though the prints look smooth. Bacteria are prone to grow in these micro-cracks and holes, so it is not recommended to use the printed parts in food contact applications.

For more information, please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.3.1 printer.

PLA Bioplastic & Biocomposite Compound    Compatible with Most 3D Printers    374 to 446°F Print Temperatures    30 to 70 mm/s Print Speed    Direct-Drive Retraction: 1mm / 20mm/s    Bowden Retraction: 3mm / 40mm/s    Heat Treated    Smooth Surface Finish    Recycled Cardboard Packaging and Spool

374 to 446°F

30 to 70mm/s

77 to 140°F

Glass, Blue Tape, BuildTak

On

Related Questions and Answers

Q: 1. are L-515 parts solid wood or laminates?

A: The Yamaha L515 Matching Wood Stand for P-515 Piano (Black) is made of laminated wood.

Q: 2. Will this fit R6 Mii with rf 100-500mm attached and a 90D body and 18-135mm lens?

A: The Domke Sling Bag (Black Nylon, 6L) would be too small to fit the R6 Mark 2 and the 100-500mm lens attached.

Q: 3. Would a Z8 with L-bracket still be easily taken in and out of this bag? Preferably while carrying an extra f4 zoom or prime lens

A: There will be no problem with the Z8 with L Bracket attached and extra lens as you describe being taken in or out of the Domke Sling Bag (Black Nylon, 6L).

Q: 4. can wood be stained or painted after treatment for set design?

A: According to Rosco, wood that has been treated with Flamex WD may be painted or stained after treatment.

Q: 5. Would an Oly OMD-EM1X fit comfortably in this bag?

A: The interior dimensions of the Domke Sling Bag (Black Nylon, 6L) are 10.5 x 5 x 2". It will fit the Olympus OM-D E-M1X Mirrorless Camera with a lens attached.

Q: 6. Are there loops/straps on the bottom for attaching a tripod or similar item?

A: compagnon Element Backpack (Desert Brown, 20L) accepts the tripod on the side of the bag. Same place where you could place a large water bottle. The bottom of the case does not have straps.

Q: 7. will it fit canon 10x32 roof prism IS binocular ???

A: The Dorr Leather Binocular Case (Large) would be too small for the Canon 10x32. This Steiner case would be a better fit: https://bhpho.to/3OsXj9F

Q: 8. How durable are the shoulder straps and seams? I've been disappointed with the poor quality of some expensive big name packs.

A: The shoulder straps and seams on the compagnon Element Backpack (Volcano Black, 20L) are durable.

Q: 9. Are there water bottle pockets on the external side?

A: Yes, the compagnon Element Sling (Volcano Black, 7L) features two side slots for water bottles, which can hold various small items as well.

Q: 10. Will this bag fit R6 M II with Rf 100-500mm attached?

A: Yes, you will be able to fit the R6 MKII with an RF 100-500mm lens attached into the Domke Sling Bag (Black Nylon, 6L).