Looking for a portable and versatile active speaker for live sound applications? Then look no further than the Mackie Thump215XT 15" Powered PA Loudspeaker System with DSP and Bluetooth, a powerful PA speaker that includes a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The system features four application-specific voicing modes, an outdoor mode, and Bluetooth for streaming, speaker link, and wireless control.

The Thump215XT's mixer features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. A 3.5mm TRS aux input is also available on channel 2 for connecting your favorite portable player. The tough, impact-resistant polypropylene enclosure ensure protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. Additionally, M10 fly points are included for permanent installation. The angled design allows the speaker to be used as a floor monitor for onstage performance monitoring.

Portable PA for Live Sound Applications    2-Channel Mixer with Gain Controls    Combo XLR-1/4" Inputs + 3.5mm Aux Input    Four Application Specific Voicing Modes    Outdoor Mode for Open Air Venues    Built-In Limiters for System Protection    Feedback Eliminator and Music Ducking    BT: For Streaming, Speaker Link, Control    Use on Stand or as Floor Monitor    Includes Power Cord

• 1400W ultraefficient Class-D amplifier
• Built-Like-A-Tank to conquer every gig while lightweight for easy loading
• Frequency response: 40 Hz to 20 kHz
• Max SPL: 129 dB
• 15” high-performance woofer
• 1” compression driver
• Outdoor mode optimizes voicing for open air venues
• Built-in Feedback Eliminator reduces squeals and out of control rumble
• Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives signal
• Front LED On/Off switch
• Standard pole mount
• M10 flypoints for permanent install
• Monitor wedge provides optimal angle for use as a floor monitor
• Universal power supply

Under the hood of ThumpXT is some powerful processing that you can tap into to up your sound quality game. With 4 different application-specific voicing modes, you can instantly optimize your speakers for how you use them at the push of a single button.

• Music: Made to enhance pre-recorded music
• Live: Great for general sound reinforcement
• Club: Provides a low-end punch
• Monitor: Optimizes the speaker for use as a floor wedge keeping feedback in check

Ever bring your speakers from inside a room to the scary outdoors and wonder why it sounds so different? You're not alone, and lucky for you we've thought of everything. When you set up your system out in the wild, just push the Outdoor Mode button and your lovely, full sound is restored.

Easily stream music directly to the speaker and enjoy the wireless freedom to dance around while playing DJ. And while you’re at it, you can dive into the Thump Connect 2 App and adjust anything from system EQ and Voicing Modes to channel levels and venue-specific presets.

• Bluetooth connectivity for streaming, speaker linking, and control
• Download the Thump Connect 2 app for complete wireless control
• Link 2 ThumpXT loudspeakers for a powerful, wireless, music playback system in both stereo and dual-zone configuration

• Channel 1 features a combo XLR-1/4" input that accepts mic or line signals
• Channel 2 features a combo XLR-1/4" line input plus stereo 3.5mm input
• Thru output contains audio from both input channels

These are the loudest, most powerful, and best sounding Thump loudspeakers ever, and they are ready to take on your most demanding gigs. Completely redesigned from the ground up, Thump has beefier drivers, 1400W Class-D amplifiers, and powerful tools to make your next gig easier than ever.

You've got music playing nice and loud, but it's time for another announcement. Sure, you could mess with your levels every time, but who's got time for that. Simply press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1.

Ever get a little too up close and personal with the microphone only to hear a loud, ear-destroying squeal? That's commonly known as feedback. And it's an unfortunate issue that physics won't change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws.

Related Questions and Answers

Q: 1. can you connect to two of these at the same time?

A: Yes. To do so; You would go from the Mix Out stereo outputs on one Pyle speaker, to the Line In stereo inputs on your 2nd Pyle speaker, using this Kopul RCA cable (B&H # KOSRC4015). https://www.bhphotovideo.com/c/product/1022848-REG/kopul_src_4015_stereo_rca_cable_15.html

Q: 2. Can you tell me how to connect it to my TV?

A: Using the directional pad on your remote, navigate to and select Settings. Select Sound Output to select your preferred sound output device. Select Bluetooth Audio to begin pairing your Bluetooth audio device.

Q: 3. What type woofer magnet on Pyle Pro HP1535 WMU, THANKS

A: Hi, Thank you for reaching out. 5 magnet and 12 cone

Q: 4. What type of battery does the wireless microphone use? Is it proprietary or changeable like AA? How long does the microphone battery last on each side of it? Does the microphone have a receiver unit or does the speaker have a built in receiver?

A: Don’t know the rest, but it’s regular AA batteries for the microphone

Q: 5. How do you connect the wireless microphone to the speaker system? I was able to connect to a phone not the mics.

A: First, make sure that the wireless microphone transmitters have fresh batteries, then turn on the power for the transmitter you want to use, make sure the power for the Pyle Pro PPHP109WMU Loudspeaker System is on and turn up the mic volume as well as the master volume. While trying to get the wireless mics to work, I would advise that you not have any other audio devices connected to the wired or Bluetooth inputs, just to help you to troubleshoot only the wireless microphones. If you are still having problems, please contact us by phone or through live chat on the website so we can assist you further.

Q: 6. Is there a better wireless mic to use with this unit? When I use this outdoors and am roaming over a it keeps cutting out.

A: The Pyle Pro PPHP109WMU 10" 2-Way 1000W Bluetooth-Enabled PA Loudspeaker System could be used with a wireless microphone system with a 1/4" receiver, such as BH #GEGMUM100.

Q: 7. This loudspeaker system came with 2 mic holders that screw on. Where do they attach?

A: The microphone holders, also known as clips, attach to a microphone stand, not included. https://www.bhphotovideo.com/c/product/755884-REG/auray_ms_5130_round_base_microphone.html

Q: 8. What type woofer magnet

A: It's a Subwoofer with Frequency 75-18kHz (-10dB)

Q: 9. Are the RCA inputs "line level" such as for iPod or iPad?

A: Yes, the RCA input is a line level input, so will accept an iPod or iPad audio.

Q: 10. Can you link two of these together with the appropriate link cable?

A: You could run the RCA mix output from the first speaker to the RCA Line Input on the second. That will send all audio from speaker 1 to speaker 2. Please note, you can only use the wireless mics from the first speaker set though, as turning on the second speakers mics would cancel out the first set.