The K 5600 Lighting Softube for Joker-Bug 800is an accessory for the Joker-Bug 800 Light that transforms the narrow light into a soft, even, and linear source. The Softube traps the light and then uses reflections to emit the light. The unit consists of an attachment ring, a translucent Joker Gel, and a mirror cap. Additionally, it includes a case for storage of the Softube and its parts.

Soft and Linear Light

Related Questions and Answers

Q: 1. How about a description of this kit in the product placement on the website?

A: Joker 800The Joker 800, designed around a UV-block bulb originally commissioned by K5600, was the first unit of this wattage introduced on the market.More Output in LightbanksDesigned specifically to take full advantage of the large reflective material inside a Lightbank, this fixture provides 50% more output than a regular PAR 1200W, and a better spread of light thanks to the bare-bulb design of the Bug-Lite.Two Beamers AvailableLike the Joker 1600W, the Joker 800W can be used with two different Beamers :The PAR beamer which features a specular reflector and can be used with the classic set of four lenses supplied in all Joker-Bug kits (Medium, Wide, Super Wide and Frosted Fresnel).The Zoom Beamer which consists of a segmented reflector, focusable from 15 to 55 degrees.High Speed Ballast & Wireless CapabilitiesThe 800W comes with a dimmable ballast, which is able to work at 300 or 1000 Hz frequencies for High Speed shoots. Using the Lumenradio protocol, the new ballast now has an antenna and DMX panel allowing for it to be controlled via a tablet or smartphone. Convenience & TravelComing in a hard case like the other units in the Joker line, the 800W is easy to take on flights making it the ideal travel companions for gaffers. The complete kit weighs only 47lbs and is compact making it perfect for tiny spaces, and can be run on domestic electrical supply

Q: 2. Does this ever need to be replaced, does it wear out?

A: This K5600 Pyrex Safely Glass for Alpha 4K is generally long lasting.

Q: 3. Can the c-800 measure flicker in the incident light? If not is there a different model that will measure flicker?

A: No, this light meter cannot do that. The C-800 will measure all visible spectrum colors and also brightness. If you'd like to measure the flicker of your light, you can set your light to the desired power setting (typically 20-50% if doing so specifically for measuring flicker) and adjust the shutter speed of your camera until you see indications of uneven exposure such as dark bands or stripes in the frame. Please note that you can often defeat flicker by turning up a light to 100%, or in still photography by shutting off a silent shutter or front electronic curtain shutter setting. Many modern mirrorless or DSLR cameras also feature anti-flicker settings which can delay a shutter release just enough (mere microseconds) to take advantage of the moments in the flicker cycle when the light is most consistent. The Gossen MAVOSPEC BASE Industrial Light Meter (BH #GOM521) will measure flicker, and it typically is used for industrial purposes as it lacks certain photography-oriented features of the Sekonic C-800 such as measuring flash duration for exposure. It would be useful if you are testing lights and aren't concerned about setting your exposure, however: https://bhpho.to/3qlOuj4

Q: 4. Does this kit include the case? lenses, ballast?

A: The Joker2 800w Kit includes Head, Ballast, UV Stop Se lamp, Joker Beamer, Clear and Frosted UV Protection Beaker, 25' extn cable, Barndoor, 4Pc Lens set w/rings, 3 Pc scrim set, Hard White Carrying Case. K 5600 part number is K0800JB2

Q: 5. What's the CRI rating?

A: The K 5600 Lighting Joker2 800W Kit BH #K5K0800JB2 does not have a CRI rating.

Q: 6. It says that you can dim the lights, and it uses Pulse Width Modulation. Curious, if shooting Slow Motion work 120P to 240P, would these show any signs of fliker from the PWM? Thanks!

A: You should not have any flicker at those rates. The ballast is adjustable up to 100,000 Hz . The ballast is factory set at 66.67 hz. Even at 24kHz you would be fine.

Q: 7. Can I use this bulb as a replacement for a 1000w rated lamp that I have been running with a g9.5 1000w tungsten bulb/ Id like to switch to daylight bulbs, but keep the same photo lights. Is the possible?

A: No, HMI lamps require a specially designed fixture with a special transformer (ballast) that regulates the power going to the fixture.

Q: 8. Does this have a fan in either the head or the power supply? How loud is it if present?

A: Yes, both the head and power supply have extremely quiet fans.

Q: 9. Is this meter also a light meter measuring incident and spot?

A: The main function of this meter is to measure color, but it can also provide readings in foot candles.

Q: 10. Does anyone fully understand the bicolor aspect of this light? I've been watching NAB videos and it seems like the balast is universal but you may have to swap the head for tungsten 2k open face mode.. Don't quite understand yet. thanks!

A: For the Joker2 1600 and our Joker2 800 their is an alternate rear cap that will be available in about 8 weeks that will allow you to mount a Tungsten 2k or 1k lamp in the same socket as the daylight version. The igniter cap is removed by Two screws and un-clipped from the buglite head. You can the mount the alternate rear cap that has an on/off switch and plug so you may use the tungsten lamps. This allows you a 2k/1k Tungsten Par or buglite when you need it without having to carry an additional fixture. This is a very quick, simple swap of caps.