Rcf C5215-94 15" 500W Passive Speaker

Rcf C5215-94 15" 500w Passive Speaker

Product Code: eq10842
Availability: In Stock

$5,997.00 $9,595.20

Qty

7 reviews Write a review

Description
Reviews (7)

The black C5215-94 15” 500W Two-Way Passive Speaker from RCF belongs to the Acustica Compact Series and is a full range and versatile wide-dispersion, two-way loudspeaker offering substantial power and efficiency for several professional applications. It can be used as a main unit in permanent installations, or as a supplementary fill in large speaker systems.

RCF's exclusive Constant Matching Design technology allows for an optimal transition between the high-frequency horn polar pattern and the low-frequency woofer directivity. The horn can be rotated, allowing you to install the loudspeaker either vertically or horizontally. The high-frequency transducer is a 1.5" (38.1mm) RCF PRECISION compression driver with a 2.5” (63.5mm) voice coil. The low-frequency transducer is a 15” (381mm) RCF PRECISION woofer with a 3” (76.2mm) voice coil.

The speaker includes a high-level crossover network, LICC (Low Impedance Compensated Crossover) that features markedly lower (than conventional) induction values in series with the woofer. The benefits of LICC are delay reduction, reduced phase shift, and superior transient response. Dynamic high-frequency driver protection is accomplished with an AMCDP (Active MOSFET Compression Driver Protection) system, chosen to complement the driver power curve.

The internal crossover can be easily bypassed for bi-amplification. The cabinet is made of Baltic birch (heavy-duty painted) and allow different installation options, as it is equipped with top and bottom multiplates for either wall or suspended mounting with chains. Installation points are available on its rear panel as well. The steel front grille is protected with a double layer polyurethane fabric. The front RCF logo is easily rotatable. Connections are made through 2 Neutrik Speakon NL4 connectors (audio input and parallel link output).

Parameters
Frequency Response	-10 dB: 48 Hz to 20 kHz
Coverage Angle	Horizontal 90° Vertical 40°
Directivity	Q: 14
Sensitivity	100 dB at 1 W and 3.3' (1.0 m)
Maximum SPL	Peak Power 3.3' (1.0 m): 133 dB
Impedance	8 Ω
Power	RMS: 500 W Peak: 2,000 W
Recommended Amplifier Power	1,000 W
Protection	HF: Dynamic
Crossover	1.2 kHz
Transducer	15" (381 mm) Woofer with 3.0" (76.2 mm) Voice Coil Low Frequency Range Impedance: 8 Ω Power: AES: 400 W Peak: 800 W Sensitivity: 99 dB 1 W and 3.3' (1.0 m) 1.5" (38.1 mm) Driver with 2.5" (63.5 mm) Voice Coil High Frequency Range Impedance: 8 Ω Power: AES: 100 W Peak: 200 W Sensitivity: 111 dB 1 W and 3.3' (1.0 m)
Enclosure	Trapezoidal, 20° side angles, 0.6" (15.0 mm) birch plywood construction
Rigging Points	Lateral 2 x M10 Top and Bottom: Multiplates
Grille	Perforated powder-coated steel covered with double layer polyurethane fabric
Input Connector	2 x SPEAKON NL4
Dimensions	16.9 x 27.4 x 18.11" (430.0 x 694.9 x 460.0 mm)
Weight	76.7 lb (34.8 kg)

One 15" (381mm) RCF PRECISION woofer with 3" (76.2mm) voice coil

One 1.5" (38.1mm) RCF PRECISION compression driver

90 x 40° CMD (Constant Matching Design) constant directivity horn

Rotatable horn for horizontal mounting

Dual-Function Design: Built-in passive crossover or external bi-amp

Trapezoidal enclosure made of 15mm birch plywood

HF driver AMCDP (Active MOSFET Compression Driver Protection)

LICC (Low Impedance Compensated Crossover) network

Rigging Inserts: 2 x M10 (lateral)

2 top and bottom multiplates for mounting

Main Applications: Permanent installations, main reinforcement in small and medium spaces, high-level AV playback, live music reinforcement, and large speech systems

14 suspension points (M10)

35mm standard internal pole mount

High-efficiency design

Related Questions and Answers

Q: 1. Can you add another wireless microphone?

A: Yes, you can purchase a separate wireless microphone system to connect to the 1/4" mic input on the Pyle Pro PWMKRDJ84BT 500W Portable PA Speaker. Since the PWMKRDJ84BT has two inputs, you can add two wireless mic systems to use together with the included wireless microphone.

Q: 2. $231.00 Wired Companion version: if i buy this, can i connect this to smartphone via bluetooth to play music or announcement? and also could i be able to connect Telex Model 450D 200Ohm Dynamic Push-to-Talk Microphone 1/4" as well?

A: No. This is an add on speaker to the MegaVox 2 and has no bluetooth or or mic connectvity.

Q: 3. Does it fit the RCF ART735A Model?

A: The ART COVER 715 will fit the ART 735A speaker.

Q: 4. Can I connect a separate tweeter system to this speaker such as the Pyle Pro PAHT7 6-Way DJ Tweeter System?

A: A separate tweeter system cannot be connected to this P.A.speaker. The end-user does not have access to its crossover network.

Q: 5. what voltage is applicable in USA for this unit ?

A: 110 to 120 VAC (50/60 Hz), 24 VDC

Q: 6. I'm not familiar pass through. If I have an amp sending 600w out the channel, and then two speakers are connected, will the power be halved? Or will each speaker see 600w?

A: If your amplifier is a stereo amp (two channels), at 600 watts per channel at 8 ohms, then it will be appropriate for two of these speakers. A single-channel amplifier would have to put out 1200 watts at 4 ohms in order to power two of these speakers. Please call our Pro Audio Department at 800.606.6969 to better assist you.

Q: 7. Idol pro IP -300 has 2 channels 500w+500w 4ohm,350w+350w8ohmpoweroutput(RMS) and 3500w+3500w power(peak) is fit jbl prx412m

A: A pair of the JBL PRX412M Two-Way 12" Passive Speakers can be used with the IDOlpro IP-300 Digital Amplifier. The amp has banana connectors and the speakers have combo jacks that accept Speakon NL-2 or 1/4" connectors.

Q: 8. Can I connect a subwoofer to the speakers directly Thks

A: No. The JBL SRX815 15" Two-Way Bass Reflex Passive System is a passive speaker, so it needs to be connected to a power amplifier. Depending on the subwoofer you select, if it is passive, it will also need to be connected to a power amp, while an active speaker has the amplifier built-in. If you are using a mixer, the mixer's output will connect to the input on the power amp(s) and the speakers will connect to the output from the power amps.

Q: 9. How many fully loaded cases can this model handle (prox x-rcf -alax4w)

A: According to the manufacturer, you can stack up to three of the ProX X-RCF-HDL6A LA X4W Flight Cases for 4 RCF HDL6-A Speakers that are fully loaded.

Q: 10. Is the Crown XLi 1500 capable of powering 2 of these speakers?

A: Yes, the Crown XLi 1500 Stereo Power Amplifier can be used to power a pair of the Yamaha CBR15 Portable 2-Way 15" 1000W Passive Loudspeakers.

Jonathan	29/09/2024
[8 Ω] Super duper, great choice, could not recommend them more highly. Rich sound with lots of power, and, absurdly straight forward settings. Be aware these are big boys, they are not lightweight for moving around. 5

William	09/09/2024
[8 Ω] The Velvet Sledgehammer. Crossover point to the mid-horn is 320 Hz, and xover to the high horn is 1200 Hz. That means your top 6 octaves are now behind a waveguide. The result? You can actually hear more at the back of the audience, and not just because the box itself is louder. Audience members were approaching me about how much better the concert sounded this week than last week, and they were actually right for once. With the RCF NX 985-A we have unlocked Easy Mode for our outdoor concert series. The padded covers are highly recommended and an excellent value themselves. 5

Steve	25/08/2024
[2 x SPEAKON NL4] First of all, I commend the staff from beginning to the end. The original phone order went through great. The item was in stock and shipped quickly. Took a little longer buy I was ok. Minor damage to the speaker grilles upon receiving them. I sent an email to B&H. Very cordial and helpful to correct my problem. THEY worked it out with the manufacturer for me to receive 2 new replacement grilles. They arrived quickly within a week along with a return label for the damaged ones. WHEN YOU WANT THE BEST GO TO THE BEST...B&H PhotoVideo. Thanks guys for a GREAT transaction and making me a happy customer. 5

Roscomar	04/07/2024
[2 x SPEAKON NL4] Provides excellent protection with easy access to side and top carrying handles. You can even access the front and rear of the mounted speaker without removing the entire cover if you want. I'm really glad I purchased these. 5

Fool on the Hill	02/07/2024
[2 x SPEAKON NL4] You cant move this speaker without having this cover. Its super well made and the design compliments every aspect of the speaker design. It keeps my speakers in top notch condition. 5