Bescor Vw-Vbd58 Dummy Battery For Cameras

Bescor Vw-vbd58 Dummy Battery For Cameras

Product Code: eq108647
Availability: In Stock

$101.97 $162.13

Qty

7 reviews Write a review

Description
Reviews (7)

Power a wide range of Panasonic cameras with the VW-VBD58 Dummy Battery from Bescor. Mount the dummy battery on select Panasonic cameras and any other devices that use AG-VBR59 and VW-VBD58 batteries to provide continuous power for your production, using an optional power adapter.

For Devices Using AG-VBR59 Batteries For Devices Using VW-VBD58 Batteries

Parameters
Quantity	1
Power
Power Source	AC Adapter with Power Brick (Not Included)
Power I/O	1x Barrel Female Input
Maximum Power Output	7.2 VDC
Physical
Color	Black

Blackmagic Design URSA Broadcast
Dolgin Engineering TC40
Panasonic AG-AC30
Panasonic AG-AC8
Panasonic AG-AC90A
Panasonic AG-BRD50P
Panasonic AG-CX10
Panasonic AG-CX350
Panasonic AG-CX350PJ5
Panasonic AG-DVX200
Panasonic AG-MDC20GJ
Panasonic AG-MDR25PJ
Panasonic AG-UCK20GJ
Panasonic AG-UMR20
Panasonic AG-UX180
Panasonic AG-UX90
Panasonic AJ-PG50
Panasonic AJ-PX230
Panasonic AJ-PX270
Panasonic AU-EVA1 EF-Mount
Panasonic DC-BGH1 MFT-Mount
Panasonic DC-BS1H L-Mount
Panasonic HC-MDH2
Panasonic HC-MDH3
Panasonic HC-MDH3 PAL
Panasonic HC-X1
Panasonic HC-X1000
Panasonic HC-X1500
Panasonic HC-X2000

Related Questions and Answers

Q: 1. Will this work with the Panasonic AG-HPX250?

A: Yes, the IndiPRO Tools AC Power Supply with Panasonic VW-VBD58 Dummy Battery would be able to power the Panasonic HPX250 camcorder.

Q: 2. Is this adapter compatible with the Panasonic ag-hpx170p?

A: Yes, the IndiPRO Tools AC Power Supply with Panasonic VW-VBD58 Dummy Battery (8V, 8') should work with the Panasonic AG-HPX170 P2HD Solid-State Camcorder (B&H # PAAGHPX170).

Q: 3. This isn't working in my XT-3. Is there something I missed? Is this incompatible with that camera?

A: There is no reason why it shouldn't work. I would exchange it for another unit.

Q: 4. I think i know the answer based on the other Q&A - will work properly with the X-Pro2?

A: Yes

Q: 5. I wanted to ask if there is a connector that can convert the female pin/outlet from a 4-pin to a D-pin of barrel pin so that it can be connected to Battery Adapter instead of direct AC. I have looked around and failed to get a connector. Also what is the actual name of the outlet female 4-pin ?

A: The Bescor EP5 Dummy Battery for Select Nikon Cameras is designed specifically for use with the Nikon EH5 AC adapter. There is not an option to change the plug on the above dummy battery cable. The LanParte E15 Battery Dummy Pack is an option that has a female DC barrel connector,

Q: 6. Does this power supply convert the 14.4V coming from my V-Mount batteries to a safe for the X-T3 7.2V? I assume it does but it doesn't explicitly say this anywhere and I don't want to fry my X-T3 with double the rated voltage input.

A: Yes, the Bescor NPW126SDTAP Coupler/Dummy Battery & D-Tap Adapter Kit for Select FUJIFILM X-Series Cameras (B&H# BENPW126SDTP) kit, when used as a whole (i.e. with both its D-Tap style plug and cable and dummy battery) will convert the voltage to the appropriate level for your camera from a 14.4V, 14.6V, or 14.8V power source. Typically, that source would be a V-Mount battery. More than 90 percent of V-mount batteries sold are in the 14-14.8V voltage range, and those will be fine. Please do not use the Bescor NPW126SDTAP Coupler/Dummy Battery & D-Tap Adapter Kit for Select FUJIFILM X-Series Cameras (B&H# BENPW126SDTP) with batteries or power supplies of other voltages such as 12.6V, 26V, or 28V.

Q: 7. Does it support 220V?

A: The AC adapter supports 100-240V/50-60Hz.

Q: 8. Will this also work with the X-T20? I see the battery is the same.

A: Yes, it will work with the XT20.

Q: 9. Will this work on an eva1

A: No, I do not think the IndiPRO Tools AC Power Supply with Panasonic VW-VBD58 Dummy Battery (8V, 8') could work with the Panasonic EVA1. Another better solution would be this D-Tap cable and power supply listed below: IndiPRO Tools Regulated D-Tap Cable for Panasonic AU-EVA1 Camera & AG Series Camcorders (24") BH #INDTEVA24 IndiPRO Tools 12V/6A AC Wall Plug to 2 x D-Tap Female Y-Cable Adapter BH #INACDFDT1

Q: 10. Will this provide the proper output voltage of the input is lower than 14 volts? Mine will be providing about 7.4 volts. Thanks!

A: The Bescor NPW126SDTAP Coupler/Dummy Battery & D-Tap Adapter Kit for Select FUJIFILM X-Series Cameras is regulated to output the proper power for the following FUJIFILM cameras: - X100F - X100V - X-Pro3 - X-T3 - X-T30

Kevin	02/08/2024
[1] The power source works perfectly in our Olympus OM-D E-M10 II & III cameras. For the E-M10 II camera you have to leave the battery hatch open, to accommodate the cord, but it still works fine. 5

Akili	09/07/2024
[1] I am just ecstatic with this product!! 6 months ago, when my job switched me to full time telecommuting, it was clear that I was going o have VERY important meetings vie zoom, Skype and teams. I could NOT use my cell phone or the whack webcam built into my iMac. I needed to figure out how to use my Olympus EM10 MIII mirrorless camera as a webcam so that I could stream with clear video for longer than an hour. My camera does NOT have a ac jack for power and the batteries last for 1 hour, tops. Even after I jumped through a million hoops and figured out how to use a capture card to connect my camera to my CPU as a webcam, in every meeting, my camera would die and I would replace it mid-meeting. I kept 3 fully charged batteries on standby at all times. That SUCKED! With this, I no longer worry about my battery running out. It works perfectly!! I mean, PERFECTLY!! If you are using your Olympus camera as a webcam and you need a steady power supply, this works. I'm so glad it was released right before my first zoom deposition. 5

Yoland	04/07/2024
[1] Produit de trs bonne qualit et livraison rapide. 5

Richard	06/06/2024
[Black] One of the Q&A’s says the Bescor BLS50AC dummy battery adapter kit is not compatible with the Olympus E-PL9. I asked Bescor ( answers@bescor.com ) why the kit is compatible with the Olympus OM-D E-M5/M10, but not the Olympus Pen E PL9, since all three use the same Olympus BLS-50 battery. The response was: “It will work. Your camera just needs to be added to our list.” The Bescor is 8V 3A. The Olympus battery is 7.2V 1175 mAh (1.175A). I did some online research to see if a device built for 7.2V could operate at 8V. One person describing himself as an engineer posted that 7.4V Lithium batteries actually span a 6V to 8.4v voltage range depending on state of charge of the battery. Another “senior electrical engineer” said that because all devices are designed with some voltage tolerance value, a 7.4 volt device means 7.4 volt +/- 1 to 1.5 volts. Still other posts indicated that you can use a 3A power adapter on a 1.5A device. By logical extension, I figured (I don’t actually know) that since the PL9 uses a 7.2 volt battery, it is probably designed to also work at 8 volts, and is also okay running at 3A. Based on the response from Bescor and the Internet voltage and amperage responses, I decided to purchase the Bescor and use it with my PL9. I haven’t seen any sign of overheating or other problems with this setup so far, but will update this review if that changes. I did not deduct points for the need to leave the battery compartment open because I knew that would be the case when I bought it. 5

Carlos	25/05/2024
[1] Included everything I needed to keep an OM-D EM-10 mark II powered for long sessions on a tripod. One note - the battery door will not close, as such you may need to position the camera carefully to fit a tripod mount, but the battery clip holds the dummy battery fine while the door is open. 5

Darryl	07/05/2024
[1] I bought this for my Panasonic HC-X2 so I wouldn't have to rely on the battery for some indoor stationary shoots. Absolutely no problems using the unit. The plastic casing seems somewhat flimsy compared to the quality of the materials of the camera, but it looks like it can stand up to normal wear and tear. 5

Timothy	19/04/2024
[Black] I needed a dummy battery to power my Olympus mirrorless camera while using it for streaming. This option from Bescor does the job and I have had zero issues with it thus far. I would recommend this product to anyone who is in need of powering their Olympus camera with an exterior power source. 5